Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 171
53-1000436-01
fastboot
2
fastboot
Reboots the Control Processor (CP), bypassing Power-On Self-Tests (POST).
Synopsis fastboot
Description Use this command to immediately reboot the CP. This command is similar to reboot, but skips
POST when the system comes back up, reducing boot time significantly.
If POST was previously disabled using the diagDisablePost command, then fastboot is the same as
reboot.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To reboot the Control Processor, without executing POST on startup:
switch:admin> fastboot
See Also diagDisablePost, diagEnablePost, reboot