HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Remote Control Unit (RCU) - Change RCU Option Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Change RCU Option,,Normal end,,,
Seq.=xxxxx
+{S/N,LDKC,Path Gr. ID,Controller ID,Min. Path,MIH Time(s), Round Trip Time(ms),
Incident,
FREEZE}={99999,0x00,Default,4,08,015,001,only to RCU host,Disable}
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Change RCU Option,,Normal end,,,
Seq.=xxxxx
+{S/N,LDKC,SSID,Controller ID,Min. Path,MIH Time(s), Round Trip Time(ms),Incident,
FREEZE}={99999,0x00,0x0004,4,08,015,001,only to RCU host,Disable}
[RCU]
Remote Control Unit function
Change RCU Option
Change Remote Control Unit Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 153 Detailed Info: Change RCU Option
DescriptionItem
Indicates a serial number of the RCU device where the RCU option setting is changed.S/N
The LDKC number of the paired LDKC.LDKC
The RCU path group ID where the RCU optional setting is changed. When the path
group ID is default setting, Default is output.
Path Gr. ID
The controller ID of the RCU where the optional setting is changed.Controller ID
Indicates SSID of the RCU where the optional setting is changed.SSID
The minimum number of paths after change.Min. Path
The value of RIO MIH (Remote I/O Missing Interrupt Handler) timer (wait time until data
copy from MCU to RCU is completed). The unit represents seconds.
MIH Time(s)
XP24000 Audit Log User and Reference Guide 163