HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96317, June 2009)

15 - 18
5502 Service Warning E-mail notification could not
be initialized. Check to make
sure Internet Explorer 5.0 or
later is installed.
E-mail notification requires
Internet Explorer 5.0 or
later. Verify that you have
this version or later installed
on the Storage Mirroring
server.
5503 Service Warning E-mail notification could not
be processed. Check to make
sure the correct version of
SMTPMail.DLL is registered
on the system (error code:
%1).
If you are using Storage
Mirroring 4.4.2.1 or earlier
and Windows NT 4.0, e-mail
notification requires
Windows Management
Instrumentation (WMI) to be
installed. Verify that you
have it installed on the
Storage Mirroring server.
5504 Service Warning Could not load LocalRS.dll
(for e-mail notification).
This alert occurs if there is an
error loading the resource
DLL for the daemon.
Typically, this is caused by a
missing LocalRS.dll file.
Reinstall the software, using
the installation Repair
option, to install a new copy
of the LocalRS.dll. Contact
technical support if this error
persists.
5505 Service Warning E-mail could not be sent.
Check e-mail settings (error
code: %1).
Verify that the e-mail server
that you have identified in
your e-mail notification
configuration is correct.
5506 Service Warning One or more required e-mail
settings have not been
specified (error code: %1).
At a minimum, you must
specify the e-mail server, the
From and To addresses, and
at least one type of event to
include.
5507 Service Warning E-mail notification could not
be initialized. Check to make
sure WMI is installed and
available (error code: %1).
If you are using Storage
Mirroring 4.4.2.1 or earlier
and Windows NT 4.0, e-mail
notification requires
Windows Management
Instrumentation (WMI) to be
installed. Verify that you
have it installed on the
Storage Mirroring server.
5508 Service Warning An error occurred connecting
to the WMI namespace.
Check to make sure the
Windows Management
Instrumentation service is
not disabled (error code
%1).
This alert occurs if there is an
error with the Windows
Management
Instrumentation (WMI)
service. Verify that you have
it installed on the Storage
Mirroring server and that it is
enabled.
5600 Service Warning Part or all of the e-mail
setting %1 is not in a valid
format.
Verify that the include
categories and exclude ID list
are identified and formatted
correctly.
ID Category Severity Event Message Required Response