Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

8-24 Fabric OS MIB Reference
Publication Number: 53-1000241-01
connUnitPortControl 1.3.6.1.3.94.1.10.1.16
8
• resetConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the addressed port
performs a vendor-specific reset operation.
Examples of these operations are:
• The Link Reset protocol.
• The Loop Initialization protocol.
• Resynchronization occurring between the transceiver in the addressed port to the transceiver to
which the port is connected.
• bypassConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the addressed port
performs a vendor-specific “bypass” operation.
Examples of these operations are:
• Transitioning from online to offline.
• A request (NON-PARTICIPATING) command to the loop port state machine.
• Removal of the port from an arbitrated loop by a hub.
• unbypassConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the addressed port
performs a vendor-specific “unbypass” operation. Examples of these operations are
• The Link Failure protocol.
• A request (PARTICIPATING) command to the loop port state machine.
• Addition of the port to an arbitrated loop by a hub.
• offlineConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the addressed port
performs a vendor-specific offline operation.
Examples of these operations are:
• Disabling a port's transceiver.
• The Link Failure protocol.
• Request (NON-PARTICIPATING) command to the loop port state machine removal of the port
from an arbitrated loop by a hub.
• onlineConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the addressed port
performs a vendor-specific online operation.
Examples of these operations are:
• Enabling a port's transceiver.
• The Link Failure protocol, request (PARTICIPATING) command to the loop port state
machine.
• Addition of the port from an arbitrated loop by a hub.
Each implementation might choose not to allow any or all of these values on a SET.