HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

DescriptionItem
The LDKC number of the paired LDKC.LDKC
The path group ID or SSID.ID
When the path group ID is default setting, the output is Default.
The controller ID.Controller ID
The update copy mode set.Type
Sync: Synchronous mode, Async: Asynchronous mode
The initial copy mode set.Initial Copy
Entire: All copy, None: No copy
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at one time).Copy Pace
The priority of the set initial copy operation (scheduling order).Priority
The unit of the differential management set.Diff
Auto, Cylinder, Track
The consistency group number of the consistency group (CT group) that the created
pair belongs to. This value is output when the asynchronous pair is created only.
CTG
The error level set (handling in case of trouble).Error Level
This value is output when the asynchronous pair is created only.
Group: Group (suspended by consistency group),
LU: LU (appropriate LU only is suspended)
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of created pairs.Num. of Pairs
HP XP Continuous Access Software - Pairresync Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Pairresync,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Fence Level,Copy Pace,Priority,Range,
Error Level,Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,Never,15,256,Group,Group,Normal End},
{1A-0x00-0x001,Never,15,256,Group,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC]
HP XP Continuous Access Software function
Sample Audit Logs188