HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 108 Detailed Info: Set Channel Speed Operation
DescriptionItem
The name of the port that the host speed (data transfer speed) is set.Port
The host speed set. The unit is Gbps (G
igabits per second). When Auto is set for the host
speed, Auto is output.
Speed(Gbps)
The number of ports where the host speed is set.Num. of Ports
LUN Manager (LUNM) - Set Command Device (CommandDev)
Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set CommandDev,,Normal end,,,
Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUMN]
LUN Manager function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 109 Detailed Info: Set Command Device (CommandDev) Operation
DescriptionItem
The LDKC, CU and LDEV numbers of the logical volume where the command device
setting is changed.
LDKC:CU:LDEV
Indicates whether the command device setting is enabled or disabled.CommandDev
Disable or Enable is output.
The number of logical volumes where the command device setting is changed.Num. of LDEVs
XP24000 Audit Log User and Reference Guide 127