HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

DescriptionItem
Indicates whether the command device setting is enabled or disabled.CommandDev
Disable or Enable is output.
The number of logical volumes where the command device is set.Num. of LDEVs
Install - Set Command Device Security (CommandDevSec)
Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set CommandDevSec,,Normal end,,,
Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
[Install]
Install function
Set CommandDevSec
Set CommandDevSec operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 72 Detailed Info: Set Command Device Security (CommandDevSec) Operation
DescriptionItem
The LDKC, CU and LDEV numbers of the logical volume where the command device is
set.
LDKC:CU:LDEV
Indicates whether the command device security setting is enabled or disabled.CommandDev
Disable or Enable is output.
The number of logical volumes where the command device is set.Num. of LDEVs
Install - Set Fibre Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Fibre Address,,Normal end,,,
Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2
[Install]
Sample Audit Logs98