Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

5-20 Fabric OS MIB Reference

Publication Number: 53-1000241-01

swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6

The current version of the firmware.

The return value is displayed using the following format:

vM.m.f

Where:

v = deployment indicator

M = major version

m = minor version

f = software maintenance version

For example, v5.2.0_main_bld36 described firmware version 5.2.0 and the specific build number 36.

Some versions may not have a build number and will appear as the version. An example might be v5.2.0

indicates FOS version 5.2.0.

swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7

The current operational status of the switch.

Values Possible values are:

• online (1) The switch is accessible by an external Fibre Channel port.

• offline (2) The switch is not accessible.

• testing (3) The switch is in a built-in test mode and is not accessible by an external Fibre Channel

port.

• faulty (4) The switch is not operational.

swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8

The desired administrative status of the switch. A management station might place the switch in a

desired state by setting this object accordingly.

Values Possible values are:

• online (1) Set the switch to be accessible by an external FC port.

• offline (2) Set the switch to be inaccessible.

• testing (3) Set the switch to run the built-in test.

• faulty (4) Set the switch to a “soft” faulty condition.

• reboot (5) Set the chassis to reboot in 1 second.

• fastboot (6) Set the chassis to fastboot in 1 second. Fastboot causes the chassis to boot but omit the

POST.

• switchReboot (7) Set the current switch to reboot in 1 second.

When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot/switchReboot.

For the SilkWorm 3250, 3850, 3900, 24000, and 48000 the testing (3), faulty (4) values are not

applicable.