Brocade Access Gateway Administrator's Guide - Supporting Fabric OS v5.2.1 (53-1000430-01)

D-8 Access Gateway Administrator’s Guide
Publication Number: 53-1000430-01
AG-1010
D
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WA RN I NG
AG-1010
Message
Probable
Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Verify the configuration of the fabric switch..
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WA RN I NG
AG-1011
Message
Probable
Cause
Indicates that the discover F_Port service parameters (FDISC) request sent to the fabric switch from the
Access Gateway failed.
Recommended
Action
Verify the configuration of the fabric switch..
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WA RN I NG
AG-1012
Message
Probable
Cause
Indicates that the N_Port logout request sent to the fabric switch from the Access Gateway failed.
<timestamp>, [AG-1010], <sequence-number>,, WARNING, <system-name>,
PLOGI sent from N-Port <port> failed
<timestamp>, [AG-1011], <sequence-number>,, WARNING, <system-name>,
FDISC sent from N-Port <port> failed
<timestamp>, [AG-1012], <sequence-number>,, WARNING, <system-name>,
FDISC sent from N-Port <port> failed