Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

152 Fabric OS Command Reference Manual
53-1000436-01
fabPortShow
2
fabPortShow
Displays fabric port information.
Synopsis fabportshow [slotnumber/]portnumber
Description Use this command to display the state of a port, relative to the fabric, as well as a list of pending
commands. The following information displays:
Port The port number.
State The state of the port:
P0 Port Offline
P1 Port Online
P2 ELP ACC Received
P3 Link Reset Done
I0 Trunk Initiator: EMT Sent
I1 Trunk Initiator: ETP ACC Received
I2 Trunk Initiator: ETP Sent
I3 Trunk Initiator: Link Reset
T0 Trunk Target: EMT Received
T1 Trunk Target: ETP Received
T2 Trunk Target: Link Reset
LD Dynamic long distance: ECP sent or received
T3 Trunk Target: Link reset done on slave
I4 Trunk Initiator: Link reset done on slave
List The IU list pointer for this port.
Flags Port flags:
0x00000001 Slave connection
0x00000002 Loopback connection
0x00000004 Incompatible connection
0x00000008 Overlapping domains
0x00000010 Overlapping zones
0x00000020 Done PTIO ioctl
0x00000040 Sent an RJT to ELP
0x00000080 BF received from the port
0x00000100 Port truly connected to E_Port
0x00000200 Segmented by routing code
0x00000400 fspf has completed routing