Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 751
53-1000436-01
Commands Exclusive to the Primary FCS
4
tsClockServer Can be run on all switches to view the NTP server's IP address. You can only modify
the NTP server's IP address on the primary FCS switch.
wwn This command can be run on all switches to view the WWN. With security enabled the
WWN of a switch cannot be modified.
zoneAdd Must be run from the primary FCS switch.
zoneCreate Must be run from the primary FCS switch.
zoneDelete Must be run from the primary FCS switch.
zoneObjectCopy Must be run from the primary FCS switch.
zoneObjectExpunge Must be run from the primary FCS switch.
zoneObjectRename Must be run from the primary FCS switch.
zoneRemove Must be run from the primary FCS switch.
TABLE 1 Commands Exclusive to the Primary FCS (Continued)
Command Notes