Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 293

53-1000436-01

ifModeSet

serial console port.

Are you sure you really want to do this? (yes, y, no, n): [no] y

Proceed with caution.

Auto-negotiate (yes, y, no, n): [no] y

Advertise 100 Mbps / Full Duplex (yes, y, no, n): [yes] y

Advertise 100 Mbps / Half Duplex (yes, y, no, n): [yes] y

Advertise 10 Mbps / Full Duplex (yes, y, no, n): [yes] y

Advertise 10 Mbps / Half Duplex (yes, y, no, n): [yes] y

Committing configuration...done.

To force the link for the eth0 interface from auto-negotiation to 10 Mbit/sec half-duplex operation,

when entering this command through the serial console port:

switch:admin> ifmodeset eth0

Auto-negotiate (yes, y, no, n): [yes] n

Force 100 Mbps / Full Duplex (yes, y, no, n): [no] n

Force 100 Mbps / Half Duplex (yes, y, no, n): [no] n

Force 10 Mbps / Full Duplex (yes, y, no, n): [no] n

Force 10 Mbps / Half Duplex (yes, y, no, n): [no] y

Committing configuration...done.