HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Detailed information displays for this operation, as shown in the following table.
Table 184 Detailed Info: Add Pair Operation
DescriptionItem
The LDKC, CU and LDEV number of the volume specified to the main volume when the
pair is created.
M-VOL(LDKC:CU:LDEV)
The LDEV number of the volume specified to the remote volume when the pair is created.R-VOL(LDEV)
The serial number of the device.S/N
The LDKC number of the paired LDKC.LDKC
Indicates SSID.SSID
The controller ID.Controller ID
The update copy mode set; Sync: Synchronous mode, Async: Asynchronous modeType
The initial copy mode set.; Entire: All copy, None: No copyInitial Copy
The fence level set (the condition that MCU rejects the write operation to the main
volume.)
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of the initial copy operation set (scheduling order).Priority
The unit of the differential management set: Auto, Cylinder, TrackDiff
Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not. Only M-VOL: Copy to main volume only is enabled
CFW
Copy To R-VOL: Copy to main and remote volume is enabled
Indicates whether DFW use to the remote volume is set or not. This value is output
when the synchronous pair is created only. When the asynchronous pair is created,
a hyphen (-) is output.
DFW
Not required: DFW not required, Required: DFW required
The consistency group number of the consistency group (CT group) that the created
pair belongs to. This value is output when the asynchronous pair is created only.
CTG
The error level set (handling in case of trouble). This value is output when the
asynchronous pair is created only.
Error Level
Volume: Volume (suspended by appropriate pair); Group: Group (suspended by
consistency group)
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of created pairs.Num. of Pairs
Sample Audit Logs194