HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Enable 60 sec is the selected parameter. The operation uses the following parameters, as shown in

the following table.

Table 142 Parameters: Monitoring Switch (SW) Operation

DescriptionParameter

Monitoring is enabled and the gathering interval is set as XX sec.Enable XXsec

Monitoring is disabled.Disable

Normal end

The operation has ended normally.

Seq.=xxxxxx

Sequence number of log information (0000000000 to 4294967295).

Performance Monitor (PFM) - Monitoring Switch (S/W) and

CU Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PFM], Monitoring S/W & CU, Enable 60sec ,

Normal end,,,Seq.=xxxxx

[PFM]

Performance Monitor function

Monitoring S/W & CU

Monitoring Options operation

Enable 60sec

Enable 60 sec is selected as the parameter. The operation uses the following parameters, as shown

in the following table.

Table 143 Parameters: Monitoring Switch (SW) Operation