HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

HP XP Continuous Access Software - Pairsplit-S Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Pairsplit-S,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Type,Force,Range,Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,P-VOL,No,Group,Normal End},{1A-0x00-0x001,No,Group,
Normal End},
+{1A-0x00-0x002,No,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC]
HP XP Continuous Access Software function
Pairsplit-S
Pairsplit-S operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 182 Detailed Info: Pairsplit-S Operation
DescriptionItem
The port number, host group number and LUN of the primary volume in the
deleted pair sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the
deleted pair sequentially.
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary site.Type
P-VOL: Primary volume, S-VOL: Secondary volume
The setting content of forced pair deletion.Force
Yes: Pair is deleted even when MCU cannot communicate with RCU
No: Pair is deleted when MCU can change the pair status to SMPL only
The delete range set. This value is output when the asynchronous pair is deleted
only.
Range
Group: Group (all asynchronous pairs in the consistency group),
CT: C/T (asynchronous pairs which the consistency status of the consistency
group is group and the pair status is PSUE)
LU: LU (specified asynchronous pairs only)
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
XP24000 Audit Log User and Reference Guide 191