Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

Fabric OS MIB Reference 5-31

Publication Number: 53-1000241-01

swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3

You can change the community setting using the agtCfgSet command.

swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3

This is the trap recipient associated with the community. If a new value is set successfully, it takes effect

immediately.

If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent

for the associated community string.

With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community

string.

Any or all of the trap recipients can be configured to send a trap for the associated community string.

The maximum number of trap recipients that can be configured is six. If no trap recipient is configured,

no traps are sent.

The trap recipient IP address should be part of the Access Control List for Fabric OS v2.6.1, v3.1, and

v4.x (See the Fabric OS Command Reference and the snmpConfig command for more information).

swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4

This is the trap severity level associated with swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3. The trap

severity level, is in conjunction with the event’s severity level. When an event occurs, and if its severity

level is at or below the set value, the SNMP trap is sent to configure trap recipients. The severity level is

limited to particular events. If a new value is set successfully, it takes effect immediately.

This object obsoletes swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1.

Fibre Channel Port Group

This group contains information about the physical state, operational status, performance, and error

statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre

Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port.

swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1

The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port, and

any other types of Fibre Channel port.

Values The valid values are as follows:

SilkWorm 3200, 3250 8 ports

SilkWorm 4012 12 ports

SilkWorm 200E, 3800, 3850 16 ports

SilkWorm 3900, 4100 32 ports

SilkWorm 4900 64 ports

SilkWorm 7500 32 ports