Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

Fabric OS MIB Reference 8-23
Publication Number: 53-1000241-01
connUnitPortFCId 1.3.6.1.3.94.1.10.1.11
8
N
ote
The internal port number is 1 less than the port index. For example, if the switch has WWN
10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and
20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN
10:00:00:60:69:10:02:18, the same as the switch.
connUnitPortFCId 1.3.6.1.3.94.1.10.1.11
This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24
bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains only the
domain ID, left justified, 0 filled. If this port does not have a Fibre Channel address, return all bits set to
1.
For an F_Port, this is the Fibre Channel ID to which the connected N_port is assigned. For an FL_Port,
this is the Fibre Channel ID of the FL_Port (alpa = 0). For a U or E_Port, this is similar to F_Port.
connUnitPortSn 1.3.6.1.3.94.1.10.1.12
The serial number of the unit (for example, for a GBIC). If this is not applicable, return an empty string.
If the GBIC has a serial ID, the return value is the GBIC part number; otherwise, the return value is
Null.
connUnitPortRevision 1.3.6.1.3.94.1.10.1.13
The port revision (for example, GBIC).
Return If the GBIC has a serial ID, this returns the GBIC revision number; otherwise, it returns a Null value.
connUnitPortVendor 1.3.6.1.3.94.1.10.1.14
The port vendor (for example, for a GBIC).
Return If the GBIC has a serial ID, this returns the GBIC vendor name; otherwise, it returns a Null value.
connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15
The speed of the port, in kilobytes per second.
For example, the valid values for SilkWorm 12000, 24000, and 48000 directors: 125,000 KBps,
250,000 KBps, or 500,000 KBps depending on the configuration.
connUnitPortControl 1.3.6.1.3.94.1.10.1.16
Controls the addressed connUnit’s port.
Valid commands are: