Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

106 Fabric OS Command Reference Manual
53-1000436-01
configure
2
Application Attributes
Application HTTP, SNMP, and RPCd attributes are configurable; by default, all three attributes are
enabled. Refer to the table for the application attributes that can be changed.
The secure protocols must not be enabled before setting SSL attributes correctly.
Operands none
Examples To modify configuration settings on a switch:
switch:admin> configure
configure
System services (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no]
snmp attributes (yes, y, no, n): [no] y
Select SNMP Security Level:
(0 = No security, 1 = Authentication only, 2 = Authentication and Privacy):
(0..2) [0]
:See Also agtCfgDefault, agtCfgSet, agtCfgShow, configDefault, configShow, ipAddrSet,
portCfgLongDistance, switchDisable, switchEnable, upTime
TABLE 8 Configurable Application Attributes
Application File Type Default Range
ssl Certificate File string not set varies
CA Certificate File string not set varies
Length of crypto key number 128 40, 56, 128
http HTTP Enabled boolean Yes Yes/No
Secure HTTP Enabled boolean Off On/Off
snmp SNMP Security Level number 0 0, 1, 2
rpcd RPCd Enabled boolean On On/Off
Secure RPCd Callback boolean Off On/Off
cfgload Secure Config Upload and Download boolean Off On/Off