Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

230 Fabric OS Command Reference Manual
53-1000436-01
ficonShow
2
NL is NL_Port.
Protocol Displays whether the traffic is using FICON or FCP.
Registered Node WWN
Displays the device's node World Wide Name associated with the device HBA.
Registered Port WWN
Displays the device's channel or storage CU port World Wide Name
associated with the device HBA.
Sequence Number Displays the sequence number of the self describing node.
Serial Number Displays the switch serial number.
Switch node WWN Displays the switch node World Wide Name.
Switch Port WWN Displays the switch port World Wide Name.
Switch WWN Displays the switch WWN.
Tag Displays the physical identifier for the self-describing node interface.
TS Format Displays the Time Server format.
Time Stamp Displays the timestamp, expressed in date format.
Type Same as Port Type.
Type Number Displays the type number of the self describing node. It also describes the
machine type.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
database
Specify the database to display. Valid values are:
RNID
LIRR
SwitchRNID
RLIR
ILIR
This operand is required.
fabric
Specify fabric to display both local and remote information; if
omitted, only members of the named database that are local to
the switch on which the command is issued displays.
Examples To display the local RNID database:
switch:admin> ficonshow RNID
{
{Fmt Type PID Registered Port WWN Registered Node WWN flag Parm
0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca 0x10
0x200110
Type number: 002064
Model number: 101
Manufacturer: IBM
Plant of Manufacture: 02