HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96317, June 2009)

15 - 4
Log messages
The following table describes some of the standard Storage Mirroring alerts that may be displayed in
the log files. The ID appears in column 7 of the log file, and the message appears in column 8.
NOTE: In the following table, con_id refers to the unique connection ID assigned to each
connection between a source replication set and a target.
ID Message Description
0 N/A There are several log messages with this ID
number. See the description in the Message
column.
7
 Synchronous ioctl returned
STATUS_
PENDING
 Failed to reset Replication
Flags. Replication may not be
performed correctly.
 Communication with the Storage Mirroring
driver is not being performed correctly. A
reboot is required to guarantee replication and
data integrity.
 An error occurred between the Storage
Mirroring driver and recent changes to the
replication set. The possible resolutions are:
 Undo the changes to the replication set
 Stop and restart Storage Mirroring
 Reboot the server
69 Storage Mirroring kernel started
on server_name
The Storage Mirroring daemon was started on the
Storage Mirroring server specified.
70 Storage Mirroring kernel stopped The Storage Mirroring daemon was stopped on a
Storage Mirroring server.
71 Originator attempting
ip://xxx.xxx.xxx.xxx
A source is requesting to connect a replication set
to a target machine.
72 Connection request from
ip://xxx.xxx.xxx.xxx
A target machine has received a source machine’s
request to connect a replication set to the target.
73 Connected to
ip://xxx.xxx.xxx.xxx
A source machine has successfully connected a
replication set to a target machine.
74 Connection paused with
ip://xxx.xxx.xxx.xxx
A network connection between the source and the
target exists and is available for data transmission,
but data is being held in queue and is not being
transmitted to the target. This happens because the
target machine cannot write data to disk fast
enough. Storage Mirroring will resolve this issue on
its own by transmitting the data in queue when the
target catches up.
75 Connection resumed with
ip://xxx.xxx.xxx.xxx
The transmission of data from the source machine
to the target machine has resumed.
76 Connection failed to
ip://xxx.xxx.xxx.xxx
An attempt to establish a network connection
between a source machine and target machine has
failed. Check your network connections and verify
that the target machine is still online.
77 Connection lost with IP address
address
The network connection previously established
between a source machine and target machine has
been lost. Check your network connections and
troubleshoot to see why the connection was lost.