Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 753
53-1000436-01
Chapter
5
Control Processor Commands
This chapter lists the commands available when logged in to the standby CP in a Brocade 24000 or
48000 director. The full set of commands for your user role are available to the active CP.
Commands Supported on the Standby CP
The following commands are supported when logged into the standby CP.
TABLE 1 Commands Supported on the Standby CP
Command Description
date Displays or sets the system date and time.
diagShow Displays current values of debug and verbosity levels of the specified
module.
errClear Clears error log.
errDump Displays error log (no page breaks).
errModuleShow Displays all the defined error log modules.
errShow Displays error log.
fastboot Reboots this switch, bypassing POST.
firmwareCommit Commits firmware to nonvolatile memory.
firmwareDownload Downloads firmware onto switch.
firmwareDownloadStatus Displays the progress and status of a firmware download.
firmwareRestore Restores the old firmware in the switch.
firmwareShow Displays firmware versions in the switch.
h Displays shell history.
haDump Dumps High Availability debug data.
haShow Displays High Availability status.
help Displays this list.
ifModeSet Sets the link operating mode for a network interface.
ifModeShow Displays the link operating mode for a network interface.
killTelnet Terminates telnet/serial login sessions interactively.
login Logs in as new user.
logout Logs out from a telnet, rlogin, or serial port session.
memShow Displays memory usage in the system.