Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

Fabric OS MIB Reference 8-25

Publication Number: 53-1000241-01

connUnitPortName 1.3.6.1.3.94.1.10.1.17

If the management station uses in-band communication (FC-IP) with the switch, either of the

two following actions might result in a loss of in-band communication with the switch:

• Disabling the FC port that is connected to the management station

• Disabling the embedded port

• Return values are:

- resetConnUnitPort portDisable (F or E_Port, loop for U_Port)

- bypassConnUnitPort portDisable (FL_Port)

- unbypassConnUnitPort portEnable (FL_Port)

- offlineConnUnitPort portDisable (E, F, FL_Port)

- onlineConnUnitPort portEnable (U)

- resetConnUnitPortCounters clear the port statistics counter. When rebooted, this

defaults to 1 (unknown).

connUnitPortName 1.3.6.1.3.94.1.10.1.17

A string describing the addressed port.

This object is read-only for Brocade switches.

connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18

This is the internal port number by which this port is known. In many implementations, this should be

the same as connUnitPortIndex. Some implementations might have an internal port representation not

compatible with the rules for table indices. In these cases, provide the internal representation of this port

in this object. This value might also be used in the connUnitLinkPortNumberX or

connUnitLinkPortNumberY objects of the connUnitLinkTable.

The internal port numbers for Brocade switch. The SilkWorm switches support 0 through maximum

number of ports.

The maximum number of supported ports are as follows:

SilkWorm 3200, 3250 8 ports

SilkWorm 4012 12 ports

SilkWorm 200E, 3800, 3850 16 ports

SilkWorm 3900, 4100 32 ports

SilkWorm 4900 64 ports

SilkWorm 7500 32 ports

SilkWorm 12000 128 ports

SilkWorm 24000 128 ports

SilkWorm 48000 256 ports