HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

DescriptionItem
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI
Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output
when the PCB of the open system is not installed, or MP reboot is not executed.
Open Port Mode
The reboot group (By1/2, By1/4, or By One). However, it is not output when
microprogram is changed offline, or MP reboot is not executed.
Reboot Grp.
The kind of microprogram.Micro Kind
The old version number of the microprogram.Old Ver
The new version number of the microprogram.New Ver
The number of the kind of microprogram.Num.of Kind
Install - MP Install Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],MP Install,,Normal end,,,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG},
Num. of Kind=7
+Target MP={CHP00-1E,CHP01-1E,DKP80-1A},Num. of MP=3
[Install]
Install function
MP Install
MP Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 62 Detailed Info: MP Install Operation
DescriptionItem
The kind of microprogram installed.Micro Program
The number of the kind of the installed microprogram.Num. of Kind
The mounting location of the installed microprogram.Target MP
The number of microprogram installed.Num. of MP
Sample Audit Logs90