Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 139

53-1000436-01

dlsReset

Disables the dynamic load sharing (DLS) option.

Synopsis dlsreset

Description Use this command to turn off DLS when a fabric change occurs. Refer to dlsSet for a full

description of load sharing.

This command should be used only if devices connected to the fabric cannot handle occasional

routing changes correctly.

DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing

policies.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To disable the dynamic load sharing option:

switch:admin> dlsreset

Committing configuration...done.

switch:admin> dlsshow

DLS is not set