Brocade Access Gateway Administrator's Guide - Supporting Fabric OS v5.2.1 (53-1000430-01)

Access Gateway Administrator’s Guide D-9
Publication Number: 53-1000430-01
AG-1013
D
Recommended
Action
Verify the configuration of the fabric switch..
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WA RN I NG
AG-1013
Message
Probable
Cause
Indicates that the F_Ports were failed over to another N_Port(s) that is connected to the same fabric.
Recommended
Action
Run the ag --mapshow command to display the updated F-Port to N-Port mapping.
Severity INFO
AG-1014
Message
Probable
Cause
Indicates that the N_Port is back online and the F_Ports have been failed back to the N_Ports to which
they were mapped.
Recommended
Action
Run the ag --mapshow command to display the updated F-Port to N-Port mapping.
Severity INFO
<timestamp>, [AG-1013], <sequence-number>,, INFO, <system-name>,
Failing over all F_Ports mapped to N_Port <port> to other N_Port(s)
<timestamp>, [AG-1014], <sequence-number>,, INFO, <system-name>,
Failing back F_Ports to mapped to N_Port <port>