Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

B-6 Secure Fabric OS Administrator’s Guide
Publication Number: 53-1000244-01
B
Command Restrictions in Secure Mode
This section provides information about the restrictions that secure mode places on commands. Any
commands not listed here can be executed on any switch, whether or not secure mode is enabled.
Zoning Commands
All zoning commands must be executed on the primary FCS switch, except for the cfgShow command,
which can also be executed on the backup FCS switch. Table B-2 lists the zoning commands, for more
details about the commands listed in Table B-2 see the Fabric OS Command Reference.
Table B-2 Zoning Commands
Command Primary FCS
Switch
Backup FCS
Switch
Non-FCS
Switch
aliAdd Yes No No
aliCreate Yes No No
aliDelete Yes No No
aliRemove Yes No No
aliShow Yes Yes No
cfgAdd Yes No No
cfgActvShow Yes Yes No
cfgClear Yes No No
cfgCreate Yes No No
cfgDelete Yes No No
cfgDisable Yes No No
cfgEnable Yes No No
cfgRemove Yes No No
cfgSave Yes No No
cfgShow Yes Yes No
cfgSize Yes Yes Yes
cfgTransAbort Yes No No
cfgTransShow Yes Yes No
defzone Yes No No
faZoneAdd Yes No No
faZoneCreate Yes No No
faZoneDelete Yes No No
faZoneRemove Yes No No