Brocade Access Gateway Administrator's Guide - Supporting Fabric OS v5.2.1 (53-1000430-01)

Access Gateway Administrator’s Guide D-3

Publication Number: 53-1000430-01

--mapadd <N_Port> <F_Ports> Adds F_Ports to existing N_Port. The traffic for the configured

F_Ports to be routed to the fabric through the specified N_Port

when the F_Port comes online. An F_Port can be mapped to only

one N_Port. Specify the N_Port number to which the F_Ports are to

be mapped. This command overwrites the existing mapping for the

N_Port. Specify the list of F_Port numbers to add to the existing

specified F_Port to N_Port mapping. The F_Port numbers must be

separated my semicolons.

--mapdel <N_Port> <F_Ports> Removes the specified F_Ports from the N_Port mapping. Specify

the N_Port number to which the F_Ports are currently mapped.

Specify the list of F_Port numbers to remove from the specified

F_Ports to N_Port mapping. The F_Port numbers must be separated

by semicolons.

--failovershow [N_Port] Displays the failover policy for the N_Port. Use this command with

the N_Port parameter to see if the failover for this N_Port is

enabled or not. If an N_Port failure occurs when the failover policy

is enabled, all F_Ports mapped to the failed N_Port will failover to

another N_Port connected to the same fabric, and then those

F_Ports are re-enabled.

--failoverdisable <N_Port> Disables the failover policy for an N_Port.

--failoverenable <N_Port> Enables the failover policy for an N_Port. When the failover policy

is enabled for an N_Port and failure occurs on that port, all F_Ports

mapped to the failed N_Port will failover to another N_Port

connected to the same fabric, and then those F_Ports are re-

enabled.

--failbackshow [N_Port] Displays the failover policy for the N_Port (s).

--failbackdisable <N_Port> Disables the failback policy for an N_Port.

--failbackenable <N_Port> Enables the failback policy for an N_Port.