HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

HP XP Continuous Access Software - Change Async Option
Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Change Async Option,,Normal end,,,
Seq.=xxxxx
+{CLPR,Rate(%),Delay Start(%),Delay Increase(%)}={00,050,030,040}
[TC]
HP XP Continuous Access Software function
Change Async Option
Change Async Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 174 Detailed Info: Change Async Option
DescriptionItem
The CLPR number.CLPR
The value set to the pending update data rate.Rate(%)
The value set to the I/O Delay Start value (the threshold that the inflow control of
asynchronous copy starts).
Delay Start(%)
The value set to the I/O Delay Increase value (the threshold that the inflow control of
asynchronous copy increases).
Delay Increase(%)
HP XP Continuous Access Software - Change Consistency
Group (CTG) Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Change CTG Option,,Normal end,,,
Seq.=xxxxx
+{LDKC,CTG, Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}=
{0x00,0x00,090,Enable,05,05}
[TC]
HP XP Continuous Access Software function
Change CTG Option
Change Consistency Group Option operation
XP24000 Audit Log User and Reference Guide 183