Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StorageWorks 4/256 SAN Director FICON CUP With Advanced Security OS

Publication Number: 53-1000241-01

Publication Date: 9/29/06

Fabric OS

MIB Reference

Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x,

v5.0.x, v5.1.x, 5.2.x

Summary of content (292 pages)

PAGE 1
Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, 5.2.
PAGE 2
Copyright © 2006, Brocade Communications Systems, Incorporated. ALL RIGHTS RESERVED. Brocade, the Brocade B weave logo, Fabric OS, File Lifecycle Manager, MyView, Secure Fabric OS, SilkWorm, and StorageX are registered trademarks and Tapestry is a trademark of Brocade Communications Systems, Inc., in the United States and/or in other countries. FICON is a registered trademarks of IBM Corporation in the U.S. and other countries.
PAGE 3
Document History The following table lists all versions of the Fabric OS MIB Reference. Document Title Publication Number Summary of Changes Publication Date Brocade MIB Reference Manual v2.3 53-0000069-02 December 2000 Brocade MIB Reference Manual v3.0 53-0000134-03 July 2001 Brocade MIB Reference Manual v3.0, 4.0 53-0000184-02 March 2002 Brocade MIB Reference Manual (v4.1, v4.0.x, v3.1, v3.0.x, v2.6.x) 53-0000521-02 Added Brocadespecific Entity and HA-MIBs.
PAGE 4
PAGE 5
Contents About This Document Chapter 1 Chapter 2 How This Document Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Supported Hardware and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii What’s New in This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Additional Information . . . . . . .
PAGE 6
IP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 ICMP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 TCP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 UDP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 EGP Group . . . . . . . . . . . . . . . .
PAGE 7
Entity Mapping Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 General Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Entity MIB Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Entity MIB Conformance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Chapter 5 SW-MIB Objects SW MIB Overview . . . . . . . . . . . . . .
PAGE 8
Chapter 7 FICON MIB Objects FICON MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 SNMP Traps for FICON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 FICON MIB System Organization of MIB Objects . . . . . . . . . . . . . . . . . 7-2 Textual Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 ficonRNID Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
Appendix B MIB OIDs and Their Matching Object Names MIB OIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 10
x Fabric OS MIB Reference Publication Number: 53-1000241-01
PAGE 11
About This Document This reference document is for SNMP administrators who need to configure and administer the SNMP interface to manage a fabric.
PAGE 12
Supported Hardware and Software This document supports Brocade Fabric OS versions Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.0, 5.0.x, v5.1.x, v 5.2.
PAGE 13
Document Conventions This section describes text formatting conventions and important notices formats.
PAGE 14
Additional Information This section lists additional Brocade and industry-specific documentation that you might find helpful. Brocade Resources The following related documentation is provided on the Brocade Documentation CD-ROM and on the Brocade Web site, through Brocade Connect. Note Go to http://www.brocade.com and click Brocade Connect to register at no cost for a user ID and password.
PAGE 15
Extended Fabrics Supports the reliable, high-speed connectivity of SilkWorm switches over dark fiber or Dense Wave Division Multiplexing (DWDM) equipment at distances up to 500 km to enhance business continuance operations. Fabric Watch Continuously monitors SAN fabrics for potential faults based on thresholds set for a variety of SAN fabric elements and events—automatically alerting administrators to potential problems before they become costly failures.
PAGE 16
Getting Technical Help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To expedite your call, have the following information available: 1. General Information • • • • • • • • • 2.
PAGE 17
Document Feedback Because quality is our first concern at Brocade, we have made every effort to ensure the accuracy and completeness of this document. However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: documentation@brocade.com Provide the title and version number and as much detail as possible about your comment, including the topic heading and page number and your suggestions for improvement.
PAGE 18
xviii Fabric OS MIB Reference Publication Number: 53-1000241-01
PAGE 19
Chapter Understanding Brocade SNMP 1 The Simple Network Management Protocol (SNMP) is an industry-standard method of monitoring and managing network devices. This protocol promotes interoperability, because SNMP-capable systems must adhere to a common set of framework and language rules. Understanding the components of SNMP makes it possible to use third-party tools to view, browse, and manipulate Brocade switch variables (MIBs) remotely as well as to set up an enterprise-level management process.
PAGE 20
1 Understanding SNMP Basics get, getnext, set Management Station Agent reply Figure 1-2 SNMP Query The management station can also receive traps, unsolicited messages from the switch agent if an unusual event occurs. See “Understanding SNMP Traps” on page 1-4 for more information. Management Station Figure 1-3 TRAP Agent SNMP Trap The agent can receive queries from one or more management stations and can send traps to up to six management stations.
PAGE 21
Understanding SNMP Basics 1 iso (1) org (3) Brocade SW MIB 1.3.6.1.4.1.1588 dod (6) internet (1) directory (1) system (1) sysDescr (1) Figure 1-4 mgmt (2) experimental (3) private (4) mib-2 (1) fibreChannel (42) enterprise (1) fcFe (1) bcsi (1588) interface (2) sysObjectID (2) fcFabric (2) Brocade MIB Tree Location Use a MIB browser to access the MIB variables: all MIB browsers perform queries and load MIBs.
PAGE 22
1 Understanding SNMP Basics Understanding SNMP Traps An unsolicited message that comes to the management station from the SNMP agent on the device is called a trap. Brocade switches send traps out on UDP port 162 only, therefore an SNMP management application must be running on UDP port 162. In order to receive traps, the management station IP address and severity level must be configured on the switch. Up to six trap recipients can be configured using Web Tools or the snmpConfig command.
PAGE 23
Loading Brocade MIBs • 1 fruHistoryTrap This trap is generated when a FRU is added or removed. The high availability trap (HA-TRAP) can be configured to send traps using the snmpConfig command. See the Fabric OS Command Reference for more information on this command. SW Traps There are six specific traps defined in Brocade SW-TRAP: 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4.
PAGE 24
1 Loading Brocade MIBs Brocade MIB Files The Brocade MIB files are as follows: • • • • • • • • • BRCD_v5_0.mib SW_v5_5.mib FA_v3_0.mib FE_RFC2837.mib ENTITY_RFC2737.mib HA_v5_1.mib FICON_v5_0.mib CPQ_HOST.mib CPQ_RACK.mib Before Loading MIBs Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (see Table 1-5). Table 1-5 Fabric OS Supported SNMP Versions Firmware SNMPv1 SNMPv2 SNMPv3 Fabric OS v2.6.2 and previous Yes No1 No Fabric OS v3.
PAGE 25
Loading Brocade MIBs 1 MIB Loading Order Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade MIBs, see Figure 1-6 to ensure any MIB dependencies are loading in the correct order. Select one or both Select one FA_v2_2.mib FCMGMT-MIB FOS 2.6.x RFC1213-MIB MIB-II FE_EXP.mib FCFABRIC-ELEMENT-MIB FOS v2.6.x, v3.0.x FA_v3_0.mib FCMGMT-MIB FOS 3.x, 4.x, 5.x FE_RFC2837.mib FIBRE-CHANNEL-FE-MIB FOS 3.1.
PAGE 26
1 SilkWorm 7500 / FR4-18i and Brocade MIBs SilkWorm 7500 / FR4-18i and Brocade MIBs EX_Ports, VEX_Ports, or VE_Ports display as “other” through SNMP. There are no statistics available from VE_Ports. Information about the GbE port type is not supported. The changes in the sensor details for FR4-18i Blade has been incorporated into SNMP. The “connUnitSensorTable 1.3.6.1.3.94.1.8” on page 8-16 and “swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 27
Fabric OS Commands for Configuring SNMP Table 1-7 1 Commands for Configuring SNMP (Continued) Command Description snmpMibCapShow Displays the settings in the snmpMibCapSet command. agtcfgDefault Resets the traps to the default values. This command is retained for legacy reasons but is replaced functionally by the snmpConfig command. agtcfgSet Used to set the trap values for SNMP. This command is retained for legacy reasons but is replaced functionally by the snmpMibCapSet command.
PAGE 28
1 1-10 Fabric OS Commands for Configuring SNMP Fabric OS MIB Reference Publication Number: 53-1000241-01
PAGE 29
Chapter MIB-II (RFC1213-MIB) 2 This chapter provides descriptions and other information specific to MIB-II, and includes the following sections: • • • • • • • • • • • “MIB II Overview” next “System Group” on page 2-9 “Interfaces Group” on page 2-11 “AT Group” on page 2-15 “IP Group” on page 2-16 “ICMP Group” on page 2-23 “TCP Group” on page 2-26 “UDP Group” on page 2-30 “EGP Group” on page 2-31 “Transmission Group” on page 2-31 “SNMP Group” on page 2-32 MIB II Overview The descriptions of each of the
PAGE 30
2 MIB-II Object Hierarchy MIB-II Object Hierarchy Figure 2-1 through Figure 2-10 depicts the organization and structure of MIB-II. - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp Figure 2-1 MIB-II Overall Hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.
PAGE 31
MIB-II Object Hierarchy 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress 1.3.6.1.2.1.2.2.1.6 - ifAdminStatus 1.3.6.1.2.1.2.2.1.7 - ifOperStatus 1.3.6.1.2.1.2.2.1.8 - ifLastChange 1.3.6.1.2.1.2.2.1.9 - ifInOctets 1.3.6.1.2.1.2.2.1.10 - ifInUcastPkts 1.3.6.1.2.1.2.2.1.
PAGE 32
2 MIB-II Object Hierarchy - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - ipInDelivers 1.3.6.1.2.1.4.9 - ipOutRequests 1.3.6.1.2.1.4.10 - ipOutDiscards 1.3.6.1.2.1.4.11 - ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.
PAGE 33
MIB-II Object Hierarchy 2 - icmp (1.3.6.1.2.1.5) - icmpInMsgs 1.3.6.1.2.1.5.1 - icmpInErrors 1.3.6.1.2.1.5.2 - icmpInDestUnreachs 1.3.6.1.2.1.5.3 - icmpInTimeExcds 1.3.6.1.2.1.5.4 - icmpInParmProbs 1.3.6.1.2.1.5.5 - icmpInSrcQuenchs 1.3.6.1.2.1.5.6 - icmpInRedirects 1.3.6.1.2.1.5.7 - icmpInEchos 1.3.6.1.2.1.5.8 - icmpInEchoReps 1.3.6.1.2.1.5.9 - icmpInTimestamps 1.3.6.1.2.1.5.10 - icmpInTimestampReps 1.3.6.1.2.1.5.11 - icmpInAddrMasks 1.3.6.1.2.1.5.12 - icmpInAddrMaskReps 1.3.6.1.2.1.5.13 - icmpOutMsgs 1.
PAGE 34
2 MIB-II Object Hierarchy - tcp - (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 - tcpConnEntry 1.3.6.1.2.1.6.13.1 - tcpConnState 1.3.6.1.2.1.6.13.1.
PAGE 35
MIB-II Object Hierarchy 2 - egp - (1.3.6.1.2.1.8) Transmission Group egpInErrors egpOutMsgs egpOutErrors egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode - egpNeighEventTrigger - egpAs Figure 2-9 egp Hierarchy - snmp (1.3.6.1.2.1.11) - snmpInPkts 1.3.6.1.2.1.11.
PAGE 36
2 Textual Conventions Textual Conventions Table 2-1 lists the textual conventions used for MIB-II.
PAGE 37
System Group 2 System Group All systems must implement the System Group. If an agent is not configured to have a value for any of the System Group variables, a string of length 0 is returned. sysDescr 1.3.6.1.2.1.1.1 A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software. Format Set command Default This must contain only printable ASCII characters.
PAGE 38
2 sysLocation 1.3.6.1.2.1.1.6 sysLocation 1.3.6.1.2.1.1.6 The physical location of this node (for example, telephone closet, 3rd floor). Default Set command End User Premise Set this value using the agtCfgSet command. sysServices 1.3.6.1.2.1.1.7 A value that indicates the set of services that this entity primarily offers.The value is a sum. This sum initially takes the value 0.
PAGE 39
Interfaces Group 2 Interfaces Group Implementation of the Interfaces group is mandatory for all systems. ifNumber 1.3.6.1.2.1.2.1 The number of network interfaces present on this system, regardless of their current state. The return value is 5 for the SilkWorm 12000, 24000, and 48000 (single domain), 7 for the SilkWorm 12000 and 24000 (dual-domain). All non-bladed systems will have a value of 3. ifTable 1.3.6.1.2.1.2.2 A list of interface entries. The number of entries is given by the value of ifNumber.
PAGE 40
2 ifMtu 1.3.6.1.2.1.2.2.1.4 Values • • • eth0 maps to 6 (Ethernet-csmacd) lo maps to 24 (softwareLoopback) fc0 maps to 56 ifMtu 1.3.6.1.2.1.2.2.1.4 The size of the largest datagram that can be sent/received on the interface, specified in octets. Values For interfaces that are used to transmit network datagrams, the value is the size of the largest network datagram that can be sent on the interface (these values are different for Fabric OS v4.x).
PAGE 41
ifOperStatus 1.3.6.1.2.1.2.2.1.8 2 ifOperStatus 1.3.6.1.2.1.2.2.1.8 The current operational state of the interface. Note The 3 state (testing) indicates that no operational packets can be passed. ifLastChange 1.3.6.1.2.1.2.2.1.9 The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. ifInOctets 1.3.6.1.2.1.2.2.1.
PAGE 42
2 ifOutOctets 1.3.6.1.2.1.2.2.1.16 ifOutOctets 1.3.6.1.2.1.2.2.1.16 The total number of octets transmitted out of the interface, including framing characters. ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 The total number of packets that were requested, by higher-level protocols, to be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.
PAGE 43
AT Group 2 AT Group Implementation of the Address Translation group is mandatory for all systems. Note, however, that this group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address translation tables. atTable 1.3.6.1.2.1.3.1 The Address Translation group contains one table, which is the union across all interfaces of the translation tables for converting a network address (for example, an IP address) into a subnetworkspecific address.
PAGE 44
2 IP Group IP Group Implementation of the IP group is mandatory for all systems. ipForwarding 1.3.6.1.2.1.4.1 The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams; IP hosts do not (except those source-routed through the host). ipDefaultTTL 1.3.6.1.2.1.4.
PAGE 45
ipInDiscards 1.3.6.1.2.1.4.8 2 ipInDiscards 1.3.6.1.2.1.4.8 The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of buffer space). This counter does not include any datagrams discarded while awaiting reassembly. ipInDelivers 1.3.6.1.2.1.4.9 The total number of input datagrams successfully delivered to IP user protocols (including ICMP). ipOutRequests 1.3.6.1.2.1.4.
PAGE 46
2 ipReasmOKs 1.3.6.1.2.1.4.15 ipReasmOKs 1.3.6.1.2.1.4.15 The number of IP datagrams successfully reassembled. ipReasmFails 1.3.6.1.2.1.4.16 The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, and so on). Note This is not necessarily a count of discarded IP fragments, because some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. ipFragOKs 1.3.6.1.2.1.4.
PAGE 47
ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2 2 ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2 The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3 The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
PAGE 48
2 ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex. ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 An alternate routing metric for this route.
PAGE 49
xipRouteProto 1.3.6.1.2.1.4.21.1.9 invalid (2) An invalidated route—route to directly direct (3) Connected (sub)network—route to a non-local indirect (4) Host/network/subnetwork xipRouteProto 2 1.3.6.1.2.1.4.21.1.9 The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. ipRouteAge 1.3.6.1.2.1.4.21.1.
PAGE 50
2 ipRouteInfo 1.3.6.1.2.1.4.21.1.13 ipRouteInfo 1.3.6.1.2.1.4.21.1.13 A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the Object Identifier { 0 0 }, which is a syntactically valid object identifier; any conferment implementation of ASN.1 and BER must be able to generate and recognize this value.
PAGE 51
ICMP Group 2 ICMP Group Implementation of the ICMP group is mandatory for all systems. icmpInMsgs 1.3.6.1.2.1.5.1 The total number of ICMP messages that the entity received. This counter includes all ICMP messages counted by icmpInErrors. icmpInErrors 1.3.6.1.2.1.5.2 The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on). icmpInDestUnreachs 1.3.6.1.2.1.5.3 The number of ICMP Destination Unreachable messages received.
PAGE 52
2 icmpInTimestamps 1.3.6.1.2.1.5.10 icmpInTimestamps 1.3.6.1.2.1.5.10 The number of ICMP Timestamp (request) messages received. icmpInTimestampReps 1.3.6.1.2.1.5.11 The number of ICMP Timestamp Reply messages received. icmpInAddrMasks 1.3.6.1.2.1.5.12 The number of ICMP Address Mask Request messages received. icmpInAddrMaskReps 1.3.6.1.2.1.5.13 The number of ICMP Address Mask Reply messages received. icmpOutMsgs 1.3.6.1.2.1.5.14 The total number of ICMP messages that this entity attempted to send.
PAGE 53
icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 2 icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 The number of ICMP Source Quench messages sent. icmpOutRedirects 1.3.6.1.2.1.5.20 The number of ICMP Redirect messages sent. For a host, this object is always 0, since hosts do not send redirects. icmpOutEchos 1.3.6.1.2.1.5.21 The number of ICMP Echo (request) messages sent. icmpOutEchoReps 1.3.6.1.2.1.5.22 The number of ICMP Echo Reply messages sent. icmpOutTimestamps 1.3.6.1.2.1.5.
PAGE 54
2 TCP Group TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP. Instances of object types that represent information about a particular TCP connection are transient; they persist only as long as the connection in question. tcpRtoAlgorithm 1.3.6.1.2.1.6.1 The algorithm used to determine the time-out value used for retransmitting unacknowledged octets. tcpRtoMin 1.3.6.1.2.1.6.
PAGE 55
tcpAttemptFails 1.3.6.1.2.1.6.7 2 tcpAttemptFails 1.3.6.1.2.1.6.7 The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. tcpEstabResets 1.3.6.1.2.1.6.8 The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
PAGE 56
2 tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnState 1.3.6.1.2.1.6.13.1.1 The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value.
PAGE 57
tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 2 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 The remote port number for this TCP connection. tcpInErrs 1.3.6.1.2.1.6.14 The total number of segments received in error (for example, bad TCP checksums). tcpOutRsts 1.3.6.1.2.1.6.15 The number of TCP segments sent containing the RST flag.
PAGE 58
2 UDP Group UDP Group Implementation of the UDP group is mandatory for all systems that implement the UDP. udpInDatagrams 1.3.6.1.2.1.7.1 The total number of UDP datagrams delivered to UDP users. udpNoPorts 1.3.6.1.2.1.7.2 The total number of received UDP datagrams for which there was no application at the destination port. udpInErrors 1.3.6.1.2.1.7.3 The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
PAGE 59
EGP Group 2 EGP Group Brocade does not support the EGP Group. This section is not applicable. Refer to the RFC1213 for complete information regarding the EGP Group. Transmission Group Brocade does not support the Transmission Group. This section is not applicable. Refer to the RFC1213 for complete information regarding the Transmission Group.
PAGE 60
2 SNMP Group SNMP Group Implementation of the SNMP group is mandatory for all systems that support an SNMP protocol entity. Some of the objects defined next are zero-valued in those SNMP implementations that are optimized to support only those functions specific to either a management agent or a management station. All of the objects that follow refer to an SNMP entity, and there might be several SNMP entities residing on a managed node (for example, if the node is acting as a management station).
PAGE 61
snmpInNoSuchNames 1.3.6.1.2.1.11.9 2 snmpInNoSuchNames 1.3.6.1.2.1.11.9 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “noSuchName.” snmpInBadValues 1.3.6.1.2.1.11.10 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “badValue.” snmpInReadOnlys 1.3.6.1.2.1.11.
PAGE 62
2 snmpInSetRequests 1.3.6.1.2.1.11.17 snmpInSetRequests 1.3.6.1.2.1.11.17 The total number of SNMP Set-Request PDUs that have been accepted and processed by the SNMP protocol entity. snmpInGetResponses 1.3.6.1.2.1.11.18 The total number of SNMP Get-Response PDUs that have been accepted and processed by the SNMP protocol entity. snmpInTraps 1.3.6.1.2.1.11.19 The total number of SNMP Trap PDUs that have been accepted and processed by the SNMP protocol entity. snmpOutTooBigs 1.3.6.1.2.1.11.
PAGE 63
snmpOutGetNexts 1.3.6.1.2.1.11.26 2 snmpOutGetNexts 1.3.6.1.2.1.11.26 The total number of SNMP Get-Next PDUs that have been generated by the SNMP protocol entity. snmpOutSetRequests 1.3.6.1.2.1.11.27 The total number of SNMP Set-Request PDUs that have been generated by the SNMP protocol entity. snmpOutGetResponses 1.3.6.1.2.1.11.28 The total number of SNMP Get-Response PDUs that have been generated by the SNMP protocol entity. snmpOutTraps 1.3.6.1.2.1.11.
PAGE 64
2 2-36 snmpEnableAuthenTraps 1.3.6.1.2.1.11.
PAGE 65
Chapter FE MIB Objects 3 This chapter provides descriptions and other information specific to FE MIB object types and includes the following information: • • • “FE MIB Overview” next “FIBRE-CHANNEL-FE-MIB (MIB-II branch)” on page 3-1 “FCFABRIC-ELEMENT-MIB (Experimental Branch)” on page 3-24 FE MIB Overview Brocade supports two versions of the FE MIB: • • FIBRE-CHANNEL-FE-MIB (RFC2837) in the MIB-II branch. FCFABRIC-ELEMENT-MIB in the experimental branch.
PAGE 66
3 FIBRE-CHANNEL-FE-MIB (MIB-II branch) The descriptions of each of the MIB variables in this chapter come directly from the FIBRECHANNEL-FE-MIB itself. The notes that follows the descriptions typically pertain to Brocade-specific information and are provided by Brocade. Note Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects except fcFxPortPhyAdminStatus.
PAGE 67
FIBRE-CHANNEL-FE-MIB Organization 3 FIBRE-CHANNEL-FE-MIB Organization Figures 3-1 through 3-5 depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso - org - dod - internet - mgmt - mib-2 - fcFeMIB - fcFeMIBObjects - fcFeConfig - fcFeStatus - fcFeError - fcFeAccounting - fcFeCapabilities - fcFeMIBConformance - fcFeMIBCompliances - fcFeMIBGroups Figure 3-1 fcFeMIB Hierarchy - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.
PAGE 68
3 FIBRE-CHANNEL-FE-MIB Organization - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 - fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 - fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 - fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 - fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.
PAGE 69
FIBRE-CHANNEL-FE-MIB Organization 3 - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 - fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 - fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 - fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 - fcFxPortC1InConnections 1.
PAGE 70
3 Definitions for FIBRE-CHANNEL-FE-MIB Definitions for FIBRE-CHANNEL-FE-MIB Table 3-2 lists the definitions for fcFeMIB. Table 3-2 FIBRE-CHANNEL-FE-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
PAGE 71
Definitions for FIBRE-CHANNEL-FE-MIB Table 3-2 3 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description FcStackedConnMode Integer from 1 to 3 Indicates the Class 1 Stacked Connect Mode supported by an Nx_Port or Fx_Port. 1 (none) 2 (transparent) 3 (lockedDown) FcCosCap Integer from 1 to 127 Class of service capability of an Nx_Port or Fx_Port.
PAGE 72
3 Definitions for FIBRE-CHANNEL-FE-MIB Table 3-2 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description Fc0Medium Integer 1 (unknown) 2 (sm) 4 (m5) 8 (m6) 16 (tv) 32 (mi) 64 (stp) 128 (tw) 256 (lv) Fc0TxType Integer 1 (unknown) 2 (longWaveLaser (LL)) 3 (shortWaveLaser (SL)) 4 (longWaveLED (LE)) 5 (electrical (EL)) 6 (shortWaveLaser-noOFC (SN)) Fc0Distance Integer The FC-0 distance range associated with a port transmitter: 1 (unknown) 2 (long) 3 (intermediate) 4 (short)
PAGE 73
fcFeConfig Group Table 3-2 3 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description FcFeFxPortIndex Integer from 1 to 256 Fx_Port index within a conceptual table. FcFeNxPortIndex Integer from 1 to 256 Nx_Port index within a conceptual table. FcFxPortMode Integer 1 (unknown) 2 (F_Port) 3 (FL_Port) FcBbCreditModel Integer BB_Credit model of an Fx_Port. 1 (regular) 2 (alternate) fcFeConfig Group This group consists of scalar objects and tables.
PAGE 74
3 fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 An entry containing the configuration parameters of a module. Index 1: fcFeModuleIndex fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity. This entry never shows any value as it is shown as non accessible in the browser. fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.
PAGE 75
fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 3 fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 The number of Fx_Ports that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be contiguous.
PAGE 76
3 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 The World Wide Name of this Fx_Port. Each Fx_Port has a unique port World Wide Name within the fabric. Return Displays the WWN of the port. fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 The highest or most recent version of FC-PH that the Fx_Port is configured to support. This value is always 32. fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.
PAGE 77
fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 3 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 A value indicating the mode of Stacked Connect supported by the Fx_Port. fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12 A flag indicating whether Class 2 Sequential Delivery is supported by the Fx_Port. fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.
PAGE 78
3 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 The number of buffers currently available for receiving frames from the attached port in the buffer-tobuffer flow control. The value should be less than or equal to fcFxPortBbCredit. fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 The current operational mode of the Fx_Port. Values Possible values are: 1: unknown(1) 2: fPort(2) 3: flPort(3) fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.
PAGE 79
fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 3 The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of either explicit management action or per configuration information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline state (2). fcFxPortPhysOperStatus 1.3.6.1.2.
PAGE 80
3 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 An entry containing service parameters established from a successful fabric login. Indexes 1: fcFeModuleIndex 2: fcFxPortIndex 3: fcFxPortNxLoginIndex fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 The associated Nx_Port in the attachment for which the entry contains information. fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 The version of FC-PH that the Fx_Port has agreed to support from the fabric login.
PAGE 81
fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 3 fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 Indicates whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed to. Values Possible values are: • • yes (1) The Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. no (2) The Fx_Port has not agreed to support Class 2 sequential delivery from the fabric login.
PAGE 82
3 fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 A table that contains counters that record the numbers of errors detected, one entry for each Fx_Port. This table contains counters recording numbers of errors detected since the management agent reinitialized, one entry for each Fx_Port in the fabric element. The first six columnar objects after the port index correspond to the counters in the link error status block. fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.
PAGE 83
fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 3 fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 The number of address identifier errors detected by this Fx_Port. fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.
PAGE 84
3 fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 The number of Class 1 frames (other than Class 1 connect-request) received by this Fx_Port from its attached Nx_Port. fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port. fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.
PAGE 85
fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 3 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 The cumulative time that this Fx_Port has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset. fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.
PAGE 86
3 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 The number of F_RJT frames generated by this Fx_Port against Class 2 frames. fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 A table that contains Class 3 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element. fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 An entry containing Class 3 accounting information for each Fx_Port.
PAGE 87
fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 3 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 A table that contains the capabilities of the port within the fabric element, one entry for each Fx_Port. fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 An entry containing the capabilities of a Fx_Port. Augments: 1: fcFxPortEntry fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 The highest or most recent version of FC-PH that the Fx_Port is capable of supporting. fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.
PAGE 88
3 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.
PAGE 89
FCFABRIC-ELEMENT-MIB (Experimental Branch) • 3 “fcFeCap Group” on page 3-44 Note Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects except “fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1”. The descriptions of each of the MIB variables in this chapter come directly from the FCFABRICELEMENT-MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade.
PAGE 90
3 FCFABRIC-ELEMENT-MIB Organization FCFABRIC-ELEMENT-MIB Organization Figures 3-7 through 3-12 depict the organization and structure of FCFABRIC-ELEMENT-MIB.
PAGE 91
FCFABRIC-ELEMENT-MIB Organization 3 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.3.6.1.3.
PAGE 92
3 FCFABRIC-ELEMENT-MIB Organization - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 - fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 - fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 - fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 - fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.
PAGE 93
FCFABRIC-ELEMENT-MIB Organization 3 - fcFeError (1.3.6.1.3.42.2.1.3) - fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.1 - fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 - fcFxPortErrorModuleIndex 1.3.6.1.3.42.2.1.3.1.1.1 - fcFxPortErrorFxPortIndex 1.3.6.1.3.42.2.1.3.1.1.2 - fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 - fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 - fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 - fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 - fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.
PAGE 94
3 Definitions for FCFABRIC-ELEMENT-MIB Definitions for FCFABRIC-ELEMENT-MIB The following definitions are used for FCFABRIC-ELEMENT-MIB. Table 3-3 FCFABRIC-ELEMENT-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
PAGE 95
Definitions for FCFABRIC-ELEMENT-MIB Table 3-3 3 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description FcCosCap Integer from 1 to 127 bit 0 (Class F) bit 1 (Class 1) bit 2 (Class 2) bit 3 (Class 3) bit 4 (Class 4) bit 5 (Class 5) bit 6 (Class 6) bit 7 (reserved for future) Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
PAGE 96
3 fcFeConfig Group Table 3-3 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description Fc0TxType Integer 1 (unknown) 2 (longWaveLaser (LL)) 3 (shortWaveLaser (SL)) 4 (longWaveLED (LE)) 5 (electrical (EL)) 6 (shortWaveLaser-noOFC (SN)) Fc0Distance Integer The FC-0 distance range associated with a port transmitter: 1 (unknown) 2 (long) 3 (intermediate) 4 (short) FcFeModuleCapacity Integer from 1 to 256 Represents the maximum number of modules within a Fabric Element.
PAGE 97
fcElementName 1.3.6.1.3.42.2.1.1.2 3 fcElementName 1.3.6.1.3.42.2.1.1.2 The Name_Identifier of the fabric element. Return Returns the WWN of the switch. fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. The SilkWorm 12000, 24000, and 48000 directors do not support this MIB variable. fc Fabric Element Module Table This table contains one entry for each module, information of the modules. fcFeModuleTable 1.3.6.1.3.42.2.1.1.
PAGE 98
3 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its ‘FeFiFo-16 PlugInCard.’ See “sysObjectID 1.3.6.1.2.1.1.2” on page 2-9. fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 Indicates the operational status of the module: • • • • online (1) The module is functioning properly. offline (2) The module is not available.
PAGE 99
fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 Index 3 FcFxConfModuleIndex, fcFxConfFxPortIndex fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 Identifies the module containing the Fx_Port for which this entry contains information. fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
PAGE 100
3 fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition. fcFxPortCosSupported 1.3.6.1.3.42.2.1.1.5.1.10 A value indicating the set of Classes of Service supported by the Fx_Port. Values Possible values are: • • • • • • • Class F (0) Class 1 (1) Class 2 (2) Clas 3 (3) Class 4 (4) Class 5 (5) Class 6 (6) fcFxPortIntermixSupported 1.3.6.1.3.
PAGE 101
fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 • • 3 yes (1) no (2) fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 The FC-0 baud rate of the Fx_Port. The SilkWorm 12000, 24000, and 48000 directors do not support this MIB variable. fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.
PAGE 102
3 fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 Index fcFxPortOperModuleIndex, fcFxPortOperFxPortIndex fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information. fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module.
PAGE 103
fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 3 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 A table that contains, one entry for each Fx_Port in the fabric element, physical level status and parameters of the Fx_Ports. fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 An entry containing physical level status and parameters of an Fx_Port. Index fcFxPortPhysModuleIndex, fcFxPortPhysFxPortIndex fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.
PAGE 104
3 fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
PAGE 105
fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4 3 fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4 The version of FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 The total number of buffers available for holding Class 1 connect-request Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port.
PAGE 106
3 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Values Possible values are: • • yes (1) no (2) fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 The port name of the attached Nx_Port, if applicable.
PAGE 107
fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 3 fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 An entry containing error counters of an Fx_Port. Index fcFxPortErrorModuleIndex, fcFxPortErrorFxPortIndex fcFxPortErrorModuleIndex 1.3.6.1.3.42.2.1.3.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information. fcFxPortErrorFxPortIndex 1.3.6.1.3.42.2.1.3.1.1.2 Identifies the Fx_Port within the module.
PAGE 108
3 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 The number of address identifier errors detected by this Fx_Port. fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.1.1.12 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. fcFxPortOlsIns 1.3.6.1.3.42.2.1.3.1.1.
PAGE 109
fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 3 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information. fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.
PAGE 110
3 fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. Values Possible values are: • • yes (1) no (2) fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.
PAGE 111
fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.17 3 fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.17 A value indicating the set of media that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility.
PAGE 112
3 3-48 fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.
PAGE 113
Chapter Entity MIB Objects 4 This chapter provides descriptions and other information specific to Entity MIB object types and includes the following information: • • • • • • • • • “Entity MIB Overview” next “Textual Conventions” on page 4-4 “Entity MIB Objects” on page 4-6 “Physical Entity Group” on page 4-6 “Logical Entity Group” on page 4-13 “Entity Mapping Group” on page 4-15 “General Group” on page 4-18 “Entity MIB Trap” on page 4-18 “Entity MIB Conformance Information” on page 4-19 Entity MIB Ove
PAGE 114
4 Entity MIB Overview Entity MIB System Organization of MIB Objects Figure 4-1 through Figure 4-8 depict the organization and structure of the Entity MIB file system. - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups Figure 4-1 Overall Tree Structure for Entity MIB - entityPhysical - entPhysicalTable 1.3.6.1.2.1.47.1.1.
PAGE 115
Entity MIB Overview 4 - entityLogical - entLogicalTable 1.3.6.1.2.1.47.1.2.1 - entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 - entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 - entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 - entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 - entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 - entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 - entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 - entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 - entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.
PAGE 116
4 Textual Conventions Definitions for Entity MIB Table 4-1 lists the objects or definitions that are imported into the Entity MIB and the modules from which they are imported.
PAGE 117
SnmpEngineIdOrNone Syntax 4 Integer Table 4-2 Possible Values for PhysicalClass Values Description other (1) The physical entity class is known but does not match any of the supported values. unknown (2) The physical entity class is unknown to the agent. chassis (3) The physical entity class is an overall container for networking equipment. Any class of physical entity except a stack can be contained within a chassis, and a chassis might be contained only within a stack.
PAGE 118
4 Entity MIB Objects Syntax • For the SilkWorm 3016 or SilkWorm 4020 blades, the snmpEngineID takes the UUID value. For example, if the UUID value is A9914D56-1E5A-0E59-C51E-528802B06E4F, the snmpEngineID displays 80.00.06.34.B1.A9.91.4D.56.1E.5A.0E.59.C5.1E.52.88.02.B0.6E.4F (hex) • For other switches, the snmpEngineID takes the WWN. For example, if the WWN value is 10:00:00:05:1e:35:d5:ee, the snmpEngineID displays 80.00.06.34.B2.10.00.00.05.1E.35.D5.
PAGE 119
entPhysicalTable 1.3.6.1.2.1.47.1.1.1 4 This object is implemented for Fabric OS v4.1 and above. The “overall” physical entry for Brocade is the chassis, and in Fabric OS v4.4 and above it is marked as a FRU.
PAGE 120
4 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table. Index 1: entPhysicalIndex entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 The index for this entry.
PAGE 121
entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 4 entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value that most accurately indicates the general class of the physical entity, or the primary class if there is more than one. If no appropriate standard registration identifier exists for this physical entity, then the value other(1) is returned.
PAGE 122
4 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 If the agent cannot determine the parent-relative position for some reason, or if the associated value of entPhysicalContainedIn is 0, then the value -1 is returned; otherwise, a non-negative integer is returned, indicating the parent-relative position of this physical entity. Parent-relative ordering normally starts from 1 and continues to n, where n represents the highestpositioned child entity.
PAGE 123
entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 4 Set to an empty string. entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
PAGE 124
4 entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 Note that comparisons between instances of the entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and the entPhysicalSerialNum objects are meaningful only amongst entPhysicalEntries with the same value of entPhysicalMfgName. If the manufacturer name string associated with the physical component is unknown to the agent, then this object contains a zero-length string. Set to empty string. entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.
PAGE 125
entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 4 If no asset tracking information is associated with the physical component, then this object contains a zero-length string. Set to empty string. entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 The entPhysicalIsFRU object indicates whether this physical entity is considered a field replaceable unit by the vendor. If this object contains the value “true(1),” then this entPhysicalEntry identifies a field replaceable unit.
PAGE 126
4 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 An indication of the type of logical entity. This is typically the Object Identifier name of the node in the SMI’s naming hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. • • • a logical entity of a regular host/router -> mib-2 a logical entity of a 802.1d bridge -> dot1dBridge a logical entity of a 802.
PAGE 127
entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 4 entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are currently found in the Transport Mappings for SNMPv2 document (RFC1906). entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.
PAGE 128
4 entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 Suppose a bridge is realized on a particular module and all ports on that module are ports on this bridge. A mapping between the bridge and the module would be useful, but additional mappings between the bridge and each of the ports on that module would be redundant (since the entPhysicalContainedIn hierarchy can provide the same information).
PAGE 129
entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 4 If this object has a nonzero value, then it identifies the logical entity named by the same value of entLogicalIndex. If this object has a value of zero, then the mapping between the physical component and the alias identifier for this entAliasMapping entry is associated with all unspecified logical entities.
PAGE 130
4 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 A single container / containee relationship. Indexes 1: entPhysicalIndex 2: entPhysicalChildIndex entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 The value of entPhysicalIndex for the contained physical entity. General Group entLastChangeTime 1.3.6.1.2.1.47.1.4.
PAGE 131
Entity MIB Conformance Information 4 Entity MIB Conformance Information This section lists the entityConformance MIBs. Figure 4-7 on page 4-3 shows the structure of the entityConformance group. entityCompliance 1.3.6.1.2.1.47.3.1.1 The compliance statement for SNMP entities that implement version 1 of the Entity MIB. Status Mandatory Groups Deprecated 1: entityPhysicalGroup 2: entityLogicalGroup 3: entityMappingGroup 4: entityGeneralGroup 5: entityNotificationsGroup entity2Compliance 1.3.6.1.2.1.47.3.
PAGE 132
4 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 The collection of objects used to represent physical system components, for which a single agent provides management information. Objects 1: entPhysicalDescr 2: entPhysicalVendorType 3: entPhysicalContainedIn 4: entPhysicalClass 5: entPhysicalParentRelPos 6: entPhysicalName entityLogicalGroup 1.3.6.1.2.1.47.3.2.
PAGE 133
entityNotificationsGroup 1.3.6.1.2.1.47.3.2.5 4 entityNotificationsGroup 1.3.6.1.2.1.47.3.2.5 The collection of notifications used to indicate Entity MIB data consistency and general status information. Notifications 1: entConfigChange entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
PAGE 134
4 4-22 entityLogical2Group 1.3.6.1.2.1.47.3.2.
PAGE 135
Chapter SW-MIB Objects 5 This chapter contains descriptions and other information specific to FC Switch MIB (SW-MIB) object types.
PAGE 136
5 SW MIB Overview SW-MIB System Organization of MIB Objects Figure 5-1 through Figure 5-14 depict the organization and structure of SW-MIB.
PAGE 137
SW MIB Overview 5 - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 - swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 - swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 - swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 - swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 138
5 SW MIB Overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 - swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 - swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 - swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 - swNbIslState 1.3.6.1.4.1.
PAGE 139
SW MIB Overview 5 - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 - swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 - swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 - swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
PAGE 140
5 SW MIB Overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 - swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 - swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 - swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 - swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
PAGE 141
SW MIB Overview 5 - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 - swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 - swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 - swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 142
5 SW MIB Overview - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.
PAGE 143
SW MIB Overview 5 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 - swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 - swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 - swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 - swTrunkGrpNumber 1.3.6.1.4.1.
PAGE 144
5 SW MIB Overview Table 5-1 SW-MIB Textual Conventions Type Definition Value Description FcWwn Octet String of size 8 The World Wide Name (WWN) of Brocade-specific products and ports. SwDomainIndex Integer of size 1 to 239 Fibre Channel domain ID of the switch. SwNbIndex Integer of size 1 to 2048 Index of the neighbor inter-switch link (ISL) entry. SwSensorIndex Integer of size 1 to 1024 Index of the sensor entry.
PAGE 145
SW MIB Overview Table 5-1 5 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwLevels Integer Threshold values or action matrix level: 1 swFwReserved 2 swFwDefault 3 swFwCustom SwFwClassesAreas Integer Classes and area index: 1 swFwEnvTemp 2 swFwEnvFan 3 swFwEnvPs 4 swFwTransceiverTemp 5 swFwTransceiverRxp 6 swFwTransceiverTxp 7 swFwTransceiverCurrent 8 swFwPortLink 9 swFwPortSync 10 swFwPortSignal 11 swFwPortPe 12 swFwPortWords 13 swFwPortCrcs 14 swFwPortRXPerf 15 swFwP
PAGE 146
5 sw Traps Table 5-1 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwWriteVals Integer Write-only variable for applying or canceling values or action matrix changes: 1 swFwCancelWrite 2 swFwApplyWrite SwFwTimebase Integer Timebase for thresholds: 1 swFwTbNone 2 swFwTbSec 3 swFwTbMin 4 swFwTbHour 5 swFwTbDay SwFwStatus Integer Status for thresholds: 1 disabled 2 enabled SwFwEvent Integer Possible events available: 1 started 2 changed 3 exceeded 4 below 5 above 6
PAGE 147
swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 5 See Table 5-2 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap, if possible. Table 5-2 SW MIB Traps Name Specific When Configure “swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1” on page 5-13 (not supported) 1 During boot, if diagnostics fail N.A. “swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2” on page 5-14 2 Obsolete N.A. “swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3” on page 5-14 3 Port changes state Always on “swEventTrap 1.3.6.
PAGE 148
5 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 Enterprise Variables sw “swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” A swFault is generated whenever the diagnostics detect a fault with the switch. #TYPE Switch is faulty. #SUMMARY Faulty reason: %d and SSN is #%s #ARGUMENTS 0, 1 #SEVERITY Critical #TIMEINDEX 1 #STATE Nonoperational swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 (Obsoleted by swFabricWatchTrap) Enterprise Variables sw “swSensorStatus 1.3.6.1.4.1.
PAGE 149
swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 Variables 5 “swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4” “swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1” “swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” A swFCPortScn (3) is generated whenever an FC_Port changes its operational state: for instance, the FC_Port goes from online to offline.
PAGE 150
5 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 #ARGUMENTS 0, 1, 2, 4, 5 #SEVERITY Informational #TIMEINDEX 1 #STATE Operational Each Trap recipient has a configured severity level association. Whenever an error message is generated at or above that configured severity level the recipient is notified of the event. This trap is generated for all RASLog messages. From Fabric OS 4.4.0 this trap is only generated for external RASLog messages. Sample trap output for Fabric OS 4.4.0: swEventIndex.
PAGE 151
swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 #ARGUMENTS 2, 0, 1, 6, 4, 5, 7, 8 #SEVERITY Warning #TIMEINDEX 1 #STATE Operational 5 See the Fabric Watch Administrator’s Guide for information on setting thresholds in Fabric Watch. Sample trap output for Fabric OS 4.4.0: swFwClassAreaIndex.1 = swFwEnvTemp(1) swFwThresholdIndex.1.2 = 2 swFwName.1.2 = envTemp001 swFwLabel.1.2 = Env Temperature 1 swFwLastEventVal.1.2 = 45 swFwLastEventTime.1.2 = 06:17:01 on 08/12/2004 swFwLastEvent.1.
PAGE 152
5 swSystem Group This trap gets sent when track-changes is set to ENABLED and is configured to send SNMP traps on track events. Use the trackchangesset command to enable the track changes feature and SNMP trap mode. swSystem Group swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 The current date and time.
PAGE 153
swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 5 ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 The date and time when the firmware was last downloaded or the configuration file was last changed.
PAGE 154
5 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 The current version of the firmware. The return value is displayed using the following format: vM.m.f Where: v = deployment indicator M = major version m = minor version f = software maintenance version For example, v5.2.0_main_bld36 described firmware version 5.2.0 and the specific build number 36. Some versions may not have a build number and will appear as the version. An example might be v5.2.
PAGE 155
swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 5 The switchReboot (7) value only applies to the SilkWorm 12000, 24000, and 48000 directors. swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 The desired administrative status of the telnet shell. Setting this value to 1 (terminated), deletes the current telnet shell task. When this variable instance is read, it reports the value last set through SNMP. This OID is supported in Fabric OS v2.x through v3.x. This OID is not supported in Fabric OS v4.
PAGE 156
5 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for FOS v4.4 and above. The value displayed is always "swCurrent(1)". Values Possible values are: • • • • swCurrent (1) The flash contains the current firmware image or configuration file. swCfUpload (3) The switch configuration file is to be uploaded to the host specified.
PAGE 157
swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 5 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 The name or IP address (in dot notation) of the host to download or upload a relevant file to the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for FOS v4.4 and above. The value displayed is always NULL (zero-length). swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 158
5 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 The result of the power-on startup test (POST) diagnostics. Values Possible values are: • • • sw-ok (1) The switch is okay. sw-faulty (2) The switch has experienced an unknown fault. sw-embedded-port-fault (3) The switch has experienced an embedded port fault. swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch.
PAGE 159
swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 5 swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 An entry of the sensor information. Index swSensorIndex swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 The index of the sensor. The values are 1 through the value in swNumSensors. swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 The type of sensor. swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 The current status of the sensor.
PAGE 160
5 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 Additional information on the sensor. It contains the sensor type and number, in textual format; for example: SLOT #0: TEMP #3 FAN #1 Power Supply #1 Return values for the SilkWorm 12000, 24000, and 48000 directors depend upon the configuration of your system. swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 Track changes string; for trap only.
PAGE 161
swFCIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.28 5 swFCIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.28 Not supported in Fabric OS v3.2.0. The IP mask of the FC interface of this logical switch. swFabric Group swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state. swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 Indicates whether the switch is the principal switch.
PAGE 162
5 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 This value is the same as the physical port number of the local switch +1. The valid values for the SilkWorm 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW. swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.
PAGE 163
swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 5 swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 Supported in Fabric OS v2.6.1 and not v3.2.0. This table contains information on the member switches of a fabric. This might not be available on all versions of Fabric OS. swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 An entry containing each switch in the fabric. Index swFabricMemWwn swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 This object identifies the World Wide Name of the member switch.
PAGE 164
5 swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.11 Provides the short version of the Fabric OS version number. It gives v260 for Fabric OS v2.6.x. swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.11 This identifies the status of Insistent Domain ID (IDID) mode. Status indicating if IDID mode is enabled or not. SW Agent Configuration Group swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.11 A table that contains, one entry for each community, the access control and parameters of the community.
PAGE 165
swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 5 You can change the community setting using the agtCfgSet command. swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.
PAGE 166
5 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 SilkWorm 12000 64 ports (per logical switch) SilkWorm 24000 (2 logical switches64 ports (per logical switch) SilkWorm 24000 (1 logical switch) 128 ports SilkWorm 48000 256 ports swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 A bit map of port status flags that includes the information of port type. Indicates whether the port is virtual or physical. Index swFCPortEntry swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.
PAGE 167
swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 5 swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 The physical state of the port. Values Possible values are: • • noCard (1) No card is present in this switch slot. • • • • • • • laserFault (3) The module is signaling a laser fault (defective GBIC). noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on). noLight (4) The module is not receiving light.
PAGE 168
5 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Values Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop). • • disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports.
PAGE 169
swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 5 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 Counts the number of Class 2 frames that the port has received. swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 Counts the number of Class 3 frames that the port has received. swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 Counts the number of link control frames that the port has received. swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
PAGE 170
5 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 Counts the number of encoding error or disparity error outside frames received. swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 Counts the number of invalid ordered sets received. swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 Counts the number of Class 3 frames that the port has discarded. swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
PAGE 171
swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 5 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. Note The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 This string indicates the physical port number of the addressed port.
PAGE 172
5 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 The index of the Name Server database entry. swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 The Fibre Channel port address ID of the entry. swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 The type of port for this entry. Values Possible values, as defined in FC-GS-2, are: • • nPort (1) nlPort (2) swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 The Fibre Channel WWN of the port entry. swNsPortSymb 1.3.6.1.4.1.
PAGE 173
swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 5 swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 The IP address of the node for the entry as defined in FC-GS-2. The format of the address is in IPv6. swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 The class of services supported by the port.
PAGE 174
5 Event Group Event Group Logically, the swEventTable is separate from the error log since it is essentially a view of the error log within a particular time window. swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4, in the absence of swEventTrapLevel, specifies the trap severity level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event’s severity level.
PAGE 175
swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 5 The return string is displayed using the following format: YYYY/MM/DD-hh:mm:ss Where: YYYY = Year MM = Month DD = Date hh = Hour mm = Minute ss = Seconds For example: 2005/12/05-07:33:41 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 The severity level of this event entry. Values Possible values are: • • • • critical (1) error (2) warning (3) informational (4) swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.
PAGE 176
5 swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 • One table, “swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2”, contains classArea information such as threshold unit string, time base, low thresholds, and so forth. SwFwClassAreaEntry contains control information for a particular class/area's thresholds. • The other table, “swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3”, contains individual threshold information such as name, label, last event, and so forth.
PAGE 177
swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 5 C = environment (class), temperature (area). RPM = environment (class), fan (area). swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 A default polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area). swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 A default low threshold value. swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 178
5 swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 A customizable buffer size value for a Fabric Watch classArea combination. swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel is used to point to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
PAGE 179
swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 5 swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 Default action matrix for changed event. swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold. swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 Default action matrix for below event. swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 180
5 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 Matrix of valid acts for a classArea. swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 Pointer to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
PAGE 181
swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 5 envTemp002: index of 3 envTemp003: index of 4 envTemp004: index of 5 envTemp005: index of 6 For port-related classes such as E_Port, the indexes are from 1 through (number of ports).
PAGE 182
5 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 For examples, see Table 5-4.
PAGE 183
swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.
PAGE 184
5 swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 Last event time of the threshold. This value is in the same format as in swCurrentDate. swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 Last event state of the threshold. swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 A behavior of which the thresholds generate event. swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 An integer of which the thresholds generate continuous event.
PAGE 185
swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 5 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 This object represents the AL_PA of the end device. SNMP AL_PA number should be the logical AL_PA number plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef. This is an obsolete entry and does not show any value. swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 The Fibre Channel port address ID of the entry. swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.
PAGE 186
5 swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 An entry of table of groups. Index swGroupIndex swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 This object is the group index, starting from 1. swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 This object identifies the name of the group. swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 This object identifies the type of the group. swGroupMemTable 1.3.6.1.4.1.1588.2.1.1.1.22.2 The table of members of all groups.
PAGE 187
ASIC Performance Monitoring Group 5 ASIC Performance Monitoring Group swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 AL_PA monitoring counter table. For the SilkWorm 4100, 12 filter monitors per port are supported. swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 AL_PA monitoring counter for given AL_PA. Index swEndDevicePort, swEndDeviceAlpa swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 This object identifies the port index of the switch. swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.
PAGE 188
5 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 This object identifies the port number of the switch. swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 This object identifies the reference number of the counter. This reference is a number assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual reference key. swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.
PAGE 189
swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 5 swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 This object identifies the port number of the switch. swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 This object identifies the reference number of the filter. This reference number is assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key. swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 Get statistics of filter-based monitor.
PAGE 190
5 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 This object identifies the switch port index. The value of a port index is 1 higher than the port number labeled on the front panel. For example, port index 1 corresponds to port number 0. swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 This object is a logical entity that specifies the group number to which the port belongs. If this value is 0, the port is not trunked. swTrunkMaster 1.3.6.1.4.1.
PAGE 191
swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 5 Note The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wtx value) for the corresponding trunk ports. swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 Gives the aggregate value of the received words by this trunk group.
PAGE 192
5 5-58 swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.
PAGE 193
Chapter High-Availability MIB Objects 6 This chapter provides descriptions and other information specific to High-Availability MIB object types and includes the following sections: • • • • • • “HA MIB Overview” next “High-Availability Group” on page 6-3 “FRU Table” on page 6-3 “FRU History Table” on page 6-6 “CP Table” on page 6-7 “HA-MIB Traps” on page 6-8 HA MIB Overview The HA-MIB provides information about the High Availability features of Fabric OS v4.x.
PAGE 194
6 HA MIB Overview Figure 6-1 and Figure 6-2 depict the organization and structure of the HA-MIB file system. - iso - org - dod - internet - private - enterprises - bsci - commDev - fibreChannel - haMIB - highAvailability - haMIBTraps Figure 6-1 HA-MIB Overall Tree Structure - haMIB (1.3.6.1.4.1.1588.2.1.2) - highAvailability (1.3.6.1.4.1.1588.2.1.2.1) - haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.
PAGE 195
High-Availability Group 6 Table 6-1 lists the objects or definitions that are imported into the HA-MIB and the modules from which they are imported.
PAGE 196
6 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 This table contains an entry for each entry in the entPhysicalTable that has entPhysicalClass set to “Container (5)” and has a child entry having entPhysicalIsFRU set to “true (1)”. In Fabric OS v4.4 and above the chassis is marked as a FRU. Unlike other FRUs the chassis FRU does not have a corresponding container entry. Table 6-2 on page 6-4 includes information on all FRUs except the chassis.
PAGE 197
fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 • • • 6 7: wwn(7) 8: powerSupply(8) 9: fan(9) fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 The current status of the FRU object in the slot. Values Possible values are: • • • • • 1: other(1) 2: unknown(2) 3: on(3) 4: off(4) 5: faulty(5) fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 The slot number of the blade, and the unit number for everything else. fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 The supplier ID. fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.
PAGE 198
6 FRU History Table FRU History Table fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 This table gives the contents of the entire history log of the FRU events. fruHistoryEntry 1.3.6.1.4.1.1588.2.1.2.1.6.1 An entry in this table represents a particular FRU event. Index fruHistoryIndex fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 Index of the FRU event in the history table. fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 The type of the FRU object related to the event.
PAGE 199
fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 • 6 3: invalid(3) fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 The time at which this event happened. fruHistoryFactoryPartNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 The Brocade part number of the FRU object. fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 The Brocade serial number of the FRU object. CP Table cpTable 1.3.6.1.4.1.1588.2.1.2.1.7 This table lists all the CPs in the system. cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.
PAGE 200
6 cpIpMask 1.3.6.1.4.1.1588.2.1.2.1.7.1.3 cpIpMask 1.3.6.1.4.1.1588.2.1.2.1.7.1.3 The IP mask of the Ethernet interface of this CP. cpIpGateway 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 The IP address of the IP gateway for this CP. cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 The last event related to this CP.
PAGE 201
cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 6 Sample trap output for Fabric OS v4.4.0; The following trap is generated when switch is rebooted: entPhysicalName.11 = MODULE 5 fruStatus.11 = off(4) cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 Objects 1: cpStatus 2: cpLastEvent 3: swID 4: swSsn Status Current This trap is sent when the status of any CP object changes. The cpLastEvent variable provides the information about the event that occurred.
PAGE 202
6 fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 HA-MIB Traps and Sample Triggers The following table lists the HA-MIB traps and sample events that will trigger them.
PAGE 203
Chapter FICON MIB Objects 7 This chapter provides descriptions and other information specific to FICON MIB (LINK-INCIDENTMIB) object types, including the following information: • • • • • “FICON MIB Overview” next “ficonRNID Group” on page 7-5 “ficonLIRR Group” on page 7-8 “ficonRLIR Group” on page 7-10 “linkIncidentMIBTraps Group” on page 7-11 FICON MIB Overview The FICON MIB module (LINK-INCIDENT-MIB) defines support for FICON in Fabric OS v4.1.2 and later.
PAGE 204
7 FICON MIB Overview FICON MIB System Organization of MIB Objects Figure 7-1 and Figure 7-3 depict the organization and structure of the FICON MIB file system.
PAGE 205
FICON MIB Overview 7 - linkIncidentMIB - ficonRNID - nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 - nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 - nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 - nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1 - nodeRNIDIncidentPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.2 - nodeRNIDPID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.3 - nodeRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.4 - nodeRNIDType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.5 - nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
PAGE 206
7 FICON MIB Overview - linkIncidentMIBTraps - linkIncidentMIBTrapPrefix - linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 - linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 - linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 - linkLIRRListenerRemoved 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 - linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 Figure 7-3 linkIncidentMIBTraps Hierarchy Textual Conventions Table 7-1 lists the textual conventions for the FICON MIB.
PAGE 207
ficonRNID Group Table 7-1 7 FICON MIB Textual Conventions (Continued) Name Status Description Syntax RegType Current Represents the RNID Registration Type. INTEGER { conditional (1), unconditional (2) } RNIDSequenceNumber Current Sequence number of the self describing node. OCTET STRING (SIZE (12)) RNIDManufacturerPlant Current Represents the manufacturer plant name or code. OCTET STRING (SIZE (2)) RNIDParams Current Represents the value of Param.
PAGE 208
7 nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 A table that contains one entry for each FICON RNID node attached to a switch. nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 A entry containing the RNID information for a FICON node. Index nodeRNIDIndex nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1 Index into the nodeRNIDTable. nodeRNIDIncidentPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.2 Port WWN for Incident port.
PAGE 209
nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 7 nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 Identifies the sequence number of the node. nodeRNIDConnectedPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.10 WWN of the connected port. nodeRNIDPortType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.11 Port type (N, NL, or virtual port) of the connected port. nodeRNIDFormat 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.12 Node identification data format of the connected port. nodeRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
PAGE 210
7 switchRNIDSwitchWWN 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 switchRNIDSwitchWWN 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 WWN of the switch. switchRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3 RNID flags for the switch. switchRNIDType 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4 Type Number associated with the switch. switchRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5 Model number of the RNID switch. switchRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6 Identifies the manufacturer of the switch.
PAGE 211
LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 7 LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 The number of entries in an LIRR table. See the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. LIRRTable 1.3.6.1.4.1.1588.2.1.1.50.3.2 A table that contains LIRR information, one entry for each LIRR incident for an attached FICON device. LIRREntry 1.3.6.1.4.1.1588.2.1.1.50.3.2.1 An entry containing LIRR information. LIRRIndex 1.3.6.1.4.1.1588.2.1.
PAGE 212
7 ficonRLIR Group ficonRLIR Group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 The number of entries in a switch RLIR table. See the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 A table that contains RLIR information, one entry for each LIRR incident for an attached FICON device. rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.
PAGE 213
rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 7 rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 RLIR Connected port WWN. rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 RLIR Connected node WWN. rLIRFabricWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 RLIR Fabric WWN. rLIRLinkFailureType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11 RLIR Link failure type. rLIRTimeStamp 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 RLIR time stamp. rLIRFormat 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 RLIR Format.
PAGE 214
7 linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 Objects 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 A listener for link failure incident is added. Objects 1: lIRRListenerPortWWN 2: lIRRListenerPID 3: lIRRIndex linkLIRRListenerRemoved 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 A listener for link failure incident was removed. Objects 1: lIRRListenerPortWWN 2: lIRRListenerPID 3: lIRRIndex linkRLIRFailureIncident 1.3.6.1.
PAGE 215
Chapter FibreAlliance MIB Objects 8 This chapter contains descriptions and other information specific to FibreAlliance MIB (FCMGMTMIB) object types, including the following: • • • • • • • • “FibreAlliance MIB Overview” next “ConnSet Group” on page 8-8 “Statistics Group” on page 8-33 “Service Group” on page 8-41 “SNMP Trap Registration Group” on page 8-43 “Revision Number Scalar” on page 8-45 “Unsupported Tables” on page 8-46 “FibreAlliance MIB Traps” on page 8-46 FibreAlliance MIB Overview The descrip
PAGE 216
8 FibreAlliance MIB Overview - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + connUnitEventTable 1.3.6.1.3.94.1.11 + connUnitLinkTable 1.3.6.1.3.94.1.12 - trapReg - trapMaxClients 1.3.6.1.3.94.2.1 - trapClientCount 1.3.6.1.3.94.2.2 + trapRegTable 1.3.6.1.3.94.2.3 - revisionNumber 1.3.6.1.3.
PAGE 217
FibreAlliance MIB Overview 8 - connUnitRevsTable 1.3.6.1.3.94.1.7 - connUnitRevsEntry 1.3.6.1.3.94.1.7.1 - connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 - connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 - connUnitRevsRevId 1.3.6.1.3.94.1.7.1.3 - connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 Figure 8-3 ConnUnitRevsTable Hierarchy - connUnitSensorTable 1.3.6.1.3.94.1.8 - connUnitSensorEntry 1.3.6.1.3.94.1.8.1 - connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 - connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 - connUnitSensorName 1.3.
PAGE 218
8 FibreAlliance MIB Overview - connUnitEventTable 1.3.6.1.3.94.1.11 - connUnitEventEntry 1.3.6.1.3.94.1.11.1 - connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 - connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 - connUnitEventId 1.3.6.1.3.94.1.11.1.3 - connUnitREventTime 1.3.6.1.3.94.1.11.1.4 - connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 - connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 - connUnitEventType 1.3.6.1.3.94.1.11.1.7 - connUnitEventObject 1.3.6.1.3.94.1.11.1.8 - connUnitEventDescr 1.3.6.1.3.94.1.11.1.
PAGE 219
FibreAlliance MIB Overview 8 - connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 - connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 - connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 - connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 - connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 - connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 - connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 - connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 - connUnitPortStatCountBBCreditZero 1.
PAGE 220
8 FibreAlliance MIB Overview - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 Figure 8-10 ConnUnitServiceScalars Hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 - connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 - connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 - connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 - connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.
PAGE 221
FibreAlliance MIB Overview 8 Definitions for FCMGMT-MIB The following definitions are used for FCMGMT-MIB. Table 8-1 Definitions for FCMGMT-MIB Type Definition Value Description FcNameId Octet String of size 8 The Port Name for this entry in the SNS table. FcGlobalId Octet String of size 16 An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero.
PAGE 222
8 ConnSet Group ConnSet Group Implementation of the Connectivity group is mandatory for all systems. uNumber 1.3.6.1.3.94.1.1 The number of connectivity units present on this system (represented by this agent). Might be a count of the boards in a chassis or the number of full boxes in a rack. The connectivity unit is mapped to a switch. uNumber is always set to 1. systemURL 1.3.6.1.3.94.1.2 The top-level URL of the system; if it does not exist, the value is an empty string.
PAGE 223
connUnitId 1.3.6.1.3.94.1.6.1.1 8 connUnitId 1.3.6.1.3.94.1.6.1.1 The unique identification for this connectivity unit among those within this proxy domain. The value must be unique within the proxy domain because it is the index variable for connUnitTable. The value assigned to a given connectivity unit should be persistent across agent and unit resets. It should be the same as connUnitGlobalId if connUnitGlobalId is known and stable.
PAGE 224
8 connUnitType 1.3.6.1.3.94.1.6.1.3 The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the remaining lower 8 octets to 0. Example: If Brocade’s switch WWN is 10:0:0:60:69:10:02:18, then use the SNMP GET command on connUnitGlobalId.10.0.0.60.69.10.02.18.0.0.0.0.0.0.0.0 returns: 10 00 00 60 69 10 02 18 00 00 00 00 00 00 00 00 connUnitType 1.3.6.1.3.94.1.6.1.3 The type of this connectivity unit. Set to 4 (switch). connUnitNumports 1.3.6.1.3.94.1.6.1.
PAGE 225
connUnitStatus 1.3.6.1.3.94.1.6.1.6 8 switchState(not ONLINE) 3 (offline, testing, faulty) connUnitStatus 1.3.6.1.3.94.1.6.1.6 Overall status of the connectivity unit. Values Possible values are: • • • • • unknown (1) unused (2) ok (3) warning (4) - Needs attention. failed (5) switchStatus maps directly as follows: connUnitStatus switchStatus 1 (unknown) Unknown 2 (unused) Unmonitored 3 (ok) Healthy/ok 4 (warning) Marginal/Warning 5 (failed) Down/Failed connUnitProduct 1.3.6.1.3.94.1.6.1.
PAGE 226
8 connUnitDomainId 1.3.6.1.3.94.1.6.1.11 “http://{a.b.c.d}” where {a.b.c.d} is the IP address of the switch if Web Tools license is available. “” (null) where “” is the IP address of the switch if Web Tools license is not available. connUnitDomainId 1.3.6.1.3.94.1.6.1.11 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If this value is not applicable, return all bits to 1. Set to the switch domain ID (as per FC-SW). connUnitProxyMaster 1.3.6.1.3.94.
PAGE 227
connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 8 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 The sysuptime time stamp (in centiseconds) at which the last status change occurred for any members of the set; this is the latest time stamp that connUnitStatus or connUnitPortStatus changed. Not supported. connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set.
PAGE 228
8 connUnitControl 1.3.6.1.3.94.1.6.1.22 Set to sysDescr and read-only. connUnitControl 1.3.6.1.3.94.1.6.1.22 Controls the addressed connUnit. Each implementation might choose not to allow any or all of these values on a SET. Cold start and warm start are as defined in MIB-II and are not meant to be a factory reset.
PAGE 229
connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 8 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 Defines the event severity logged by this connectivity unit. All events of severity less than or equal to connUnitEventFilter are logged in connUnitEventTable. Return Always returns value 9 (debug). connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 Number of events currently in connUnitEventTable. Values For Fabric OS v3.0 this value ranges from 0 to 64. For Fabric OS v4.0 this value ranges from 0 to 255. For Fabric OS v4.
PAGE 230
8 connUnitRevsEntry 1.3.6.1.3.94.1.7.1 connUnitRevsEntry 1.3.6.1.3.94.1.7.1 Table of the revisions supported by connectivity units managed by this agent. Index connUnitRevsUnitId connUnitRevsIndex connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 The connUnitId value for the connectivity unit that contains this revision table. connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitId, in the range between 1 and connUnitNumRevs.
PAGE 231
connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 8 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 The connUnitId value of the connectivity unit that contains this sensor table. Set to connUnitId. connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 A unique value among all connUnitSensorEntrys with the same value of connUnitSensorUnitId, in the range between 1 and the return value from connUnitNumSensor. connUnitSensorName 1.3.6.1.3.94.1.8.1.3 A textual identification of the sensor, intended primarily for operator use.
PAGE 232
8 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 The type of component being monitored by this sensor.
PAGE 233
connUnitPortTable 1.3.6.1.3.94.1.10 • • 8 power (9) door (10) Not supported in Fabric OS v2.6.1. connUnitPortTable 1.3.6.1.3.94.1.10 Generic information on ports for a specific connUnit. Note: Information about the GbE ports on a SilkWorm 7500 or FR4-18i blade is not supported. connUnitPortEntry 1.3.6.1.3.94.1.10.1 Each entry contains the information for a specific port. Index connUnitPortUnitId connUnitPortIndex connUnitPortUnitId 1.3.6.1.3.94.1.10.1.
PAGE 234
8 connUnitPortType 1.3.6.1.3.94.1.10.1.3 connUnitPortType 1.3.6.1.3.94.1.10.1.3 The port type. For EX_Port, VEX_Port and VE_Port, the port type will be shown as other. Values Possible values are: • • • • • • • • • • • • • • • • • • • unknown (1) other (2) not-present (3) hub-port (4) n-port (5) End port for fabric. l-port (6) End port for loop. fl-port (7) Public loop. f-port (8) Fabric port. e-port (9) Fabric expansion port. g-port (10) Generic fabric port. domain-ctl (11) Domain controller.
PAGE 235
connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 8 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to 0. This object has the same definition as connUnitPortFCClassCap. For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. connUnitPortState 1.3.6.1.3.94.1.10.1.6 The state of the port hardware.
PAGE 236
8 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 The technology of the port transceiver. Values Possible values are: • • • • • • • • • • • unknown (1) other (2) unused (3) shortwave (4) longwave (5) copper (6) scsi (7) longwaveNoOFC (8) shortwaveNoOFC (9) longwaveLED (10) ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC_Port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper). connUnitPortModuleType 1.3.6.1.3.
PAGE 237
connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 8 Note The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits.
PAGE 238
8 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 • resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific reset operation. Examples of these operations are: • • • • The Link Reset protocol. The Loop Initialization protocol. Resynchronization occurring between the transceiver in the addressed port to the transceiver to which the port is connected.
PAGE 239
connUnitPortName 1.3.6.1.3.94.1.10.1.
PAGE 240
8 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 This OID is depricated. This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object.
PAGE 241
connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 8 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 Not supported in Fabric OS v2.6.1. The node World Wide Name of the port, if applicable; otherwise, an empty string. All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity. All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN.
PAGE 242
8 connUnitEventEntry 1.3.6.1.3.94.1.11.1 connUnitEventEntry 1.3.6.1.3.94.1.11.1 Each entry contains information on a specific event for the given connectivity unit. Index connUnitEventUnitId connUnitEventIndex connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 The connUnitId of the connectivity unit that contains this event table. Same as connUnitId. connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 Each connectivity unit has its own event buffer. As it wraps, it might write over previous events.
PAGE 243
connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 8 Where: DD = day number MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string. connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 This is the sysuptime time stamp when the event occurred. connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 The event severity level.
PAGE 244
8 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 Values Always set to null. connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 The description of the event. Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. For Fabric OS v4.4.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text.
PAGE 245
connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 Index 8 connUnitLinkUnitId connUnitLinkIndex connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 The connUnitId of the connectivity unit that contains this link table. Values Set to WWN of the local switch. connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used.
PAGE 246
8 connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 ISL: WWN of the remote switch. Device: Node name of the device. connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value is nonnegative then it is equal to connUnitPortPhysicalNumber. ISL: Physical port number of the remote port. Device: -1. connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.
PAGE 247
connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 8 Brocade does not support Hubs. Table 8-2 connUnitLinkUnitTypeY End Devices Storage System Storage Sub-system Unknown Other Direct Access Medium Changer Unknown Sequential Access Array Write-Once SES Anything else (printer device, processor device, scanner, and so on) CD-ROM Optical connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 This is the Fibre Channel ID of this port.
PAGE 248
8 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 An entry describing port statistics. Index connUnitPortStatUnitId connUnitPortStatIndex connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 The connUnitId of the connectivity unit that contains this port statistics table. connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 A unique value among all entries in this table, between 0 and connUnitNumPort[connUnitPortUnitId]. connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.
PAGE 249
connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8 8 For Fibre Channel, ordered sets are not included in the count. connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8 The number of transitions in/out of BB credit zero state. The other side is not providing any credit. This is a Fibre Channel statistic only. connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9 Not supported.
PAGE 250
8 connUnitPortStatCountClass1RxFrames 1.3.6.1.3.94.4.5.1.14 The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port. Return Value: 80 0 0 0 0 0 0 0 This is the total for all classes and is a Fibre Channel only statistic. connUnitPortStatCountClass1RxFrames 1.3.6.1.3.94.4.5.1.14 The number of Class 1 Frames received at this port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
PAGE 251
connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20 8 connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20 The number of Class 2 Frames received at this port. This is a Fibre Channel only statistic. connUnitPortStatCountClass2TxFrames 1.3.6.1.3.94.4.5.1.21 Not supported. The number of Class 2 Frames transmitted out this port. Return value: 80 0 0 0 0 0 0 0 This is a Fibre Channel only statistic. connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 Not supported.
PAGE 252
8 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 The number of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected at the destination N_Port. Return value: 80 0 0 0 0 0 0 0 (not supported) This is a Fibre Channel only statistic. connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.5.1.26 The number of Class 3 Frames received at this port. This is a Fibre Channel only statistic.
PAGE 253
connUnitPortStatCountRxLinkResets 1.3.6.1.3.94.4.5.1.33 8 connUnitPortStatCountRxLinkResets 1.3.6.1.3.94.4.5.1.33 The number of link resets. This is the number of LRs received. This is a Fibre Channel only statistic. connUnitPortStatCountTxLinkResets 1.3.6.1.3.94.4.5.1.34 The number of link resets. This is the number LRs transmitted. This is a Fibre Channel only statistic. connUnitPortStatCountNumberLinkResets 1.3.6.1.3.94.4.5.1.35 The number of link resets and LIPs detected at this port.
PAGE 254
8 connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.41 This is a Fibre Channel only statistic. connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.41 The number of invalid transmission words received at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic. connUnitPortStatCountPrimitiveSequenceProtocolErrors 1.3.6.1.3.94.4.5.1.42 The number of primitive sequence protocol errors detected at this port.
PAGE 255
connUnitPortStatCountFramesTruncated 1.3.6.1.3.94.4.5.1.47 8 connUnitPortStatCountFramesTruncated 1.3.6.1.3.94.4.5.1.47 The number of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have been present. This is a Fibre Channel only statistic. connUnitPortStatCountAddressErrors 1.3.6.1.3.94.4.5.1.48 The number of frames received with unknown addressing.
PAGE 256
8 connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 The simple name server (SNS) table for the port represented by connUnitSnsPortIndex. Index connUnitSnsId connUnitSnsPortIndex connUnitSnsPortIdentifier connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 The connUnitId of the connectivity unit that contains this name server table. connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.
PAGE 257
connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 8 connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 The process associator for this entry in the SNS table. connUnitSnsFC4Type 1.3.6.1.3.94.5.2.1.1.9 The FC-4 types supported by this entry in the SNS table. connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 The port type of this entry in the SNS table. connUnitSnsPortIPAddress 1.3.6.1.3.94.5.2.1.1.11 The IPv6 formatted address of this entry in the SNS table. connUnitSnsFabricPortName 1.3.6.1.3.94.5.2.1.1.
PAGE 258
8 trapClientCount 1.3.6.1.3.94.2.2 trapClientCount 1.3.6.1.3.94.2.2 The current number of rows in the trap table. trapRegTable 1.3.6.1.3.94.2.3 A table containing a row for each IP address/port number to which traps are sent. trapRegEntry 1.3.6.1.3.94.2.3.1 IP/port pair for a specific client. Index trapRegIpAddress trapRegPort trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 The IP address of a client registered for traps. trapRegPort 1.3.6.1.3.94.2.3.1.2 The UDP port to send traps to for this host.
PAGE 259
trapRegRowState 1.3.6.1.3.94.2.3.1.4 8 The values 1, 3, 7, and 10 are not valid for SET operations. trapRegRowState 1.3.6.1.3.94.2.3.1.4 Specifies the state of the row. This entry always returns rowActive and allows for read-only. Table 8-4 State TrapRegRowState for Read/Write Description (Read) Description (Write) rowDestroy (1) Read: Can never happen. Write: Remove this row from the table.
PAGE 260
8 Unsupported Tables Unsupported Tables The Connectivity Unit Port Statistics Fabric Table is only supported in v2.6.1 Brocade does not support the following: • • • Connectivity Unit Port Statistics Hub Table Connectivity Unit Port Statistics SCSI Table Connectivity Unit Port Statistics LAN/WAN Table FibreAlliance MIB Traps connUnitStatusChange Enterprise Variables fcmgmt connUnitStatus, connUnitState The overall status of the connectivity unit has changed.
PAGE 261
connUnitSensorStatusChange 8 Recommended severity level (for filtering): info. Sample trap output for Fabric OS v4.4.0: connUnitEventId.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.354 = 354 connUnitEventType.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.354 = other(2) connUnitEventObject.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.354 = null connUnitEventDescr.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.354 = FW-1425 Switch status changed from MARGINAL to HEALTHY. See the swEventTrap for more details.
PAGE 262
8 8-48 connUnitPortStatusChange Fabric OS MIB Reference Publication Number: 53-1000241-01
PAGE 263
Appendix MIB Object Groupings A This appendix provides a function-based listing of MIB objects.
PAGE 264
A Port Variables Port Variables MIB variables that assist in monitoring or modifying ports are in the following tables or groups: Variables for State and Status • • • • • • • “ConnSet Group” on page 8-8 “fcFxPortTable 1.3.6.1.2.1.75.1.1.5” on page 3-11 “Fx_Port Configuration Table” on page 3-34 “fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1” on page 3-13 “Fx_Port Physical Level Table” on page 3-14 “fcFxPortCapTable 1.3.6.1.2.1.75.1.5.
PAGE 265
SNMP Configuration Variables A End Device Variables • • • “connUnitLinkTable 1.3.6.1.3.94.1.12” on page 8-30 “fcFxloginTable 1.3.6.1.2.1.75.1.2.3” on page 3-15 “swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36” on page 5-37 SNMP Configuration Variables MIB variables that assist in configuring SNMP are in the following tables or groups: • • “trapRegTable 1.3.6.1.3.94.2.
PAGE 266
A A-4 SNMP Configuration Variables Fabric OS MIB Reference Publication Number: 53-1000241-01
PAGE 267
Appendix MIB OIDs and Their Matching Object Names B This appendix provides a listing of the v3.1.x MIB object names and the corresponding MIB Object ID (OID) associated with each. MIB OIDs The following matrix allows you to identify a MIB object name according to its related OID. Table 2-1 MIB Object Name/OID Matrix MIB Object Name OID Page No. iso 1 page 3-3 org 1.3 page 3-3 dod 1.3.6 page 3-3 internet 1.3.6.1 page 3-3 directory 1.3.6.1.1 mgmt 1.3.6.1.2 page 3-3 mib-2 1.3.6.1.2.
PAGE 268
B MIB OIDs Table 2-1 B-2 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 page 3-11 fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 page 3-11 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 page 3-11 fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 page 3-11 fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 page 3-11 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 page 3-12 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 page 3-12 fcFxPortFcphVersionLow 1.3.6.1.
PAGE 269
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 page 3-16 fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 page 3-16 fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 page 3-16 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 page 3-16 fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5 page 3-16 fcFxPortIntermixSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.6 page 3-16 fcFxPortStackedConnModeAgreed 1.3.6.1.
PAGE 270
B MIB OIDs Table 2-1 B-4 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 page 3-20 fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 page 3-20 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 page 3-20 fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 page 3-20 fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 page 3-20 fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9 page 3-20 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.
PAGE 271
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 page 3-24 fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 page 3-24 fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10 page 3-24 fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11 page 3-24 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 page 3-24 fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 page 3-24 fcFeMIBConformance 1.3.6.1.2.1.75.
PAGE 272
B MIB OIDs Table 2-1 B-6 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 page 3-34 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 page 3-34 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 page 3-34 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 page 3-34 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 page 3-35 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 page 3-35 fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 page 3-35 fcFxPortFcphVersionHigh 1.3.
PAGE 273
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 page 3-38 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 page 3-39 fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 page 3-39 fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 page 3-39 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 page 3-39 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 page 3-39 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.
PAGE 274
B MIB OIDs Table 2-1 B-8 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 page 3-43 fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 page 3-43 fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 page 3-43 fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.9 page 3-43 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 page 3-44 fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 page 3-44 fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.
PAGE 275
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. systemURL 1.3.6.1.3.94.1.2 page 8-8 connUnitTable 1.3.6.1.3.94.1.6 page 8-8 connUnitEntry 1.3.6.1.3.94.1.6.1 page 8-8 connUnitId 1.3.6.1.3.94.1.6.1.1 page 8-9 connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 page 8-9 connUnitType 1.3.6.1.3.94.1.6.1.3 page 8-10 connUnitNumports 1.3.6.1.3.94.1.6.1.4 page 8-10 connUnitState 1.3.6.1.3.94.1.6.1.5 page 8-10 connUnitStatus 1.3.6.1.3.94.1.6.1.
PAGE 276
B MIB OIDs Table 2-1 B-10 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 page 8-16 connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 page 8-16 connUnitRevsRevId 1.3.6.1.3.94.1.7.1.3 page 8-16 connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 page 8-16 connUnitSensorTable 1.3.6.1.3.94.1.8 page 8-16 connUnitSensorEntry 1.3.6.1.3.94.1.8.1 page 8-16 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 page 8-17 connUnitSensorIndex 1.3.6.1.3.94.1.8.
PAGE 277
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 page 8-25 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 page 8-26 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 page 8-26 connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 page 8-26 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 page 8-27 connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 page 8-27 connUnitEventTable 1.3.6.1.3.94.1.
PAGE 278
B MIB OIDs Table 2-1 B-12 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. trapReg 1.3.6.1.3.94.2 page 8-44 trapMaxClients 1.3.6.1.3.94.2.1 page 8-43 trapClientCount 1.3.6.1.3.94.2.2 page 8-44 trapRegTable 1.3.6.1.3.94.2.3 page 8-44 trapRegEntry 1.3.6.1.3.94.2.3.1 page 8-44 trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 page 8-44 trapRegPort 1.3.6.1.3.94.2.3.1.2 page 8-44 trapRegFilter 1.3.6.1.3.94.2.3.1.3 page 8-44 trapRegRowState 1.3.6.1.3.94.2.3.1.
PAGE 279
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitPortStatCountClass2TxFrames 1.3.6.1.3.94.4.5.1.21 page 8-37 connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 page 8-37 connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 page 8-37 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 page 8-37 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 page 8-38 connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.
PAGE 280
B MIB OIDs Table 2-1 B-14 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitServiceScalars 1.3.6.1.3.94.5.1 page 8-41 connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 page 8-41 connUnitServiceTables 1.3.6.1.3.94.5.2 page 8-41 connUnitSnsTable 1.3.6.1.3.94.5.2.1 page 8-41 connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 page 8-42 connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 page 8-42 connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 page 8-42 connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.
PAGE 281
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 page 5-20 swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 page 5-20 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 page 5-20 swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 page 5-21 swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 page 5-21 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 page 5-21 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.
PAGE 282
B MIB OIDs Table 2-1 B-16 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 page 5-28 swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.6 page 5-28 swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.7 page 5-28 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8 page 5-28 swModule 1.3.6.1.4.1.1588.2.1.1.1.3 page 5-30 swAgtCfg 1.3.6.1.4.1.1588.2.1.1.1.4 page 5-30 swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.
PAGE 283
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 page 5-35 swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 page 5-35 swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 page 5-35 swFCPortRxBadEofs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 page 5-35 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 page 5-36 swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 page 5-36 swFCPortC3Discards 1.3.6.1.
PAGE 284
B MIB OIDs Table 2-1 B-18 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 page 5-39 swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 page 5-39 swEvent 1.3.6.1.4.1.1588.2.1.1.1.8 page 5-40 swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 page 5-40 swEventNumEntries 1.3.6.1.4.1.1588.2.1.1.1.8.4 page 5-40 swEventTable 1.3.6.1.4.1.1588.2.1.1.1.8.5 page 5-40 swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 page 5-40 swEventIndex 1.
PAGE 285
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 page 5-45 swFwDefaultInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 page 5-45 swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 page 5-45 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 page 5-45 swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 page 5-45 swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
PAGE 286
B MIB OIDs Table 2-1 B-20 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 page 5-51 swBlmPerfMnt 1.3.6.1.4.1.1588.2.1.1.1.23 page 5-53 swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 page 5-53 swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 page 5-53 swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 page 5-53 swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2 page 5-53 swBlmPerfAlpa 1.3.6.1.4.
PAGE 287
MIB OIDs Table 2-1 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFabricMemEIP 1.3.6.1.1.1588.2.1.1.1.2.10.1.4 page 5-29 swFabricMemFCIP 1.3.6.1.1.1588.2.1.1.1.2.10.1.5 page 5-29 swFabricMemGWIP 1.3.6.1.1.1588.2.1.1.1.2.10.1.6 page 5-29 swFabricMemType 1.3.6.1.1.1588.2.1.1.1.2.10.1.7 page 5-29 swFabricMemShortVersion 1.3.6.1.1.1588.2.1.1.1.2.10.1.8 page 5-29 swIDIDMode 1.3.6.1.1.1588.2.1.1.1.2.11 page 5-30 swFCPortName 1.3.6.1.4.1588.2.1.1.1.6.2.1.
PAGE 288
B MIB OIDs Table 2-1 B-22 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 page 5-57 sw28k 1.3.6.1.4.1.1588.2.1.1.2 page 5-2 sw21kN24k 1.3.6.1.4.1.1588.2.1.1.3 page 5-2 sw20x0 1.3.6.1.4.1.1588.2.1.1.
PAGE 289
Index A definitions for Fibre-Channel-fe-MIB 3-19, 3-44 address translation group 2-15 agtcfgDefault command 1-9 agtcfgSet command 1-9 agtcfgShow command 1-9 E 3-6 disabling MIBs 1-4 accounting group ASIC performance monitoring group EGP group 5-53 2-31 end device group 5-50 Entity MIB conformance information Entity MIB objects 4-6 4-1 B Entity MIB overview 1-6 Brocade MIB files 1-6 Entity MIB trap Entity MIB system organization of MIB objects 4-2 before loading MIBs 4-18 error group 3
PAGE 290
FOS commands 1-8 FX_Port fabric login table 3-15, 3-40 O objects and types imported 2-8 operation group H 6-1 ha MIB overview 3-37 P ha-MIB traps 6-8 ha-MIB traps and sample triggers 6-10 port variables 6-3 high-availability group physical entity group 4-6 A-2 I R 2-23 interfaces group 2-11 interfaces table 2-11 IP group 2-16 revision number scalar ICMP group 8-45 S ISL and end device variables A-2 sensor variables A-1 1-8 Series 3000 Variables A-3 service group 8-41 sensorShow comman
PAGE 291
T U TCP connection table 2-27 UDP group TCP group 2-26 2-8, 4-4, 7-4 textual conventions for sw-MIB 5-9 transmission group 2-31 traps 1-4 trunking group 5-55 textual conventions Fabric OS MIB Reference Publication Number: 53-1000241-01 2-30 understanding MIBs 1-2 understanding SNMP bASICs 1-1 8-46 8-46 unsupported tables unsupported traps Index-3
PAGE 292
Index-4 Fabric OS MIB Reference Publication Number: 53-1000241-01