Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 545
53-1000436-01
portZoneShow
2
portZoneShow
Displays the enforced zone type of the F/FL-ports of a switch.
Synopsis portzoneshow
Description Use this command to display the enforced zone type of the F/FL-ports of a switch.
Output shows virtual port number (decimal), physical port number (decimal), online status (and if
online, port type). If the current zone configuration has been diabled by cfgDisable, the fabric is in
nonzoning mode, in which all devices see each other. When default zoning is enabled with "No
Access" mode, "No Effective configuration: (No Access)" is displayed.
This command requires a Brocade Advanced Zoning license.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the zone membership information of ports:
switch:user> portzoneshow
[OUTPUT TRUNCATED]
PORT: 160 (160) Offline
PORT: 161 (161) Offline
PORT: 162 (162) Offline
PORT: 163 (163) Offline
PORT: 164 (164) Offline
PORT: 165 (165) Offline
PORT: 166 (166) Offline
PORT: 167 (167) Offline
PORT: 168 (168) FL-Port Enforcement: HARD WWN defaultHard: 0 IFID:
0x4332000a
PORT: 169 (169) Offline
PORT: 170 (170) Offline
PORT: 171 (171) Offline
PORT: 172 (172) Offline
PORT: 173 (173) Offline
PORT: 174 (174) Offline
PORT: 175 (175) Offline
PORT: 176 (176) F-Port Enforcement: HARD WWN defaultHard: 0 IFID:
0x4342002a
PORT: 177 (177) Offline
PORT: 178 (178) Offline
PORT: 179 (179) Offline
PORT: 180 (180) Offline
[OUTPUT TRUNCATED]
See Also cfgShow, switchShow