Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

506 Fabric OS Command Reference Manual
53-1000436-01
portLogShow
2
1Online
2Offline
3Testing
4Faulty
5 E_Port
6 F_Port
7Segmented
pstate
AC Active State
LR1Link Reset: LR Transmit State
LR2Link Reset: LR Receive State
LR3 Link Reset: LRR Receive State
LF1 Link Failure: NOS Transmit State
LF2 Link Failure: NOS Receive State
OL1Offline: OLS Transmit State
OL2Offline: OLS Receive State
OL3Offline: Wait for OLS State
LIP reason 8001Retry loop init
8002Start loop after gaining sync
8003Restart loop after port reset
8004LIP when a loop hangs
8005Restart loop if LIP received when sending out ARB(F0)
8006LIP when an OPN returns
8007Restart loop when LIPs received in OLD_PORT AC state
8008Restart loop if loop not empty but E_Port loopback
8009LIP as requested by the LINIT ELS received
800aLIP as requested by the LPC ELS received
800bRestart loop for QuickLoop looplet setup
800cRestart loop for QuickLoop looplet re-initialization
Speed Negotiation States
INIT Start negotiation
NM Negotiate master
WS Wait for signal
NF Negotiation follow
NC Negotiation complete