Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 319

53-1000436-01

iscsiChipTest

Performs functional test of components in iSCSI complex.

Synopsis iscsichiptest --slot slotnumber -testtype type -unit gbeports

Description Use this command to verify the memory of the network processor and iFlipper FPGA.

Operands This command has the following operands:

--slot slotnumber Specifies the slot number that the diagnostic will operate on. The default is

set to 0 and designed to operate on fixed-port-count products.

-testtype type Selects the test type to run. By default, the command runs all tests. Valid

values are:

0 All of the following tests.

1 BCM 1125H SRAM test.

2 iFlipper internal register test.

-unit gbeports Specifies the GE port to test. By default, all the GE ports in the specified slot

slotnumber will be used. This number will be between 0 and 7. 8 will mean all

ports.

Examples To run iscsichiptest:

switch:admin> iscsichiptest --slot 7 -unit 1 -testtype 0

Running iscsichiptest ..............

Test Complete: iscsichiptest Pass 1 of 1

Duration 0 hr, 3 min & 12 sec (0:3:12:511).

passed.