Brocade Access Gateway Administrator's Guide - Supporting Fabric OS v5.2.1 (53-1000430-01)

D-2 Access Gateway Administrator’s Guide

Publication Number: 53-1000430-01

Access Gateway commands

Enables and manages Access Gateway mode to perform AG specific operations.

Synopsis ag --show

ag --modeshow

ag --modeenable

ag --modedisable

ag --mapshow [N_Port]

ag --mapset <N_Port> <F_Ports>

ag --mapadd <N_Port> <F_Ports>

ag --mapdel <N_Port> <F_Ports>

ag --failovershow [N_Port]

ag --failoverdisable <N_Port>

ag --failoverenable <N_Port>

ag --failbackshow [N_Port]

ag --failbackdisable <N_Port>

ag --failbackenable <N_Port>

Description Use this command to enable and disable Access Gateway mode, to display the current configuration and

state, to configure and display the F_Port to N_Port mapping, and to configure N_Port failover and

failback policies. AG only supports embedded switch platforms that use the Goldneye ASIC.

Operands This command has the following operands:

--show Displays the N_Ports and F_Ports that are currently online, whether

they have failover enabled, and displays their mapping.

--modeshow Displays current mode of the switch, either an Access Gateway

mode or a native Fibre channel switch (FOS) mode.

--modeenable Enables Access Gateway mode for a switch.

--modedisable Disables Access Gateway mode for a switch.

--mapshow [N_Port] Displays the F_Ports that are mapped to a given N_Port. Current

F_Ports are the lists of F_Ports online through the specified N_Port.

N_Port is optional and if used, it displays the F_Ports that are

mapped to the specified N_Port only.

--mapset <N_Port F_Ports> Maps F_Ports to a specific N_Port to the fabric. Any F_Port can be

mapped to only one N_Port. F_Ports are enabled only if the N_Port

is online and NPIV is enabled on the fabric port that is connected to

Access Gateway.