HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96317, June 2009)

15 - 5
78 Auto-disconnect threshold has
been reached.
The Storage Mirroring queue has exceeded its limit,
and the auto-disconnect process will disconnect the
source and target connection. The auto-reconnect
process will automatically reestablish the
connection if the auto-reconnect feature is enabled.
If the auto-reconnect feature is not enabled, you
must first verify that the connection between the
source and target has been broken, and then
manually reestablish the connection in the
Management Console.
79 Memory freed to bring Storage
Mirroring memory usage below
the limit
Data in the source queue has been sent to the
target machine, bringing the pagefile below its limit.
80 Trying to auto-retransmit to
ip://xxx.xxx.xxx.xxx
Storage Mirroring is attempting to automatically
reconnect previously established source and target
connections after a server reboot or
auto-disconnect. This is also referred to as the
auto-reconnect process.
81 Schedule transmit start to target A scheduled transmission of data from a source
machine to a target machine has started. See the
description in the Message column.
82 Schedule transmit end to target A scheduled transmission of data from a source
machine to a target machine has ended. See the
description in the Message column.
85 repset has been
auto-disconnected
Storage Mirroring automatically disconnects the
source and target connection because the queue
size has reached a specified size for this action.
87 Start replication on connection
con_id
Data has started replicating from a source machine
to a target machine.
88 Stop replication on connection
con_id
Data has stopped replicating from a source machine
to a target machine.
89
Mirror started con_id
Data is being mirrored from a source machine to a
target machine.
90 Mirror stopped con_id The process of mirroring data from a source
machine to a target machine has stopped due to
user intervention or an auto-disconnect. (This
means the mirroring process was not completed.)
91 Mirror paused con_id The process of mirroring data from a source
machine to a target machine has paused because
the target machine cannot write the data to disk
fast enough. Storage Mirroring will resolve this
issue on its own by transmitting the data in queue
when the target catches up.
92 Mirror resumed con_id The process of mirroring data from a source
machine to a target machine has resumed.
93 Mirror ended con_id The process of mirroring data from a source
machine to a target machine has ended.
94 Verification started con_id The verification process of confirming that the
Storage Mirroring data on the target is identical to
the data on the source has started.
95 Verification ended con_id The verification process of confirming that the
Storage Mirroring data on the target is identical to
the data on the source has ended.
ID Message Description