Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

3-24 Fabric OS MIB Reference

Publication Number: 53-1000241-01

fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8

A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3

frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1

service.

fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9

A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting.

fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10

A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery.

fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11

A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery.

fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12

The maximum holding time (in microseconds) that the Fx_Port is capable of supporting.

fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13

The minimum holding time (in microseconds) that the Fx_Port is capable of supporting.

FCFABRIC-ELEMENT-MIB (Experimental Branch)

This section contains descriptions and other information that is specific to FCFABRIC-ELEMENT-MIB

(in the experimental branch), including the following:

• “FCFABRIC-ELEMENT-MIB Organization” on page 3-26

• “Definitions for FCFABRIC-ELEMENT-MIB” on page 3-30

• “fcFeConfig Group” on page 3-32

• “fcFeOp Group” on page 3-37

• “fcFeError Group” on page 3-42

• “fcFeAcct Group” on page 3-44

ote

The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS v2.6.x and v3.0.x.