53-1002151-01 29 April 2011 Fabric OS MIB Reference Supporting Fabric OS v7.0.
Copyright © 2000-2011 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, BigIron, DCFM, DCX, Fabric OS, FastIron, IronView, NetIron, SAN Health, ServerIron, TurboIron, and Wingspan are registered trademarks, and Brocade Assurance, Brocade NET Health, Brocade One, Extraordinary Networks, MyBrocade, VCS, and VDX are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries.
Document Title Publication Number Summary of Changes Publication Date Brocade Fabric OS MIB Reference Manual 53-0000521-08 Updated to support the Brocade 4100. September 2004 Brocade Fabric OS MIB Reference Manual 53-0000521-09 Updated to support the Brocade 48000 and 200E. April 2005 Brocade Fabric OS MIB Reference Manual 53-1000045-01 Updated to support the Brocade 4900, 7500, and FR4-18i blade.
iv Fabric OS MIB Reference 53-1002151-01
Contents About This Document In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xiv What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 MIB-II (RFC1213-MIB) In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 MIB II overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 MIB-II object hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Textual conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Objects and types imported . . . . . . . . . . . . . . . . . . . . . . . . . . . .
fcFeStatus group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 fcFeError group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 fcFeAccounting group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 fcFeCapabilities group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 FCFABRIC-ELEMENT-MIB (experimental branch) . . . . . . . . . . . . . . . 85 FCFABRIC-ELEMENT-MIB organization .
Fabric Watch group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 End device group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 Switch group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Bloom performance monitor group . . . . . . . . . . . . . . . . . . . . . . . . .167 Trunking group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 Toptalker group . . . . . .
Unsupported tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228 FibreAlliance MIB traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229 Chapter 10 FibreAlliance Extension MIB Objects In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231 FibreAlliance extension MIB overview . . . . . . . . . . . . . . . . . . . . . . .231 Textual conventions for FA-EXT-MIB . . . . . . . . . . . . . . . . . . . . .
Chapter 14 USM MIB Objects In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261 USM MIB objects overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261 USM statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262 USM user group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263 Chapter 15 IEEE 802.1x PAE MIB Objects In this chapter . . . . . . . . . . . . . . . .
Bridge-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Bridge-MIB traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 dot1d base group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 dot1d STP group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311 dot1dTp group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 dot1d static group . . . . . . . . .
portShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Document In this chapter • • • • • • • • How this document is organized . . . . . . . . . . . . . . . . xiii Supported hardware and software . . . . . . . . . . . . . . xiv What’s new in this document. . . . . . . . . . . . . . . . . . . xvi Document conventions. . . . . . . . . . . . . . . . . . . . . . . . xvii Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . xviii Additional information . . . . . . . . . . . . . . . . . . . . . . . . xix Getting technical help. . . . .
Supported hardware and software • Chapter 15, “IEEE 802.1x PAE MIB Objects,” provides information on IEEE 802.1x PAE MIB object types. • Chapter 16, “LLDP MIB Objects,” provides information on LLDP MIB object types. • Chapter 17, “IEEE 802.3 LAG MIB Objects,” provides information on IEEE 802.3 LAG MIB object types. • • • • Chapter 18, “Bridge-MIB Objects,” provides information on Bridge-MIB object types. Chapter 19, “BD MIB Objects,” provides information on BD MIB object types.
Supported hardware and software - FA4-18 Fibre Channel application blade FCOE10-24 DCX Blade FS8-18 Encryption Blade FC8-16 port blade FC8-32 port blade FC8-48 port blade FC8-64 port blade FC10-6 port blade FR4-18i router blade FX8-24 DCX Extension Blade • Brocade 48000 director - FA4-18 Fibre Channel application blade - FC4-16 port blade - FC4-16IP blade - FC4-32 port blade - FC4-48 port blade - FC8-16 port blade - FC8-32 port blade - FC8-48 port blade - FC10-6 port blade - FR4-18i router blade • Brocad
What’s new in this document The following blades are not supported in any chassis operating with Fabric OS v7.0.
Document conventions • Information that was changed: - fcfxPortBbCreditAvailable of fcfxPortStatusTable - swFwClassAreaIndex - swNbBaudRate - ifSpeed - connUnitPortSpeed - ifHighSpeed - dot1dStaticAllowedToGoTo - swBlmPerfFltMntTable - swFwLastEvent - interfaces group &if-MIB: - ifInOctet - ifHCInOctets - ifOutOctets - ifHCOutOctets - Change of version number wherever applicable For further information about new features and documentation updates for this release, refer to the release notes.
Notice to the reader Notes, cautions, and warnings The following notices and statements are used in this manual. They are listed below in order of increasing severity of potential hazards. NOTE A note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information. ATTENTION An Attention statement indicates potential damage to hardware or data.
Additional information Additional information This section lists additional Brocade and industry-specific documentation that you might find helpful. Brocade resources To get up-to-the-minute information, go to http://my.brocade.com and register at no cost for a user ID and password. White papers, online demonstrations, and data sheets are available through the Brocade website at: http://www.brocade.com/products-solutions/products/index.
Document feedback • Serial console and Telnet session logs • syslog message logs 2.
Chapter Understanding Brocade SNMP 1 In this chapter • Setting the SNMP security level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Understanding SNMP basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Loading Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 • Access Gateway and Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Understanding SNMP basics Table 1 shows the security level options. TABLE 1 Security level options Security level Protocol Query behavior Traps No security [0] (noAuthnoPriv) SNMPv1 SNMPv3 Allowed. Allowed. Sent. Sent. Authentication only [1] (authNoPriv) SNMPv1 SNMPv3 Allowed. All SNMPv3 users allowed except noAuthNoPriv users. Sent. Sent for all SNMPv3 users except noAuthNoPriv users. Authentication and Privacy [2] (authPriv) SNMPv1 SNMPv3 Not allowed.
Understanding SNMP basics 1 The agent can receive queries from one or more management stations and can send traps to up to six management stations. Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy.
1 Understanding SNMP basics Use a MIB browser to access the MIB variables: all MIB browsers perform queries and load MIBs. Since different vendors vary the information in their private enterprise MIBs, it is necessary to verify their information. The Fibre Channel MIB standards dictate that certain information be included in all MIBs: it is the vendors’ responsibility to follow the standards. The standards are as follows: • FibreAlliance (FA) MIB: Brocade supports v4.4. and later releases.
Understanding SNMP basics 1 FA traps Consider enabling the FA traps if you want to use SNMP to monitor multiple connectivity units, including Brocade switches. The switchStatusPolicySet command determines the FA-TRAP switch status-related outputs: • connUnitStatusChange This trap is generated by Fabric watch such that only the swUnitsStatusChange is controlled by switchStatusPolicySet command. • connUnitSensorStatusChange This trap is generated by any sensor event.
1 Understanding SNMP basics 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to the system error log. The desired severity level is introduced to filter a swEvent trap based on the severity level. 5. swFabricWatchTrap This trap is generated when any Fabric Watch threshold is reached. The desired severity level is introduced to filter a swFabricWatchTrap based on the severity level. 6.
Loading Brocade MIBs 1 Object instances MIB objects are defined by the OID, which is the type of object, and by the instance number, which is an instance of that MIB object. A Fibre Channel port is a MIB object, and port 0 is an instance of that object. The following is an OID number and an instance number: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.5 where: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 is the OID (of swFCPortTxWords) and 5 is the instance ID for port 4.
1 Loading Brocade MIBs Standard MIBs Distribution of standard MIBs has been stopped from Fabric OS v6.4.0. Download the following MIBs from the http://www.oidview.com/ website: • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 SNMP-FRAMEWORK-MIB IF-MIB IANAifType-MIB INET-ADDRESS-MIB RFC1213-MIB SNMPv2-MIB ENTITY-MIB RMON-MIB FC-MGMT-MIB FCIP-MGMT-MIB ISCSI-MIB FIBRE-CHANNEL-FE-MIB SNMPv2-PARTY-MIB SNMPv2-SMI-MIB SNMP-VIEW-BASED-ACM-MIB SNMP-USER-BASED-SM-MIB SNMP-TARGET-MIB IEEE 802.
Loading Brocade MIBs 1 Before loading MIBs Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (Table 2). TABLE 2 Fabric OS-supported SNMP versions Firmware SNMPv1 SNMPv2 1 SNMPv3 Yes2 Fabric OS v5.x Yes Yes Fabric OS v6.0.0 Yes Yes Yes Fabric OS v6.1.0 Yes Yes Yes Fabric OS v6.2.0 Yes Yes Yes Fabric OS v6.1.2_CEE Yes No Yes Fabric OS v6.3.0 Yes No Yes Fabric OS v6.4.0 Yes No Yes Fabric OS v6.4.
1 Loading Brocade MIBs Select one FICON_v5_0.mib FICON.MIB FOS 6.0 BRCD.mib Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x, 6.x RFC1155-SMI Brocade_RE.MIB FOS 6.4, 7.0 FICON.mib FOS 7.0 BD.mib FOS 6.4, 7.0 Brocade_TC.mib FOS 6.4, 7.0 Select one FA_v2_2.mib FCMGMT-MIB FOS 2.6.x RFC2571 SNMP-FRAMEWORKMIB FA.mib FCMGMT-MIB FOS 3.x, 4.x, 5.x, 6.x FE_RFC2837.mib FIBRE-CHANNEL-FE-MIB FOS 3.1.x, 4.x, 5.x, 6.x, 7.0 ENTITY_RFC2737.mib ENTITY-MIB SW_v5_5.mib FOS 2.6.x, 3.x, 4.x, 5.x SW_v5_7.
Loading Brocade MIBs 1 NOTE FA.mib obsoletes the use of the connUnitPortStatFabricTable and now uses the connUnitPortStatTable for port statistics. All versions of Fabric OS support SNMPv1. Fabric OS v5.0.1 supports the SNMPv3-USM (snmpUsmMIB) MIB. Fabric OS v5.3.0 supports the FCIP MIB and ifXtable. SNMP CLI usage The examples for configuring SNMPv3 users/traps are listed in the following section. Configuring SNMPv3 user/traps 1.
1 Loading Brocade MIBs Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser1] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser2] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser3] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..
Loading Brocade MIBs 1 Priv Protocol: noPriv Engine ID: 00:00:00:00:00:00:00:00:00 SNMPv3 Trap configuration: Trap Entry 1: 10.35.52.33 Trap Port: 162 Trap User: snmpadmin1 Trap recipient Severity level: 4 Trap Entry 2: 10.35.52.
1 Loading Brocade MIBs Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] fe80::224:1dff:fef6:3f98 UserIndex: (1..6) [2] Trap recipient Severity level : (0..5) [0] 2 Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] HCL0389U.corp.brocade.com UserIndex: (1..6) [3] Trap recipient Severity level : (0..5) [0] 5 Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.
Loading Brocade MIBs 1 To display the traps and MIBs supported in Fabric OS: switch:root> snmpTraps --show # |Mib Name |Supported Traps ---|----------------|-------------------------------001|SW-MIB |sw-track-changes-trap | |sw-fabric-watch-trap | |sw-fc-port-scn | |ip-v6-change-trap | |sw-pmgr-event-trap | |sw-event-trap | |sw-fabric-reconfig-trap | |sw-fabric-reconfig-trap | |sw-state-trap | |sw-move-port-trap | |sw-brcd-genric-trap 002|FICON-MIB |link-rnid-device-registration | |link-rnid-device-deregi
1 Loading Brocade MIBs To block port traps on slot 1 and port 10: Switch:admin> snmptraps -block -port 1/10 Example of accessControl configuration: switch:admin> snmpconfig --set accessControl SNMP access list configuration: Access host subnet area in dot notation: [0.0.0.0] 192.168.0.0 Read/Write? (true, t, false, f): [true] Access host subnet area in dot notation: [0.0.0.0] 10.32.148.0 Read/Write? (true, t, false, f): [true] f Access host subnet area in dot notation: [0.0.0.
Loading Brocade MIBs 1 swFault: NO swSensorScn: NO swFCPortScn: NO swEventTrap: YES DesiredSeverity:None swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: NO swIPv6ChangeTrap: NO swPmgrEventTrap: NO swFabricReconfigTrap: NO swFabricSegmentTrap: NO swExtTrap: NO [...] To re-enable all traps under the SW-MIB category after they were disabled: switch:admin> snmpconfig --set mibCapability -mib_name SW-MIB -bitmask 0xFFF Operation succeeded switch:admin> snmpconfig --show mibCapability [...
1 Loading Brocade MIBs swFabricReconfigTrap: YES swFabricSegmentTrap: YES swExtTrap: YES FA-TRAP: YES connUnitStatusChange: YES connUnitDeletedTrap: YES connUnitEventTrap: YES connUnitSensorStatusChange: YES connUnitPortStatusChange: YES FICON-TRAP: YES linkRNIDDeviceRegistration: YES linkRNIDDeviceDeRegistration: YES linkLIRRListenerAdded: YES linkLIRRListenerRemoved: YES linkRLIRFailureIncident: YES HA-TRAP: YES fruStatusChanged: YES cpStatusChanged: YES fruHistoryTrap: YES ISCSI-TRAP: YES iscsiTgtLogin
Access Gateway and Brocade MIBs 1 To set the security level to default: DCX_128:FID128:admin> snmpconfig --default seclevel GET security level = 0, SET level = 0 SNMP GET Security Level: No security SNMP SET Security Level: No security SNMP GET Security Level will be set to 'No Security' SNMP SET Security Level will be set to 'No Security' Do you want to continue? (yes, y, no, n): [no] y DCX_128:FID128:admin> DCX_128:FID128:admin> snmpconfig --show seclevel GET security level = 0, SET level = 0 SNMP GET S
1 Firmware upgrades and enabled traps TABLE 3 Access Gateway MIB support (Continued) MIB name Supported Description iSCSI MIB No Disabled in Access Gateway because the conventions are specific to fabric switches. IF-MIB Yes Supported in Access Gateway. BD-MIB Yes Supported for F-ports. IEEE 802.3 LAG MIB No Supported in Access Gateway. IEEE 802.1x PAE MIB No Supported in Access Gateway. LLDP MIB No Supported in Access Gateway. BRIDGE-MIB No Supported in Access Gateway.
Fabric OS commands for configuring SNMP TABLE 5 1 Detailed description of the commands Command Operands Arguments snmpConfig --show | --set | --default | --enable | --disable [snmpv1 | snmpv3 | accessControl | mibCapability | systemGroup | seclevel] --show Displays the SNMP agent configuration data of the specified category. snmpv1 Selects SNMPv1-related configuration parameters.
1 Fabric OS commands for configuring SNMP TABLE 5 Detailed description of the commands (Continued) Command Operands Arguments snmpConfig --set mibCapability [-mib_name [ -bitmask ]] --set mibCapability Configures MIBs interactively. When used without a MIB name, this command displays a menu with supported MIBs and associated traps, and for each MIB or trap, you are prompted to confirm or change the default by specifying yes or no.
Support for Administrative Domains TABLE 5 1 Detailed description of the commands (Continued) Command Operands snmptraps --show [port] --show Displays all configured SNMP traps and MIBs supported in Fabric OS. This also shows the blocked ports trap status on all the ports. port Shows only those ports which have blocked traps. snmptraps --block | --unblock [-port | ALL] --block Blocks port traps on a port. NOTE: This command is not supported for linkDown and linkup traps.
1 24 Support for Virtual Fabric Fabric OS MIB Reference 53-1002151-01
Chapter 2 MIB-II (RFC1213-MIB) In this chapter • MIB II overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • System group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Interfaces group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • AT group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 MIB II overview MIB-II object hierarchy Figure 6 through Figure 16 depict the organization and structure of MIB-II. - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - rmon - iFMIB FIGURE 6 MIB-II overall hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.
MIB II overview 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress 1.3.6.1.2.1.2.2.1.6 - ifAdminStatus 1.3.6.1.2.1.2.2.1.7 - ifOperStatus 1.3.6.1.2.1.2.2.1.8 - ifLastChange 1.3.6.1.2.1.2.2.1.9 - ifInOctets 1.3.6.1.2.1.2.2.1.10 - ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 - ifInNUcastPkts 1.3.
2 MIB II overview - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - ipInDelivers 1.3.6.1.2.1.4.9 - ipOutRequests 1.3.6.1.2.1.4.10 - ipOutDiscards 1.3.6.1.2.1.4.11 - ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.14 - ipReasmOKs 1.
MIB II overview - FIGURE 10 2 ipAddressType 1.3.6.1.2.1.4.34.1.4 ipAddressPrefix 1.3.6.1.2.1.4.34.1.5 ipAddressOrigin 1.3.6.1.2.1.4.34.1.6 ipAddressStatus 1.3.6.1.2.1.4.34.1.7 ipAddressCreated 1.3.6.1.2.1.4.34.1.8 ipAddressLastChanged 1.3.6.1.2.1.4.34.1.9 ipAddressRowStatus 1.3.6.1.2.1.4.34.1.10 ipAddressStorageType 1.3.6.1.2.1.4.34.1.11 IP hierarchy - icmp (1.3.6.1.2.1.5) - icmpInMsgs 1.3.6.1.2.1.5.1 - icmpInErrors 1.3.6.1.2.1.5.2 - icmpInDestUnreachs 1.3.6.1.2.1.5.3 - icmpInTimeExcds 1.3.6.1.2.1.5.
2 MIB II overview - tcp - (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 - tcpConnEntry 1.3.6.1.2.1.6.13.1 - tcpConnState 1.3.6.1.2.1.6.13.1.
MIB II overview 2 - egp - (1.3.6.1.2.1.8) egpInMsgs egpInErrors egpOutMsgs egpOutErrors egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode - egpNeighEventTrigger - egpAs FIGURE 14 EGP hierarchy - snmp (1.3.6.1.2.1.11) - snmpInPkts 1.3.6.1.2.1.11.1 - snmpOutPkts 1.3.6.1.
2 MIB II overview - ifMIB (1.3.6.1.2.1.31) - ifXTable 1.3.6.1.2.1.31.1.1 - ifXentry 1.3.6.1.2.1.31.1.1.1 - ifName 1.3.6.1.2.1.31.1.1.1.1 - ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 - ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 - ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 - ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 - ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 - ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 - ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 - ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 - ifHCOutOctets 1.3.6.1.2.1.
System group 2 System group All systems must implement the System group. If an agent is not configured to have a value for any of the System group variables, a string of length 0 is returned. Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description sysDescr 1.3.6.1.2.1.1.1 Read only A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software.
2 Interfaces group Object and OID Access Description sysLocation 1.3.6.1.2.1.1.6 Read-write The physical location of this node (for example, telephone closet, 3rd floor). The minimum length of the string must be four. The default is End User Premise. Set this value using the snmpconfig command. sysServices 1.3.6.1.2.1.1.7 Read only A value that indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value 0.
Interfaces group Fabric OS MIB Reference 53-1002151-01 2 Object and OID Access Description ifIndex 1.3.6.1.2.1.2.2.1.1 Read only A unique value for each interface. The values range between 1 and the value of ifNumber. The value for each interface must remain constant, at least from one re-initialization of the entity's network management system to the next re-initialization. For Network Interface, the number starts from 805306369 and increments with the interface count.
2 Interfaces group Object and OID Access Description ifPhysAddress 1.3.6.1.2.1.2.2.1.6 Read only The interface's address at the protocol layer immediately below the network layer in the protocol stack. For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length. • eth0 returns the MAC address for GbE ports • lo returns null • SNMP represents the FC port ID in ASCII hex represenation.
Interfaces group 2 Object and OID Access Description ifInErrors 1.3.6.1.2.1.2.2.1.14 Read only The number of inbound packets that contained errors, which thereby prevented them from being deliverable to a higher-layer protocol. ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 Read only The number of packets received by way of the interface that were discarded because of an unknown or unsupported protocol. NOTE: This object is not supported. ifOutOctets 1.3.6.1.2.1.2.2.1.
2 AT group AT group Implementation of the Address Translation group is mandatory for all systems. Note, however, that this group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address translation tables. Object and OID Access Description atTable 1.3.6.1.2.1.3.
IP group 2 Object and OID Access Description ipInHdrErrors 1.3.6.1.2.1.4.4 Read only The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on. ipInAddrErrors 1.3.6.1.2.1.4.
2 IP group Object and OID Access Description ipReasmFails 1.3.6.1.2.1.4.16 Read only The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, and so on). NOTE: This is not necessarily a count of discarded IP fragments, because some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. 40 ipFragOKs 1.3.6.1.2.1.4.
IP group 2 Object and OID Access Description ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 Read-write The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 Read-write An alternate routing metric for this route.
2 IP group Object and OID Access Description ipRouteMask 1.3.6.1.2.1.4.21.1.11 Read-write The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of the following: mask 255.0.0.0 255.255.0.0 255.255.
IP group Fabric OS MIB Reference 53-1002151-01 2 Object and OID Access Description ipAddressTable 1.3.6.1.2.1.4.34 Not accessible This table contains IPv4 and IPv6 addressing information relevant to the entity's interfaces. ipAddressEntry 1.3.6.1.2.1.4.34.1 Not accessible An address mapping for a particular interface. ipAddressAddrType 1.3.6.1.2.1.4.34.1.1 Not accessible The address type of ipAddressAddr. ipAddressAddr 1.3.6.1.2.1.4.34.1.
2 ICMP group ICMP group Implementation of the ICMP group is mandatory for all systems. 44 Object and OID Access Description icmpInMsgs 1.3.6.1.2.1.5.1 Read only The total number of ICMP messages that the entity received. This counter includes all ICMP messages counted by icmpInErrors. icmpInErrors 1.3.6.1.2.1.5.2 Read only The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on). icmpInDestUnreachs 1.3.6.1.2.1.
TCP group Object and OID Access Description icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 Read only The number of ICMP Source Quench messages sent. icmpOutRedirects 1.3.6.1.2.1.5.20 Read only The number of ICMP Redirect messages sent. For a host, this object is always 0, since hosts do not send redirects. icmpOutEchos 1.3.6.1.2.1.5.21 Read only The number of ICMP Echo (request) messages sent. icmpOutEchoReps 1.3.6.1.2.1.5.22 Read only The number of ICMP Echo Reply messages sent. icmpOutTimestamps 1.3.
2 46 TCP group Object and OID Access Description tcpPassiveOpens 1.3.6.1.2.1.6.6 Read only The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. tcpAttemptFails 1.3.6.1.2.1.6.7 Read only The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
TCP group 2 Object and OID Access Description tcpConnState 1.3.6.1.2.1.6.13.1.1 Read-write The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value.
2 UDP group UDP group Implementation of the UDP group is mandatory for all systems that implement the UDP. Object and OID Access Description udpInDatagrams 1.3.6.1.2.1.7.1 Read only The total number of UDP datagrams delivered to UDP users. udpNoPorts 1.3.6.1.2.1.7.2 Read only The total number of received UDP datagrams for which there was no application at the destination port. udpInErrors 1.3.6.1.2.1.7.
SNMP group Fabric OS MIB Reference 53-1002151-01 2 Object and OID Access Description snmpInPkts 1.3.6.1.2.1.11.1 Read only The total number of messages delivered to the SNMP entity from the transport service. snmpOutPkts 1.3.6.1.2.1.11.2 Read only The total number of SNMP messages that were passed from the SNMP protocol entity to the transport service. snmpInBadVersions 1.3.6.1.2.1.11.
2 SNMP group Object and OID Access Description snmpOutTooBigs 1.3.6.1.2.1.11.20 Read only The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is too large. snmpOutNoSuchNames 1.3.6.1.2.1.11.21 Read only The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “noSuchName.” snmpOutBadValues 1.3.6.1.2.1.11.
ifMIB group 2 ifMIB group The ifMIB group is implemented in Fabric OS v5.3.0 and later versions to support FCIP tunnels. There are entries in the ifXTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). The ifXtable is used to support 64-bit FC statistics counters. Object and OID Access Description ifXTable 1.3.6.1.2.1.31.1.1 Not accessible A list of interface entries. The number of entries is given by the value of ifNumber.
2 ifMIB group Object and OID Access Description ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 Read only The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a Broadcast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
ifMIB group 2 Object and OID Access Description ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 Read only The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
2 Generic traps Object and OID Access Description ifAlias 1.3.6.1.2.1.31.1.1.1.18 Read-write This object is an alias name for the interface as specified by a network manager, and provides a non-volatile handle for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string.
Generic traps 2 Trap name and OID Description linkDown 1.3.6.1.6.3.1.1.5.3 A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
2 56 Generic traps Fabric OS MIB Reference 53-1002151-01
Chapter 3 RMON MIB Objects In this chapter • RMON MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • RMON group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Statistics group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • History group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 RMON MIB overview - statistics 1.3.6.1.2.1.16.1 - etherStatsTable 1.3.6.1.2.1.16.1.1 - etherStatsEntry 1.3.6.1.2.1.16.1.1.1 - etherStatsIndex 1.3.6.1.2.1.16.1.1.1.1 - etherStatsDataSource 1.3.6.1.2.1.16.1.1.1.2 - etherStatsDropEvents 1.3.6.1.2.1.16.1.1.1.3 - etherStatsOctets 1.3.6.1.2.1.16.1.1.1.4 - etherStatsPkts 1.3.6.1.2.1.16.1.1.1.5 - etherStatsBroadcastPkts 1.3.6.1.2.1.16.1.1.1.6 - etherStatsMulticastPkts 1.3.6.1.2.1.16.1.1.1.7 - etherStatsCRCAlignErrors 1.3.6.1.2.1.16.1.1.1.
RMON MIB overview 3 - alarm 1.3.6.1.2.1.16.3 - alarmTable 1.3.6.1.2.1.16.3.1 - alarmEntry 1.3.6.1.2.1.16.3.1.1 - alarmIndex 1.3.6.1.2.1.16.3.1.1.1 - alarmInterval 1.3.6.1.2.1.16.3.1.1.2 - alarmVariable 1.3.6.1.2.1.16.3.1.1.3 - alarmSampleType 1.3.6.1.2.1.16.3.1.1.4 - alarmValue 1.3.6.1.2.1.16.3.1.1.5 - alarmStartupAlarm 1.3.6.1.2.1.16.3.1.1.6 - alarmRisingThreshold 1.3.6.1.2.1.16.3.1.1.7 - alarmFallingThreshold 1.3.6.1.2.1.16.3.1.1.8 - alarmRisingEventIndex 1.3.6.1.2.1.16.3.1.1.
3 RMON group Textual conventions Table 7 lists the textual conventions used for RMON MIB. TABLE 7 MIB-II textual conventions Type definition Value Description OwnerString Octet String of size 0 to 127 The data type used to model an administratively assigned name of the owner of a resource. EntryStatus Integer The status of a table entry.
Statistics group 3 Object and OID Access Description etherStatsOctets 1.3.6.1.2.1.16.1.1.1.4 Read only The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of Ethernet utilization. etherStatsPkts 1.3.6.1.2.1.16.1.1.1.5 Read only The total number of packets (including bad packets, broadcast packets, and multicast packets) received. etherStatsBroadcastPkts 1.3.
3 History group Object and OID Access Description etherStatsPkts256to511 Octets 1.3.6.1.2.1.16.1.1.1.17 Read only The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). etherStatsPkts512to102 3Octets 1.3.6.1.2.1.16.1.1.1.
History group Object and OID Access Description historyControlOwner 1.3.6.1.2.1.16.2.1.1.6 Read-write The entity that configured this entry and is therefore using the resources assigned to it. historyControlStatus 1.3.6.1.2.1.16.2.1.1.7 Read-write The status of this historyControl entry. 3 Ethernet history group Object and OID Access Description etherHistoryTable 1.3.6.1.2.1.16.2.2 Not accessible A list of Ethernet history entries. etherHistoryEntry 1.3.6.1.2.1.16.2.2.
3 Alarm group Object and OID Access Description etherHistoryOversizePkts 1.3.6.1.2.1.16.2.2.1.11 Read only The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed. etherHistoryFragments 1.3.6.1.2.1.16.2.2.1.
Event group 3 Object and OID Access Description alarmStartupAlarm 1.3.6.1.2.1.16.3.1.1.6 Read-write The alarm that may be sent when this entry is first set to valid. alarmRisingThreshold 1.3.6.1.2.1.16.3.1.1.7 Read-write A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold and the value at the last sampling interval was less than this threshold, a single event will be generated.
3 RMON Traps Object and OID Access Description eventLastTimeSent 1.3.6.1.2.1.16.9.1.1.5 Read-write The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero. eventOwner 1.3.6.1.2.1.16.9.1.1.6 Read-write The entity that configured this entry and is therefore using the resources assigned to it.
Chapter 4 FE MIB Objects In this chapter • FE MIB overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FIBRE-CHANNEL-FE-MIB (MIB-II branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcFeConfig group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcFeStatus group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcFeError group . . . . . . . .
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 8 FE MIBs and supported Fabric OS versions (Continued) Fabric OS version FIBRE-CHANNEL-FE-MIB (MIB-II branch) FCFABRIC-ELEMENT-MIB (experimental branch) v6.0.0 Yes No v5.x Yes No v4.x Yes No v3.1.x Yes No v3.0.x Yes Yes v2.6.x No Yes NOTE The port swap feature does not have any effect on SNMP for FE MIB.
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 FIBRE-CHANNEL-FE-MIB organization Figure 23 through Figure 28 depict the organization and structure of FIBRE-CHANNEL-FE-MIB.
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 - fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 - fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 - fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.3.
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 - fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 - fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 - fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 - fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 - fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 - fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 - fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 Definitions for FIBRE-CHANNEL-FE-MIB Table 9 lists the definitions for fcFeMIB. TABLE 9 FIBRE-CHANNEL-FE-MIB definitions Type definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 9 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Description Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
fcFeConfig group TABLE 9 4 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Description FcFeFxPortCapacity Integer from 1 to 448 Maximum number of Fx_Ports within a module. For the Brocade 300, this value is 24. For the Brocade 4100, this value is 32. For the Brocade 4900, this value is 64. For the Brocade 5000, this value is 32. For the Brocade 5100, this value is 40. For the Brocade 5300, this value is 80. For the Brocade 7500 or 7500E, this value is 32.
4 76 fcFeConfig group Object and OID Access Description fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 Read only The maximum number of modules in the fabric element, regardless of their current state. The valid value for all Brocade switches is 1. fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 Not accessible A table that contains information about the modules, one entry for each module in the fabric element. fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.
fcFeConfig group Fabric OS MIB Reference 53-1002151-01 4 Object and OID Access Description fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 Read only The number of Fx_Ports that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be contiguous.
4 78 fcFeConfig group Object and OID Access Description fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 Read only The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov” on page 78) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered. fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.
fcFeStatus group 4 fcFeStatus group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports. Object and OID Access Description fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 Not accessible A table that contains operational status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.
4 80 fcFeStatus group Object and OID Access Description fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 Read only The current operational status of the Fx_Port. Valid values: • online (1) • offline (2) • testing (3) • linkFailure (4) The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
fcFeError group 4 Object and OID Access Description fcFxPortClass2SeqDelivA greed 1.3.6.1.2.1.75.1.2.3.1.8 Read only Indicates whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed to. Valid values: • yes (1) - The Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. • no (2) - The Fx_Port has not agreed to support Class 2 sequential delivery from the fabric login.
4 fcFeAccounting group Object and OID Access Description fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 Not accessible A table that contains counters that record the numbers of errors detected, one entry for each Fx_Port. This table contains counters recording numbers of errors detected since the management agent re-initialized, one entry for each Fx_Port in the fabric element. The first six columnar objects after the port index correspond to the counters in the link error status block.
fcFeAccounting group Fabric OS MIB Reference 53-1002151-01 4 Object and OID Access Description fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 Not accessible A table that contains Class 1 accounting information recorded since the management agent re-initialized, one entry for each Fx_Port in the fabric element. fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 Not accessible An entry containing Class 1 accounting information for each Fx_Port. fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.
4 fcFeCapabilities group Object and OID Access Description fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 Read only The number of F_RJT frames generated by this Fx_Port against Class 2 frames. fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 Not accessible A table that contains Class 3 accounting information recorded since the management agent has re-initialized, one entry for each Fx_Port in the fabric element. fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.
FCFABRIC-ELEMENT-MIB (experimental branch) 4 Object and OID Access Description fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6 Read only The minimum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 Read only A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.
4 FCFABRIC-ELEMENT-MIB (experimental branch) • • • • Operational Error Accounting (not supported) Capability FCFABRIC-ELEMENT-MIB organization Figures 29 through 34 depict the organization and structure of FCFABRIC-ELEMENT-MIB.
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.
4 FCFABRIC-ELEMENT-MIB (experimental branch) - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 - fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 - fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 - fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 - fcFxPortAdminMode 1.3.6.1.3.42.2.
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeAcct (-- Not Supported --) FIGURE 33 fcFeAcct hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 - fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 - fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 - fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 - fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.
4 FCFABRIC-ELEMENT-MIB (experimental branch) TABLE 10 FCFABRIC-ELEMENT-MIB definitions (Continued) Type definition Value Description FabricName FcNameId The name identifier of a fabric. Each fabric provides a unique fabric name. Only the following formats are allowed: IEEE48 Local FcPortName FcNameId The name identifier associated with a port.
FCFABRIC-ELEMENT-MIB (experimental branch) TABLE 10 4 FCFABRIC-ELEMENT-MIB definitions (Continued) Type definition Value Description Fc0MediaCap Integer from 0 to 65535 bit 0 (unknown) bit 1 (single mode fibre (sm)) bit 2 (multimode fiber 50 micron (m5)) bit 3 (multimode fiber 62.
4 fcFeConfig group fcFeConfig group This group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports. The group represents a set of parameters associated with the fabric element or an Fx_Port to support its Nx_Ports. Implementation of this group is mandatory. 92 Object and OID Access Description fcFabricName 1.3.6.1.3.42.2.1.1.1 Read only The Name_Identifier of the fabric to which this fabric element belongs.
fcFeConfig group Fabric OS MIB Reference 53-1002151-01 4 Object and OID Access Description fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 Read only The number of Fx_Port that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive; however, the numbers are not required to be contiguous. fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 Read only The Name_Identifier of the module.
4 fcFeOp group Object and OID Access Description fcFxPortIntermixSupported 1.3.6.1.3.42.2.1.1.5.1.11 Read only A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. Valid values: • yes (1) • no (2) fcFxPortStackedConnMode 1.3.6.1.3.42.2.1.1.5.1.12 Read only A value indicating the mode of stacked connect supported by the Fx_Port. fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.
fcFeOp group Fabric OS MIB Reference 53-1002151-01 4 Object and OID Access Description fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 Read only Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is re-initialized. fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 Read only The address identifier by which this Fx_Port is identified within the fabric.
4 96 fcFeOp group Object and OID Access Description fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 Read only The current operational status of the Fx_Port: • online (1) Log in might proceed. • offline (2) Log in cannot proceed. • testing (3) Port is under test. link-failure (4) Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
fcFeOp group Fabric OS MIB Reference 53-1002151-01 4 Object and OID Access Description fcFxPortIntermixSuppAgre ed 1.3.6.1.3.42.2.1.2.4.1.8 Read only A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported. Valid values: • yes (1) • no (2) fcFxPortStackedConnMod eAgreed 1.3.6.1.3.42.2.1.2.4.1.
4 fcFeError group fcFeError group This group consists of tables that contain information about the various types of errors detected. The management station might use the information in this group to determine the quality of the link between the Fx_Port and its attached Nx_Port. Implementation of this group is optional. 98 Object and OID Access Description fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.
fcFeAcct group 4 fcFeAcct group Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable. fcFeCap group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used or not, as expressed in its respective object value in the configuration group. Implementation of this group is optional. Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description fcFxPortCapTable 1.3.6.1.3.42.2.1.
4 100 fcFeCap group Object and OID Access Description fcFxPortCapStackedConn Mode 1.3.6.1.3.42.2.1.5.1.1.11 Read only A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. fcFxPortCapClass2SeqDel Read only iv 1.3.6.1.3.42.2.1.5.1.1.12 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery. Valid values: • yes (1) • no (2) fcFxPortCapClass3SeqDel Read only iv 1.3.6.1.3.42.2.1.5.1.1.
Chapter 5 Entity MIB Objects In this chapter • Entity MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Textual conventions for Entity MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Entity MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Physical entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Logical entity group . . . . .
5 Entity MIB overview Entity MIB system organization of MIB objects Figure 35 through Figure 41 depict the organization and structure of the Entity MIB file system. - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 35 Overall tree structure for Entity MIB - entityPhysical - entPhysicalTable 1.3.6.1.2.1.47.1.1.
Entity MIB overview 5 - entityLogical - entLogicalTable 1.3.6.1.2.1.47.1.2.1 - entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 - entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 - entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 - entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 - entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 - entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 - entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 - entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 - entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.
5 Textual conventions for Entity MIB Definitions for Entity MIB Table 11 lists the objects or definitions that are imported into the Entity MIB and the modules from which they are imported.
SnmpEngineIdOrNone 5 Table 12 lists the possible values for PhysicalClass. TABLE 12 Possible values for PhysicalClass Values Description other (1) The physical entity class is known but does not match any of the supported values. unknown (2) The physical entity class is unknown to the agent. chassis (3) The physical entity class is an overall container for networking equipment.
5 Entity MIB objects • For other switches, the snmpEngineID takes the WWN. For example, if the WWN value is 10:00:00:05:1e:35:d5:ee, the snmpEngineID displays 80.00.06.34.B2.10.00.00.05.1E.35.D5.EE (hex) • If the WWN cannot be taken, the snmpEngineID takes the IP address + port number along with the private enterprise number and algorithm type used. An example of this type of snmpEngineID would be 00.00.06.34.00.00.00.A1.0A.20.93.CA (hex) Syntax OCTET STRING (SIZE(0..
Physical entity group Fabric OS MIB Reference 53-1002151-01 5 Object and OID Access Description entPhysicalVendorType 1.3.6.1.2.1.47.1.1.1.1.3 Read only An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II sysObjectID. An agent should set this object to an enterprise-specific registration identifier value, indicating the specific equipment type in detail.
5 108 Physical entity group Object and OID Access Description entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.
Physical entity group Fabric OS MIB Reference 53-1002151-01 5 Object and OID Access Description entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.
5 110 Physical entity group Object and OID Access Description entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 (continued) Read only If the agent cannot determine the parent-relative position for some reason, or if the associated value of entPhysicalContainedIn is 0, then the value -1 is returned; otherwise, a non-negative integer is returned, indicating the parent-relative position of this physical entity.
Physical entity group 5 Object and OID Access Description entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 Read only The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
5 112 Physical entity group Object and OID Access Description entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 Read only The vendor-specific model name associated with this physical component. The preferred value is the customer-visible part number, which might be printed on the component. If the model name string associated with the physical component is unknown to the agent, then this object contains a zero-length string. Set to serial number and part number (if available) respectively.
Physical entity group TABLE 13 Fabric OS MIB Reference 53-1002151-01 5 entPhysicalTable entries for Brocade switches Platform Blades Fans Power supply WWN card Brocade 200E 1 3 fans not a FRU 1 PS not a FRU 1 WWN unit not a FRU Brocade 3016 1 NA NA 1 WWN unit not a FRU Brocade 3250 1 3 fans not a FRU 1 PS not a FRU 1 WWN unit not a FRU Brocade 3850 1 4 fans not a FRU 2 PS not a FRU 1 WWN unit not a FRU Brocade 3900 1 6 fans in 3 FRUs 2 PS 1 WWN unit not a FRU Brocade 4012
5 Logical entity group Chassis: one entry Container: one entry for each FRU slot Power supply if the PS is not a FRU, it will be directly below the chassis FIGURE 42 Module if the Module is not a FRU, it will be directly below the chassis Fan If the Fan is not a FRU, it will be directly below the chassis entPhysicalTable containment hierarchy (entPhysicalContainsTable) Logical entity group This group is not supported. Entity mapping group This group is not supported.
Entity MIB conformance information 5 Entity MIB conformance information This section lists the entityConformance MIBs. Figure 41 on page 103 shows the structure of the entityConformance group. object and OID Access Description entityCompliance 1.3.6.1.2.1.47.3.1.1 Not accessible The compliance statement for SNMP entities that implement version 1 of the Entity MIB.
5 Entity MIB conformance information object and OID Access Description entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 Not accessible The collection of objects used to represent physical system components, for which a single agent provides management information. Objects: • entPhysicalDescr • entPhysicalVendorType • entPhysicalContainedIn • entPhysicalClass • entPhysicalParentRelPos • entPhysicalName entityLogicalGroup 1.3.6.1.2.1.47.3.2.
Entity MIB conformance information Fabric OS MIB Reference 53-1002151-01 5 object and OID Access Description entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 Not accessible The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
5 118 Entity MIB conformance information Fabric OS MIB Reference 53-1002151-01
Chapter 6 SW-MIB Objects In this chapter • SW-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • sw traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Switch system group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Switch Fabric group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 SW-MIB overview SW-MIB system organization of MIB objects Figure 43 through Figure 59 depict the organization and structure of SW-MIB.
SW-MIB overview 6 - swTrapsV2 - swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 - swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 - swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 - swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 - swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 - swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 - swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 - swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8 - swFabricReconfigTrap 1.3.6.1.4.1.1588.2.1.1.1.0.9 - swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1.0.10 - swExtTrap 1.
6 SW-MIB overview - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 - swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 - swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 - swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 - swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
SW-MIB overview 6 - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 - swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 - swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 - swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 - swNbIslState 1.3.6.1.4.1.
6 SW-MIB overview - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 - swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 - swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 - swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
SW-MIB overview 6 - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 - swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 - swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 - swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 - swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
6 SW-MIB overview - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 - swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 - swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 - swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
SW-MIB overview 6 - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.
6 SW-MIB overview - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 - swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 - swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 - swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 - swTrunkGrpNumber 1.3.6.1.4.1.
SW-MIB overview 6 - swConnUnitPortStatExtentionTable - swConnUnitPortStatEntry 1.3.6.1.4.1.1588.2.1.1.1.27.1 - swConnUnitCRCWithBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.1 - swConnUnitZeroTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.2 - swConnUnitFLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.3 - swConnUnitNLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.4 - swConnUnitStopTenancyStarVation 1.3.6.1.4.1.1588.2.1.1.1.27.1.5 - swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1.27.1.6 - swConnUnitTransferConnection 1.3.6.1.4.1.1588.2.1.
6 SW-MIB overview TABLE 14 SW-MIB textual conventions (Continued) Type definition Value Description SwFwActs Integer Valid Fabric Watch actions: 0 swFwNoAction 1 swFwErrlog 2 swFwSnmptrap 3 swFwErrlogSnmptrap 4 swFwPortloglock 5 swFwErrlogPortloglock 6 swFwSnmptrapPortloglock 7 swFwErrlogSnmptrapPortloglock 8 swFwRn 9 swFwElRn 10 swFwStRn 11 swFwElStRn 12 swFwPlRn 13 swFwElPlRn 14 swFwStPlRn 15 swFwElStPlRn 16 swFwMailAlert 17 swFwMailAlertErrlog 18 swFwMailAlertSnmptrap 19 swFwMailAlertErrlogSnmpt
SW-MIB overview TABLE 14 6 SW-MIB textual conventions (Continued) Type definition Value Description SwFwClassesAreas Integer Index of Fabric Watch classes and areas where thresholds can be monitored: Environment class: 1 swFwEnvTemp 2 swFwEnvFan (Not supported) 3 swFwEnvPS (Not supported) SFP class: 4 swFwTransceiverTemp 5 swFwTransceiverRxp 6 swFwTransceiverTxp 7 swFwTransceiverCurrent 57 swFwTransceiverVoltage Port class: 8 swFwPortLink 9 swFwPortSync 10 swFwPortSignal 11 swFwPortPe 12 swFwPortWo
6 sw traps TABLE 14 SW-MIB textual conventions (Continued) Type definition Value Description EportUtil and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. In the index swFwEnvTemp, Env refers to Environment class and Temp refers to the area Temperature.
sw traps TABLE 15 6 SW-MIB traps Trap name Commands to configure “swFault” on page 134 (not supported) N.A. “swSensorScn” on page 134 N.A. “swFCPortScn” on page 134 Always on “swEventTrap” on page 135 For more information, refer to the snmpConfig command in the Fabric OS Command Reference.
6 sw traps Trap name and OID Variables Description swFault 1.3.6.1.4.1.1588.2.1.1.1 .0.1 swDiagResult swSsn This trap is no longer generated. A swFault is generated whenever the diagnostics detect a fault with the switch. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE swSensorScn 1.3.6.1.4.1.1588.2.1.1.1 .0.2 swSensorStatus swSensorIndex swSensorType swSensorValue swSensorInfo swSsn Switch is faulty.
sw traps 6 Trap name and OID Variables Description swEventTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.4 swEventIndex swEventTimeInfo swEventLevel swEventRepeatCount swEventDescr swSsn swVfId This trap is generated when an event occurs with a level that is at or below swEventTrapLevel. #TYPE #SUMMARY A firmware event has been logged.
6 sw traps Trap name and OID Variables Description swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.6 swTrackChangesInfo swSsn swVfId Trap to be sent for tracking log in, log out, or configuration changes. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE Track changes has generated a trap.
Switch system group Trap name and OID Variables Description swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.10 swFCPortIndex swFCPortName swSsn swFCPortFlag swVfId The trap to be sent for tracking segmentation changes. swExtTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.11 6 The trap adds the SSN binding to the traps if it is enabled. swStateChangeTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.12 swOperStatus swVfId This trap is sent when the switch changes it state to online or offline. This trap is disabled by default.
6 Switch system group Object and OID Access Description swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 Read only The date and time when the system last booted. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 Read only The date and time when the firmware was last loaded to the switch.
Switch system group Object and OID Access Description swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 Read only The date and time when the BootPROM was last updated. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy 6 Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 Fabric OS MIB Reference 53-1002151-01 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.
6 Switch system group Object and OID Access Description swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 Read-write The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Possible values are: • online (1) - Set the switch to be accessible by an external FC port. • offline (2) - Set the switch to be inaccessible. • testing (3) - Set the switch to run the built-in test.
Switch system group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 Read-write The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. Possible values are: • swCurrent (1) - The flash contains the current firmware image or configuration file.
6 142 Switch system group Object and OID Access Description swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 Read-write The desired status of the switch beacon. Possible values are: • on (1) - The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. • off (2) - Set each LED to its regular status, indicating color and state. swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 Read only The result of the power-on startup test (POST) diagnostics.
Switch system group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22 .1.4 Read only The current value (reading) of the sensor. The value -2147483648 represents the maximum value of integer value; it also means that the sensor does not have the capability to measure the actual value. In v2.0, the temperature sensor value is in Celsius, the fan value is in RPM (revolutions per minute), and the power supply sensor reading is unknown.
6 Switch system group Object and OID Access Description swBrcdTrapBitMask 1.3.6.1.4.1.1588.2.1.1.1.1.34 Not accessible This represents the type of notification by a single bit. 0x01 - Fabric change event 0x02 - Device change event 0x04 - FAPWWN change event 0x08 - FDMI events swFCPortPrevType 1.3.6.1.4.1.1588.2.1.1.1.1.35 Not accessible This represents the port type of a port before it goes online or offline and it is valid only in swFcPortSCN trap.
Switch system group TABLE 16 Fabric OS MIB Reference 53-1002151-01 Sensors on the various Brocade switches (Continued) Platform Temp Fans Power supply swNumSensors / connUnitNumSensors Brocade 5470 2 sensors NA NA 2 Brocade 5480 2 sensors NA NA 2 Brocade 5481 2 sensors NA NA 2 Brocade VA-40FC 4 sensor 2 FRUs 2PS 8 Brocade 7500 3 sensors 3 fans 2 PS 18 Brocade 7600 3 sensors 3 fans 2 PS 18 Brocade 7800 Extension Switch 3 sensor 2 fans 2 PS 7 Brocade 12000 10 senso
6 Switch Fabric group Switch Fabric group 146 Object and OID Access Description swFabric 1.3.6.1.4.1.1588.2.1.1.1 .2 Not accessible The OID sub-tree for the switch Fabric group. swDomainID 1.3.6.1.4.1.1588.2.1.1.1 .2.1 Read-write The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state. swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1 .2.2 Read only Indicates whether the switch is the principal switch.
Switch Fabric group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.5 Read only The baud rate of the ISL. It is always unknown (0). Possible values are: • other (1) - None of the following. • oneEighth (2) - 155 Mbaud. • quarter (4) - 266 Mbaud. • half (8) - 532 Mbaud. • full (16) - 1 Gbaud. • double (32) - 2 Gbaud. • quadruple (64) - 4 Gbaud. • octuple (128) - 8 Gbaud. • decuple (256) - 10 Gbaud.
6 Switch agent configuration group Object and OID Access Description swVfId 1.3.6.1.4.1.1588.2.1.1.1 .2.15 Read only The virtual Fabric ID of the switch. swVfName 1.3.6.1.4.1.1588.2.1.1.1 .2.16 Read only This represents the virtual switch name configured in the switch. Switch agent configuration group Object and OID Access Description swAgtCfg 1.3.6.1.4.1.1588.2.1.1.1 .4 Not accessible The OID sub-tree for switch agent configuration group. swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1 .4.
Fibre Channel port group 6 Object and OID Access Description swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.3 Read-write This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string.
6 150 Fibre Channel port group Object and OID Access Description swFCport 1.3.6.1.4.1.1588.2.1.1.1.6 Not accessible The OID sub-tree for Fibre Channel port group. swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 Read only The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port, and any other types of Fibre Channel port.
Fibre Channel port group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.3 Read only The physical state of the port. Possible values are: • noCard (1) - No card is present in this switch slot. • noTransceiver (2) - No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on). • laserFault (3) - The module is signaling a laser fault (defective GBIC).
6 152 Fibre Channel port group Object and OID Access Description swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.11 Read only Counts the number of Fibre Channel words that the port has transmitted. You can convert words to bytes by multiplying this value by 4. swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.12 Read only Counts the number of Fibre Channel words that the port has received. You can convert words to bytes by multiplying this value by 4. swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.
Fibre Channel port group 6 Object and OID Access Description swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.26 Read only Counts the number of encoding error or disparity error outside frames received. swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.27 Read only Counts the number of invalid ordered sets received. swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.28 Read only Counts the number of Class 3 frames that the port has discarded. swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.
6 Name Server database group Object and OID Access Description swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.38 Read only This string is a bit map of the port status flags, including the port type. • physical (0) • virtual (1) swFCPortBrcdType 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.39 Read only This string indicates the Brocade port type.
Name Server database group Object and OID Access Description swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 Read only The contents of a Symbolic Name of the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its contents. This object variable corresponds to the contents of the Symbolic Name, with the first byte removed. swNsIPA 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
6 Event group Event group swEventTable identifies the error log messages by the switch. It can only have a maximum of 1024 entries. 156 Object and OID Access Description swEvent 1.3.6.1.4.1.1588.2.1.1.1 .8 Not accessible The OID sub-tree for switch event group. swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1 .8.1 Read-write Deprecated. “swAgtTrapSeverityLevel”, in the absence of swEventTrapLevel, specifies the trap severity level of each defined trap recipient host.
Fabric Watch group 6 Object and OID Access Description swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.4 Read only If the most recent event is the same as the previous, this number increments by 1, and is the count of consecutive times this particular event has occurred. swEventDescr 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.5 Read only A textual description of the event. For Fabric OS v6.2.0 and later releases, the format of error messages has changed.
6 158 Fabric Watch group Object and OID Access Description swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 Read-write This applies or cancels the configuration value changes. For a read operation, the return value is always swFwCancelWrite.
Fabric Watch group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 3 Read-write This object is used to point to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
6 160 Fabric Watch group Object and OID Access Description swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 0 Read-write Custom action matrix for changed event. swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 1 Read-write Custom action matrix for an exceeded event. swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 2 Read-write Custom action matrix for below event. swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 3 Read-write Custom action matrix for above event.
Fabric Watch group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Read only Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1).
6 Fabric Watch group Object and OID Access Description swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 Read only Last event time of the threshold. This value is in the same format as in swCurrentDate. swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 Read only Last state type of the threshold. Valid values: • swFW faulty • swInformative • swnormal or Inbetween swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 0 Read-write A behavior of which the thresholds generate event.
Fabric Watch group TABLE 18 Fabric OS MIB Reference 53-1002151-01 6 swFwName objects and object types (Continued) swFwName objects (swFwName) Object types (Threshold names) eportTXPerf007 E Port TX Performance 7 eportWords007 E Port Invalid Words 7 eportLinkreset007 E Port Link Reset 7 eportUtil007 E Port Util 7 (Not supported) eportTrunkUtil007 E Port Trunk Util 7 eportc3DiscardTo007 E Port C3 Discard 7 eportPktl007 E Port Packet Loss 7 (Not supported) fabricDI000 Fabric Domain ID fa
6 Fabric Watch group TABLE 18 swFwName objects and object types (Continued) swFwName objects (swFwName) Object types (Threshold names) fopportProtoErr0 FOP Port Protocol Errors 13 fopportRXPerf013 FOP Port RX Performance 13 fopportSignal013 FOP Port Loss of Signal 13 fopportState013 FOP Port State Changes 13 fopportSync013 FOP Port Loss of Sync 13 fopportTXPerf013 FOP Port TX Performance 13 fopportWords013 FOP Port Invalid Words 13 fopportTrunkUtil013 FOP Port Trunk Util 13 secTelnet00
End device group 6 NOTE The FCU port is supported on the following platforms only: Brocade 3016 Brocade 3014 Brocade 4012 Brocade 4020 Brocade 4016 Brocade 4024 Brocade 4018 Brocade 4424 Brocade 5440 Brocade 5450 Brocade 5460 Brocade 5410 Brocade 5480 Brocade 5470 End device group Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description swEndDevice 1.3.6.1.4.1.1588.2.1.1.1.21 Not accessible The OID sub-tree for end device group. swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.
6 Switch group Object and OID Access Description swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 Read only Invalid word count for the end device. swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Read only Invalid CRC count for the end device. Switch group Switch group is not supported. Object and OID Access Description swGroup 1.3.6.1.4.1.1588.2.1.1.1.22 Not accessible The OID sub-tree for switch group. swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.
Bloom performance monitor group 6 Bloom performance monitor group Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description swBlmPerfMnt 1.3.6.1.4.1.1588.2.1.1.1.23 Not accessible The OID sub-tree for bloom performance monitor group. swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 Not accessible AL_PA monitoring counter table. For the Brocade 4100, 12 filter monitors per port are supported. swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.
6 Trunking group Object and OID Access Description swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.7 Read only Gets SID information by reference number. SID (Source Identifier) is a 3-byte field in the frame header used to indicate the address identifier of the N_Port from which the frame was sent. swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3 Not accessible Filter-based monitoring counter.
Trunking group Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2. 1.1 Read only This object identifies the switch port index. The value of a port index is extracted from the second octet of the port WWN stored in swFCPortWwn (refer to “swFCPortWwn” in the Fibre Channel port group). swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2. 1.
6 Toptalker group Toptalker group 170 Object and OID Access Description swTopTalker 1.3.6.1.4.1.1588.2.1.1.1.25 Not accessible The OID sub-tree for TopTalker group. swTopTalkerMntMode 1.3.6.1.4.1.1588.2.1.1.1.25.1 Read only This object gives the mode in which toptalker is installed. Possible modes: • Fabricmode (1) • portmode (2) swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 Read only This object provides the number of toptalking flows that are existing in the switch.
CPU or memory usage group 6 CPU or memory usage group The memory usage of a system indicates the system's RAM. Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description swCpuOrMemoryUsage 1.3.6.1.4.1.1588.2.1.1.1. 26 Not accessible The object identifier sub-tree for CPU or memory usage group. swCpuUsage 1.3.6.1.4.1.1588.2.1.1.1. 26.1 Read only The system's CPU usage. swCpuNoOfRetries 1.3.6.1.4.1.1588.2.1.1.1. 26.
6 Switch connectivity unit port statistics extension table Switch connectivity unit port statistics extension table This table is an extension of connectivity unit port statistics table. This table can be queried only if the FA-MIB is enabled. 172 Object and OID Access Description swConnUnitPortStatExtent ionTable 1.3.6.1.4.1.1588.2.1.1.1. 27 Not accessible This table represents the connectivity unit port statistics. swConnUnitPortStatEntry 1.3.6.1.4.1.1588.2.1.1.1. 27.
Switch connectivity unit port statistics extension table Fabric OS MIB Reference 53-1002151-01 6 Object and OID Access Description swConnUnitFTB2Miss 1.3.6.1.4.1.1588.2.1.1.1. 27.1.11 Read only This counter is incremented when the port receives a frame with an SID/DID combination that cannot be routed by the VF module. Applicable to 8G platforms only. swConnUnitFTB6Miss 1.3.6.1.4.1.1588.2.1.1.1. 27.1.
6 174 Switch connectivity unit port statistics extension table Object and OID Access Description swConnUnitC3DiscardDue ToDestUnreachable 1.3.6.1.4.1.1588.2.1.1.1. 27.1.26 Read only The number of Class 3 frames discarded due to destination unreachable. swConnUnitC3DiscardDue ToTXTimeout 1.3.6.1.4.1.1588.2.1.1.1. 27.1.27 Read only The number of Class 3 transmit frames discarded due to timeout. swConnUnitC3DiscardOth er 1.3.6.1.4.1.1588.2.1.1.1. 27.1.
Chapter 7 High-Availability MIB Objects In this chapter • HA-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • High-Availability group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU history table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 HA-MIB overview - haMIB (1.3.6.1.4.1.1588.2.1.2) - highAvailability (1.3.6.1.4.1.1588.2.1.2.1) - haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 - fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 - fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 - fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.
High-Availability group TABLE 19 7 Objects imported into the HA-MIB (Continued) Object Imported from this module DisplayString SNMPv2-TC TimeStamp High-Availability group This section describes the MIB objects in the High-Availability group. Object and OID Access Description haStatus 1.3.6.1.4.1.1588.2.1.2.1 .1 Read only Indicates whether the system is redundant. Possible values are: • redundant (0) Dual CP with standby CP ready to take over.
7 FRU table Object and OID Access Description fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 Read only The current status of the FRU object in the slot. Valid values: • other (1) • unknown (2) • on (3) • off (4) • faulty (5) fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 Read only The slot number of the blade, and the unit number for everything else. fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 Read only The supplier ID. fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.
FRU history table TABLE 20 7 Valid FRU counts for the various Brocade switches (Continued) Platform Blades Fans Power supply WWN card Brocade DCX-4S 4 port blades 2 CP blades 2 fans 4 PS 2 WWNs Brocade 300 NA 3 fans 1 PS NA Brocade 5100 NA 2 fans 2 PS NA Brocade 5300 NA 3 fans 2 PS NA Brocade 8000 NA 3 FRUs 2 PS NA Brocade 7800 Extension Switch NA 2 fans 2 PS NA Brocade 6510 1 2 fans 2 PS 1 WWN Brocade DCX 8510-8 Backbone 8 port blades 2 CP blades 3 fans 4 PS
7 CP table Object and OID Access Description fruHistoryEvent Read only 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 The type of the FRU event. Valid values: • added (1) • removed (2) • invalid (3) fruHistoryTime Read only 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 The time at which this event happened. fruHistoryFactoryPartNum Read only 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 The Brocade part number of the FRU object. fruHistoryFactorySerialNum Read only 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 The Brocade serial number of the FRU object.
HA-MIB traps Object and OID Access Description cpIpGateway 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 Read only The IP address of the IP gateway for this CP. cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 Read only The last event related to this CP.
7 182 HA-MIB traps Fabric OS MIB Reference 53-1002151-01
Chapter 8 FICON MIB Objects In this chapter • FICON MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FICON RNID group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FICON LIRR group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FICON RLIR group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 FICON MIB overview - iso - org - dod - internet - private - enterprises - bsci - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 62 Overall tree structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 - nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 - nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 - nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
FICON MIB overview 8 - LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 - LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 - LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 - LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 - LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 - ficonRLIR - rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 - rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 - rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 - rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 - rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.
8 FICON MIB overview TABLE 21 186 FICON MIB textual conventions (Continued) Name Status Description Syntax RLIRLinkFailureType Current Represents the link failure type. INTEGER { bitErrorRate(2), lossOfSignal(3), nOSRecognized(4), primitiveSequenceTimeout(5), invalidSeqForPortState(6), loopInitializationTimeout(7), lossOfSignalInLoopInit(8) } RNIDManufacturer Current Represents the Manufacturer name or code.
FICON RNID group 8 FICON RNID group This group contains all Request Node Identification Data (RNID) group objects for FICON. Object and OID Access Description nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2. 1 Read only The number of entries in Request Node Identification Data (RNID) table. For additional information on FICON MIB tables, refer to the ficonShow command in the Fabric OS Command Reference. nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.
8 188 FICON RNID group Object and OID Access Description nodeRNIDPortType 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.11 Read only Port type (N, NL, E, or virtual port) of the connected port. nodeRNIDFormat 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.12 Read only Node identification data format of the connected port. nodeRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.13 Read only Node identification tag of the connected port. nodeRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.
FICON LIRR group Object and OID Access Description switchRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2. 4.1.9 Read only Identification tag of the switch. switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2. 4.1.10 Read only Identifies the parameters of the switch. nodeVfId 1.3.6.1.4.1.1588.2.1.1.50.2. 5 Read only The Virtual Fabric ID of the switch. For VF-unaware switches, this value will be 0. 8 FICON LIRR group This group contains all Link Incident Record Registration (LIRR) group objects for FICON.
8 FICON RLIR group FICON RLIR group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. 190 Object and OID Access Description rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 Read only The number of entries in a switch RLIR table. For additional information on FICON MIB tables, refer to the ficonShow command in the Fabric OS Command Reference. rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.
LinkIncident MIB traps group 8 LinkIncident MIB traps group Trap name and OID Variables linkIncidentMIBTrapPrefix 1.3.6.1.4.1.1588.2.1.1.50.21.0 linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 Fabric OS MIB Reference 53-1002151-01 Description The Link Incident traps. nodeRNIDIndex nodeRNIDIncidentPortWWN nodeRNIDConnectedPortWWN nodeVfId A device registered with the switch. linkRNIDDeviceDeRegistration nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.21.0.
8 192 LinkIncident MIB traps group Fabric OS MIB Reference 53-1002151-01
Chapter 9 FibreAlliance MIB Objects In this chapter • FibreAlliance MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Connectivity unit group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Statistics group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Service group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 FibreAlliance MIB overview - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + connUnitEventTable 1.3.6.1.3.94.1.11 + connUnitLinkTable 1.3.6.1.3.94.1.12 - trapReg - trapMaxClients 1.3.6.1.3.94.2.1 - trapClientCount 1.3.6.1.3.94.2.2 + trapRegTable 1.3.6.1.3.94.2.3 - revisionNumber 1.3.6.1.3.
FibreAlliance MIB overview 9 - connUnitTable 1.3.6.1.3.94.1.6 - connUnitEntry 1.3.6.1.3.94.1.6.1 - connUnitId 1.3.6.1.3.94.1.6.1.1 - connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 - connUnitType 1.3.6.1.3.94.1.6.1.3 - connUnitNumports 1.3.6.1.3.94.1.6.1.4 - connUnitState 1.3.6.1.3.94.1.6.1.5 - connUnitStatus 1.3.6.1.3.94.1.6.1.6 - connUnitProduct 1.3.6.1.3.94.1.6.1.7 - connUnitSn 1.3.6.1.3.94.1.6.1.8 - connUnitUpTime 1.3.6.1.3.94.1.6.1.9 - connUnitUrl 1.3.6.1.3.94.1.6.1.10 - connUnitDomainId 1.3.6.1.3.94.1.6.1.
9 FibreAlliance MIB overview - connUnitPortTable 1.3.6.1.3.94.1.10 - connUnitPortEntry 1.3.6.1.3.94.1.10.1 - connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 - connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 - connUnitPortType 1.3.6.1.3.94.1.10.1.3 - connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 - connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 - connUnitPortState 1.3.6.1.3.94.1.10.1.6 - connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 - connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 - connUnitPortModuleType 1.3.6.1.3.94.1.10.1.
FibreAlliance MIB overview 9 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 - connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 - connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 - connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 - connUnitLinkAgentAddressY 1.3.6.1.3.94.1.
9 FibreAlliance MIB overview - connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 - connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 - connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 - connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 - connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 - connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 - connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 - connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 - connUnitPortStatCountBBCreditZero 1.
FibreAlliance MIB overview 9 - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 74 ConnUnitServiceScalars hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 - connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 - connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 - connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 - connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.
9 FibreAlliance MIB overview TABLE 22 Definitions for FCMGMT-MIB (Continued) Type definition Value Description FcEventSeverity Integer 1 (unknown) 2 (emergency) Emergency status. 3 (alert) Alert status. 4 (critical) Critical status. 5 (error) Error status. 6 (warning) Warning status. 7 (notify) Notification status. 8 (info) Informational status. 9 (debug) Debug status. 10 (mark) All messages logged. FcUnitType Integer 1 (unknown) 2 (other) None of 3–14.
Connectivity unit group 9 Connectivity unit group Implementation of the connectivity group is mandatory for all systems. Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description uNumber 1.3.6.1.3.94.1.1 Read only The number of connectivity units present on this system (represented by this agent). Might be a count of the boards in a chassis or the number of full boxes in a rack. The connectivity unit is mapped to a switch. uNumber is always set to one. systemURL 1.3.6.1.3.94.1.
9 Connectivity unit group Object and OID Access Description connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 Read only An optional global-scope identifier for this connectivity unit. It must be a WWN for this connectivity unit or 16 octets of value 0. The following characteristics are required. • WWN formats requiring fewer than 16 octets must be extended to 16 octets with trailing 0 octets. • If a WWN is used for connUnitId, the same WWN must be used for connUnitGlobalId.
Connectivity unit group Object and OID Access Description connUnitNumports 1.3.6.1.3.94.1.6.1.4 Read only Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (external). The Brocade switches support 0 to maximum number of system supported ports. 9 NOTE: The ConnUnitNumports will not count the GE ports present on the FC4-16IP blade. The maximum number of supported ports are as follows.
9 Connectivity unit group Object and OID Access Description connUnitUpTime 1.3.6.1.3.94.1.6.1.9 Read only The number of centiseconds since the last unit initialization. connUnitUrl 1.3.6.1.3.94.1.6.1.10 Read-write URL to launch a management application, if applicable; otherwise an empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition as systemURL for keywords. (Same as systemURL.) The expected value for connUnitURL.0 is: “http://{a.b.c.
Connectivity unit group Object and OID Access Description connUnitConfigurationCh angeTime 1.3.6.1.3.94.1.6.1.16 Read only The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest time stamp of flash memory update. This represents a union of change information for connUnitConfigurationChangeTime 9 NOTE: This object is not supported. Fabric OS MIB Reference 53-1002151-01 connUnitNumRevs 1.3.6.1.3.94.1.
9 206 Connectivity unit group Object and OID Access Description connUnitControl 1.3.6.1.3.94.1.6.1.22 Read-write Controls the addressed connUnit. Each implementation might choose not to allow any or all of these values on a SET. Cold start and warm start are as defined in MIB-II and are not meant to be a factory reset.
Connectivity unit group Fabric OS MIB Reference 53-1002151-01 9 Object and OID Access Description connUnitRevsEntry 1.3.6.1.3.94.1.7.1 Not accessible Each entry contains the information for a specific revision. connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 Read only The connUnitId value for the connectivity unit that contains this revision table. connUnitRevsIndex 1.3.6.1.3.94.1.7.1.
9 Connectivity unit group Object and OID Access Description connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 Read only This describes the status of the sensor as a message. It may also provide some information about the sensor, for example: sensor 1: type 3 is OK, value is 33 Each contains the sensor status (and reading if applicable) in textual format. connUnitSensorType 1.3.6.1.3.94.1.8.1.7 Read only The type of component being monitored by this sensor.
Connectivity unit group Fabric OS MIB Reference 53-1002151-01 9 Object and OID Access Description connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 Read only Number of physical ports between 0 and maximum number of system supported ports in the connectivity unit (internal/embedded, external). To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. The Brocade switches support 0 to maximum number of system supported ports.
9 210 Connectivity unit group Object and OID Access Description connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 Read only Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to 0. The bits have the following definition: • unknown 0 • class-f 1 • class-one 2 • class-two 4 • class-three 8 • class-four 16 • class-five 32 • class-six 64 For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D.
Connectivity unit group 9 Object and OID Access Description connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 Read only An overall protocol status for the port. For a U_Port, the status should be ols (9). Possible values are: • unknown (1) • unused (2) - Device cannot report this status. • ready (3) - FCAL Loop or FCPH Link reset protocol initialization has completed. • warning (4) - Do not use. • failure (5) - Port is faulty. • notparticipating (6) - Loop not participating and does not have a loop address.
9 Connectivity unit group Object and OID Access Description connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 Read only The World Wide Name of the port, if applicable; otherwise, an empty string. This is in IEEE Extended format, and the extension contains the internal port number of each port. NOTE: The internal port number is 1 less than the port index.
Connectivity unit group Fabric OS MIB Reference 53-1002151-01 9 Object and OID Access Description connUnitPortControl 1.3.6.1.3.94.1.10.1.16 Read-write Controls the addressed connUnit’s port. Valid commands are: resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific reset operation. Examples of these operations are: • The Link Reset protocol. • The Loop Initialization protocol.
9 214 Connectivity unit group Object and OID Access Description connUnitPortControl 1.3.6.1.3.94.1.10.1.16 (continued) Read-write connUnitPortName 1.3.6.1.3.94.1.10.1.17 Read-write connUnitPortPhysicalNu mber 1.3.6.1.3.94.1.10.1.18 Read only This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex. Some implementations might have an internal port representation not compatible with the rules for table indices.
Connectivity unit group Fabric OS MIB Reference 53-1002151-01 9 Object and OID Access Description connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 Read only This is the bit mask that specifies the driver-level protocol capability of this port. If this is not applicable, return all bits set to 0. Return value = 07F The bits have the following definition. • 0 = unknown • 1 = Loop • 2 = Fabric • 4 = SCSI • 8 = TCP/IP • 16 = VI • 32 = FICON connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.
9 216 Connectivity unit group Object and OID Access Description connUnitEventTable 1.3.6.1.3.94.1.11 Not accessible The table of connectivity unit events. Errors, warnings, and information should be reported in this table. This table contains the 1024 most-recent event log entries. Only external RASlog messages are supported. Fabric OS v4.4.0 and later releases do not have Panic or Debug level messages. All external messages are documented in the Fabric OS Message Reference. connUnitEventEntry 1.3.
Connectivity unit group 9 Object and OID Access Description connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 Read only The event severity level. The mapping between error log severity level and this variable is: Error log FA-MIB none (0) unknown (1) Critical (1) critical (4) Error (2) error (5) Warning (3) warning (6) Informational (4) info (8) Debug (5) debug (9) For more information about severity, refer to “FcEventSeverity” in Table 22 on page 199. connUnitEventType 1.3.6.1.3.94.1.11.1.
9 218 Connectivity unit group Object and OID Access Description connUnitLinkTable 1.3.6.1.3.94.1.12 Not accessible A list of links known to this agent from this connectivity unit to other connectivity units- X is switch data and Y is other end.
Connectivity unit group Fabric OS MIB Reference 53-1002151-01 9 Object and OID Access Description connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 Read only This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits.
9 Statistics group Object and OID Access Description connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 Read only Type of the FC connectivity unit, as defined in connUnitType. ISL- Switch device. End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. Table 23 displays the types of the connectivity unit. connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 Read only This is the Fibre Channel ID of this port.
Statistics group Object and OID Access 9 Description connUnitPortStatCountEr Read only ro 1.3.6.1.3.94.4.5.1.3 A count of the errors that have occurred on this port. connUnitPortStatCountTx Read only Objects 1.3.6.1.3.94.4.5.1.4 The number of frames that have been transmitted by this port. A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents the sum total for all other transmitted objects.
9 Statistics group Object and OID Access Description connUnitPortStatCountP RJTFrames 1.3.6.1.3.94.4.5.1.13 Read only The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port. Return Value - 800000000 This is the total for all classes and is a Fibre Channel only statistic. NOTE: This object is not supported. connUnitPortStatCountCl ass1RxFrames 1.3.6.1.3.94.4.5.1.14 Read only The number of Class 1 Frames received at this port.
Statistics group 9 Object and OID Access Description connUnitPortStatCountCl ass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 Read only The number of times that FBSY was returned to this port because Class 2 Frame that could not be delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic.
9 Statistics group Object and OID Access connUnitPortStatCountTx Read only BroadcastObjects 1.3.6.1.3.94.4.5.1.32 Description The number of broadcast frames or packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated. Return value - 800000000 NOTE: This object is not supported. connUnitPortStatCountR xLinkResets 1.3.6.1.3.94.4.5.1.33 Read only The number of link resets received. This is a Fibre Channel only statistic.
Service group 9 Object and OID Access Description connUnitPortStatCountIn validOrderedSets 1.3.6.1.3.94.4.5.1.45 Read only The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel only statistic. connUnitPortStatCountFr amesTooLong 1.3.6.1.3.94.4.5.1.46 Read only The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI.
9 226 Service group Object and OID Access Description connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 Read only The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by connUnitSnsPortIdentifier (port address). Chassis switches containing the FC4-16IP blade will have eight GbE ports and treated as iSCSI Virtual Initiator. These ports will be part of the name server (NS) database.
SNMP trap registration group 9 SNMP trap registration group Object and OID Access Description trapMaxClients 1.3.6.1.3.94.2.1 Read only The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. trapClientCount 1.3.6.1.3.94.2.2 Read only The current number of rows in the trap table. trapRegTable 1.3.6.1.3.94.2.3 Not accessible A table containing a row for each IP address or port number to which traps are sent. trapRegEntry 1.3.6.1.3.94.2.3.
9 Revision number scalar TABLE 25 trapRegRowState for Read/Write State Description (Read) Description (Write) rowDestroy (1) Can never happen. Remove this row from the table. rowInactive (2) Indicates that this row does exist but that traps are not enabled to be sent to the target. If the row does not exist and the agent allows writes to the trap table, then a new row is created. The values of the optional columns are set to default values. Traps are not enabled to be sent to the target.
FibreAlliance MIB traps 9 FibreAlliance MIB traps Trap name and OID Variables connUnitStatusChan connUnitStatus ge connUnitState 1.3.6.1.3.94.0.1 Description The overall status of the connectivity unit has changed. Recommended severity level (for filtering) - alert. Generated when connUnitStatus changes. For a description of how the value is calculated, refer to “connUnitStatus” on page 203. Sample trap output for Fabric OS v6.1.0. connUnitStatus.16.0.0.96.105.144.109.136.0.0. 0.0.0.0.0.0.
9 FibreAlliance MIB traps Trap name and OID Variables Description connUnitSensorStat usChange 1.3.6.1.3.94.0.5 connUnitSensorStatus Overall status of the connectivity unit has changed. This trap is generated whenever the status of the sensors (like fan, power supply, temperature) present in the connectivity unit changes. Sample trap output for Fabric OS v6.1.0. connUnitSensorStatus.16.0.0.96.105.144.109.13 6.0.0.0.0.0.0.0.0.
Chapter 10 FibreAlliance Extension MIB Objects In this chapter • FibreAlliance extension MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SFP statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Port configuration table for Fabric Assigned PWWN feature . . . . . . . . . . . • Port configuration table for encryption or compression feature . . . . . . . .
10 FibreAlliance extension MIB overview - faExt (1.3.6.1.4.1.1588.2.1.1.1.28) - swSfpStatTable (1.3.6.1.4.1.1588.2.1.1.1.28.1) - swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1.1 - swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1 - swSfpVoltage 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2 - swSfpCurrent 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.3 - swSfpRxPower 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4 - swSfpTxPower 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.5 - swSfpPoweronHrs 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.6 - swSfpUnitId 1.3.6.1.4.1.1588.2.
SFP statistics table 10 SFP statistics table Object and OID Access Description swSfpStatTable 1.3.6.1.4.1.1588.2.1.1.1.28.1 Not accessible This table represents the diagnostic statistics of Small Form-factor Pluggable (SFP) optical transceivers. swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1. 1 Not accessible An entry containing the diagnostic statistics of SFPs. swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1. 1.1 Read only This object identifies the temperature of the SFP. swSfpVoltage 1.3.6.1.
10 Port configuration table for encryption or compression feature Object and OID Access Description swPortFapwwnConfigFapwwn Read only 1.3.6.1.4.1.1588.2.1.1.1.28.2. 1.1.2 The object represents the FAPWWN assigned to the port. It returns the WWN irrespective of the state of the FAPWWN. swPortFapwwnConfigType Read only 1.3.6.1.4.1.1588.2.1.1.1.28.2. 1.1.3 The object represents the type of FAPWWN.
Chapter 11 FCIP MIB Objects In this chapter • FCIP MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP entity instance table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP link table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP TCP connection table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP extended link table . .
11 FCIP MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 + fcipTcpConnTable .6 FIGURE 78 High level organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.3 fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.
FCIP entity instance table 11 - fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.3 fcipExtendedLinkCompressionRatio 1.3.6.1.4.1.1588.4.1.1.4 fcipExtendedLinkTcpSmoothedRTT 1.3.6.1.4.1.1588.4.1.1.5 fcipExtendedLinkRawBytes 1.3.6.1.4.1.1588.4.1.1.6 fcipExtendedLinkCompressedBytes 1.3.6.1.4.1.1588.4.1.1.7 fcipExtendedLinkConnectedCount 1.3.6.1.4.1.
11 FCIP link table Object and OID Access Description fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 Read create The Internet address for the entity, if configured. The format of this address is determined by the value of the fcipEntityAddressType object. fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 Read create A TCP port other than the FCIP Well-Known port on which the FCIP entity listens for new TCP connection requests.
FCIP TCP connection table 11 Object and OID Access Description fcipLinkRemFcipEntityId 1.3.6.1.2.1.224.1.1.5.1.8 Read create The identifier for the remote FCIP entity. fcipLinkRemFcipEntityAddre ssType 1.3.6.1.2.1.224.1.1.5.1.9 Read create The type of Internet address contained in the corresponding instance of fcipLinkRemFcipEntityAddress. Only address types IPv4 and IPv6 are supported. fcipLinkRemFcipEntityAddre ss 1.3.6.1.2.1.224.1.1.5.1.
11 FCIP extended link table FCIP extended link table The FCIP extended link table contains statistical information about FCIP tunnel transport operation. The information stored in this table is returned in response to portshow fciptunnel commands. 240 Object and OID Access Description fcipExtendedLinkTable 1.3.6.1.4.1.1588.4.1 Not accessible This table contains statistical information about FCIP tunnel compression, retransmission, packet loss, and latency details.
FCIP connection statistics table 11 FCIP connection statistics table Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description fcipConnStatsTable 1.3.6.1.4.1.1588.4.2 Not accessible The table contains statistical information about FCIP tunnel compression, retransmission, packet loss, and latency details. This table also gives details about FCIP circuit statistics for the Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade.
11 242 FCIP connection statistics table Fabric OS MIB Reference 53-1002151-01
Chapter 12 iSCSI MIB Objects In this chapter • iSCSI MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI instance attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI node attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI session attributes table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iSCSI session statistics table . . . .
12 iSCSI MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - iscsimibmodule - iscsiObjects - iscsiInstance + iscsiInstanceAttributesTable - iscsiPortal - iscsiTargetPortal - iscsiInitiatorPortal - iscsiNode + iscsiNodeAttributesTable - iscsiTarget - iscsiTgtAuthorization - iscsiInitiator - iscsiIntrAuthorization - iscsiSession + iscsiSessionAttributesTable + iscsiSessionStatsTable - iscsiConnection + isciConnectionAttributesTable FIGURE 84 High level organization - iscsiInstanceAt
iSCSI MIB overview 12 - iscsiNodesAttributesEntry iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 iscsiNodeMaxBurstLength 1.3.6.
12 iSCSI instance attributes table - iscsiConnectionAttributesEntry iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8 iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9 iscsiCxnMaxRecvDataSegLength 1.3.
iSCSI node attributes table 12 Object and OID Access Description iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.6 Read only A UTF-8 string set by the manufacturer describing the version of the implementation of this instance. The format of this string is determined by the manufacturer. It is for information purposes, and is not related to the iSCSI specification version numbers. It is the same as that of the fabos version. iscsiInstPortalNumber 1.3.6.1.2.1.142.1.1.1.1.
12 iSCSI node attributes table Object and OID Access iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 Description A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator to target node at the remote end of the connection during a log in request or response. NOTE: This object is not supported. iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 A node can operate in a target role, initiator role, or both.
iSCSI session attributes table 12 Object and OID Access Description iscsiNodeDefaultTime2Retain 1.3.6.1.2.1.142.1.1.5.1.1.15 Read-write The minimum time, in seconds, to wait, after an initial wait (Time2Wait), for a possible active iSCSI task reassignment after an unexpected connection termination or a connection reset. NOTE: This object is not supported. iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 Read-write iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.
12 250 iSCSI session attributes table Object and OID Access Description iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.1.5 Read only If iscsiSsnDirection is Outbound, this object is a UTF-8 string that contains the name of the remote target. If this session is a discovery session that does not specify a particular target, this object contains a zero-length string. If scsiSsnDirection is Inbound, this object contains a zero-length string. iscsiSsnTSIH 1.3.6.1.2.1.142.1.1.10.1.1.
iSCSI session statistics table 12 Object and OID Access Description iscsiSsnErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.10.1.1.20 Read only The level of error recovery negotiated between the initiator and the target. Higher numbers represent more detailed recovery schemes. iscsiSsnErrorDiscontinuityTime Read only 1.3.6.1.2.1.142.1.1.10.1.1.21 The value of SysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity.
12 iSCSI connection attributes table iSCSI connection attributes table The isciConnectionAttributesTable contains a list of active connections within each session. Object and OID Access Description iscsiConnectionAttributesTable 1.3.6.1.2.1.142.1.1.11.1 Not A list of connections belonging to each iSCSI instance present on the accessible system. iscsiConnectionAttributesEntry 1.3.6.1.2.1.142.1.1.11.1.1 Not An entry containing management information applicable to a accessible particular connection.
iSCSI connection attributes table Object and OID Fabric OS MIB Reference 53-1002151-01 Access 12 Description iscsiCxnMaxXmitDataSegLengt Read only h 1.3.6.1.2.1.142.1.1.11.1.1.11 The maximum data payload size supported for command or data PDUs able to be sent on this connection.The value is min(iscsiCxnMaxRecvDataSegLength, iscsiSsnMaxBurstLength). iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 Read only This object identifies the iSCSI header digest scheme in use within this connection.
12 254 iSCSI connection attributes table Fabric OS MIB Reference 53-1002151-01
Chapter 13 SNMPv2 MIB Objects In this chapter • SNMPv2 MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SNMP target address table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SNMP target parameters table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • SNMP community table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13 SNMP target address table - snmpTargetParamsTable 1.3.6.1.6.3.12.1.3 - snmpTargetParamsEntry 1.3.6.1.6.3.12.1.3.1 - snmpTargetParamsName 1.3.6.1.6.3.12.1.3.1.1 - snmpTargetParamsMPModel 1.3.6.1.6.3.12.1.3.1.2 - snmpTargetParamsSecurityModel 1.3.6.1.6.3.12.1.3.1.3 - snmpTargetParamsSecurityName 1.3.6.1.6.3.12.1.3.1.4 - snmpTargetParamsSecurityLevel 1.3.6.1.6.3.12.1.3.1.5 - snmpTargetParamsStorageType 1.3.6.1.6.3.12.1.3.1.6 - snmpTargetParamsRowStatus 1.3.6.1.6.3.12.1.3.1.
SNMP target parameters table 13 Object and OID Access Description snmpTargetAddrStorageType 1.3.6.1.6.3.12.1.2.1.8 Read create The storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row. snmpTargetAddrRowStatus 1.3.6.1.6.3.12.1.2.1.9 Read create The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo (4) or createAndWait (5).
13 SNMP community table Object and OID Access Description snmpTargetParamsStorageType 1.3.6.1.6.3.12.1.3.1.6 Read create The storage type for this conceptual row. Conceptual rows having the value permanent need not allow write-access to any columnar objects in the row. snmpTargetParamsRowStatus 1.3.6.1.6.3.12.1.3.1.7 Read create The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo (4) or createAndWait (5).
SNMP community table Fabric OS MIB Reference 53-1002151-01 13 Object and OID Access Description snmpCommunityContextEngineID 1.3.6.1.6.3.18.1.1.1.4 Read create The contextEngineID indicating the location of the context in which the management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. The default value is the snmpEngineID of the entity in which this object is instantiated. snmpCommunityContextName 1.3.6.1.6.3.18.1.1.1.
13 260 SNMP community table Fabric OS MIB Reference 53-1002151-01
Chapter 14 USM MIB Objects In this chapter • USM MIB objects overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 • USM statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 • USM user group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 USM MIB objects overview The descriptions of the MIB variables in this chapter come directly from the SNMP-USER-BASED-SM-MIB.
14 USM statistics - usmMIBObjects (1.3.6.1.6.3.15.1) - usmStats 1.3.6.1.6.3.15.1.1 - usmStatsUnsupportedSecLevels 1.3.6.1.6.3.15.1.1.1 - usmStatsNotInTimeWindows 1.3.6.1.6.3.15.1.1.2 - usmStatsUnknownUserNames 1.3.6.1.6.3.15.1.1.3 - usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 - usmStatsWrongDigests 1.3.6.1.6.3.15.1.1.5 - usmStatsDecryptionErrors 1.3.6.1.6.3.15.1.1.6 - usmUser 1.3.6.1.6.3.15.1.2 - usmUserSpinLock 1.3.6.1.6.3.15.1.2.1 - usmUserTable 1.3.6.1.6.3.15.1.2.2 - usmUserEntry 1.3.6.1.6.3.15.1.2.
USM user group 14 USM user group Fabric OS MIB Reference 53-1002151-01 Object and OID Access Description usmUserSpinLock 1.3.6.1.6.3.15.1.2.1 Read-write An advisory lock used to allow several cooperating Command Generator Applications to coordinate their use of facilities to alter secrets in the usmUserTable. usmUserTable 1.3.6.1.6.3.15.1.2.2 Not accessible The table of users configured in the SNMP engine's Local Configuration Datastore (LCD). usmUserEntry 1.3.6.1.6.3.15.1.2.2.
14 264 USM user group Object and OID Access Description usmUserOwnPrivKeyCha nge 1.3.6.1.6.3.15.1.2.2.1.1 0 Read create Behaves exactly as usmUserPrivKeyChange, with one notable difference: For the Set operation to succeed, the usmUserName of the operation requester must match the usmUserName that indexes the row which is targeted by this operation. In addition, the USM security model must be used for this operation. usmUserPublic 1.3.6.1.6.3.15.1.2.2.1.
Chapter IEEE 802.1x PAE MIB Objects 15 In this chapter • IEEE 802.1x PAE MIB objects overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 • Dot1x PAE system group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 • Dot1x PAE authenticator group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 IEEE 802.1x PAE MIB objects overview The descriptions of the MIB variables in this chapter come directly from the IEEE 802.1x PAE MIB.
15 IEEE 802.1x PAE MIB objects overview - dot1xPaeAuthenticator - dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 - dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 - dot1xAuthPaeState 1.0.8802.1.1.1.1.2.1.1.1 - dot1xAuthBackendAuthState 1.0.8802.1.1.1.1.2.1.1.2 - dot1xAuthAdminControlledDirections 1.0.8802.1.1.1.1.2.1.1.3 - dot1xAuthOperControlledDirections 1.0.8802.1.1.1.1.2.1.1.4 - dot1xAuthAuthControlledPortStatus 1.0.8802.1.1.1.1.2.1.1.5 - dot1xAuthAuthControlledPortControl 1.0.8802.1.1.1.1.2.1.1.
Dot1x PAE system group 15 - dot1xAuthSessionStatsTable 1.0.8802.1.1.1.1.2.4 - dot1xAuthSessionStatsEntry 1.0.8802.1.1.1.1.2.4.1 - dot1xAuthSessionOctetsRx 1.0.8802.1.1.1.1.2.4.1.1 - dot1xAuthSessionOctetsTx 1.0.8802.1.1.1.1.2.4.1.2 - dot1xAuthSessionFramesRx 1.0.8802.1.1.1.1.2.4.1.3 - dot1xAuthSessionFramesTx 1.0.8802.1.1.1.1.2.4.1.4 - dot1xAuthSessionId 1.0.8802.1.1.1.1.2.4.1.5 - dot1xAuthSessionAuthenticMethod 1.0.8802.1.1.1.1.2.4.1.6 - dot1xAuthSessionTime 1.0.8802.1.1.1.1.2.4.1.
15 Dot1x PAE authenticator group Dot1x PAE authenticator group 268 object and OID Access Description dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 Not accessible A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself. dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 Not accessible The configuration information for an authenticator PAE. dot1xAuthPaeState 1.0.8802.1.1.1.1.2.1.
Dot1x PAE authenticator group Fabric OS MIB Reference 53-1002151-01 15 object and OID Access Description dot1xAuthServerTimeout 1.0.8802.1.1.1.1.2.1.1.1 0 Read-write The value, in seconds, of the serverTimeout constant currently in use by the backend authentication state machine. dot1xAuthMaxReq 1.0.8802.1.1.1.1.2.1.1.1 1 Read-write The value of the maxReq constant currently in use by the backend authentication state machine. dot1xAuthReAuthPeriod 1.0.8802.1.1.1.1.2.1.1.
15 270 Dot1x PAE authenticator group object and OID Access Description dot1xAuthEapLengthErro rFramesRx 1.0.8802.1.1.1.1.2.2.1.1 0 Read only The number of EAPOL frames that have been received by this authenticator in which the Packet Body Length field is invalid. dot1xAuthLastEapolFram Read only eVersion 1.0.8802.1.1.1.1.2.2.1.1 1 The protocol version number carried in the most recently received EAPOL frame. dot1xAuthLastEapolFram Read only eSource 1.0.8802.1.1.1.1.2.2.1.
Dot1x PAE authenticator group Fabric OS MIB Reference 53-1002151-01 15 object and OID Access Description dot1xAuthAuthReauthsW hileAuthenticated 1.0.8802.1.1.1.1.2.3.1.1 0 Read only Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a re-authentication request (reAuthenticate = TRUE). dot1xAuthAuthEapStarts WhileAuthenticated 1.0.8802.1.1.1.1.2.3.1.
15 Dot1x PAE authenticator group object and OID Access Description dot1xAuthSessionOctets Rx 1.0.8802.1.1.1.1.2.4.1.1 Read only The number of octets received in user data frames on this port during the session. dot1xAuthSessionOctets Tx 1.0.8802.1.1.1.1.2.4.1.2 Read only The number of octets transmitted in user data frames on this port during the session. dot1xAuthSessionFrame sRx 1.0.8802.1.1.1.1.2.4.1.3 Read only The number of user data frames received on this port during the session.
Chapter 16 LLDP MIB Objects In this chapter • LLDP MIB objects overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • LLDP MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • LLDP-EXT-DOT1-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • LLDP-EXT-DOT3-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16 LLDP MIB objects overview - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpNotifications - lldpObjects - lldpConfiguration - lldpMessageTxInterval - lldpMessageTxHoldMultiplier - lldpReinitDelay - lldpTxDelay - lldpNotificationInterval - lldpPortConfigTable - lldpConfigManAddrTable - lldpStatistics - lldpStatsRemTablesLastChangeTime - lldpStatsRemTablesInserts - lldpStatsRemTablesDeletes - lldpStatsRemTablesDrops - lldpStatsRemTablesAgeouts - lldpStatsTxPortTable - lldpStatsRxPortT
LLDP MIB objects overview 16 - lldpStatistics - lldpStatsRemTablesLastChangeTime 1.0.8802.1.1.2.1.2.1 - lldpStatsRemTablesInserts 1.0.8802.1.1.2.1.2.2 - lldpStatsRemTablesDeletes 1.0.8802.1.1.2.1.2.3 - lldpStatsRemTablesDrops 1.0.8802.1.1.2.1.2.4 - lldpStatsRemTablesAgeouts 1.0.8802.1.1.2.1.2.5 - lldpStatsTxPortTable 1.0.8802.1.1.2.1.2.6 - lldpStatsTxPortEntry 1.0.8802.1.1.2.1.2.6.1 - lldpStatsTxPortNum 1.0.8802.1.1.2.1.2.6.1.1 - lldpStatsTxPortFramesTotal 1.0.8802.1.1.2.1.2.6.1.
16 LLDP MIB - lldpRemoteSystemsData - lldpRemTable 1.0.8802.1.1.2.1.4.1 - lldpRemEntry 1.0.8802.1.1.2.1.4.1.1 - lldpRemTimeMark 1.0.8802.1.1.2.1.4.1.1.1 - lldpRemLocalPortNum 1.0.8802.1.1.2.1.4.1.1.2 - lldpRemIndex 1.0.8802.1.1.2.1.4.1.1.3 - lldpRemChassisIdSubtype 1.0.8802.1.1.2.1.4.1.1.4 - lldpRemChassisId 1.0.8802.1.1.2.1.4.1.1.5 - lldpRemPortIdSubtype 1.0.8802.1.1.2.1.4.1.1.6 - lldpRemPortId 1.0.8802.1.1.2.1.4.1.1.7 - lldpRemPortDesc 1.0.8802.1.1.2.1.4.1.1.8 - lldpRemSysName 1.0.8802.1.1.2.1.4.1.1.
LLDP MIB Fabric OS MIB Reference 53-1002151-01 16 object and OID Access Description lldpMessageTxHoldMulti plier 1.0.8802.1.1.2.1.1.2 Read-write The time-t o-live value expressed as a multiple of the lldpMessageTxInterval object.
16 LLDP MIB object and OID Access Description lldpPortConfigTLVsTxEna ble 1.0.8802.1.1.2.1.1.6.1.4 Read-write The object, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. lldpConfigManAddrTable 1.0.8802.1.1.2.1.1.7 Not accessible This table is not supported.
LLDP MIB 16 object and OID Access Description lldpStatsRxPortNum 1.0.8802.1.1.2.1.2.7.1.1 Not The index value used to identify the port component (contained in the accessible local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable. lldpStatsRxPortFramesDisc ardedTotal 1.0.8802.1.1.2.1.2.7.1.2 Read only The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason.
16 280 LLDP MIB object and OID Access Description lldpLocPortTable 1.0.8802.1.1.2.1.3.7 Not accessible This table contains one or more rows per port information associated with the local system known to this agent. lldpLocPortEntry 1.0.8802.1.1.2.1.3.7.1 Not accessible The information about a particular port component. Entries may be created and deleted in this table by the agent. lldpLocPortNum 1.0.8802.1.1.2.1.3.7.1.
LLDP MIB 16 LLDP remote systems data group Fabric OS MIB Reference 53-1002151-01 object and OID Access Description lldpRemoteSystemsData 1.0.8802.1.1.2.1.4 Not LLDP remote systems data group. accessible lldpRemTable 1.0.8802.1.1.2.1.4.1 Not This table contains one or more rows per physical network connection accessible known to this agent. and keeps a local copy of the information retrieved. lldpRemEntry 1.0.8802.1.1.2.1.4.1.1 Not The information about a particular physical network connection.
16 282 LLDP MIB object and OID Access Description lldpRemManAddr 1.0.8802.1.1.2.1.4.2.1.2 Not The string value used to identify the management address component accessible associated with the remote system. The purpose of this address is to contact the management entity. lldpRemManAddrIfSubtype Read only 1.0.8802.1.1.2.1.4.2.1.3 The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system. lldpRemManAddrIfId 1.0.
LLDP-EXT-DOT1-MIB 16 LLDP-EXT-DOT1-MIB The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. LLDP-EXT-DOT1-MIB organization Figure 104 and Figure 105 depict the organization and structure of the LLDP-EXT-DOT1-MIB.
16 LLDP-EXT-DOT1-MIB - lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1 - lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.1.1 - lldpXdot1ConfigPortVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.1.1.1 - lldpXdot1ConfigVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.1.2 - lldpXdot1ConfigVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.1.2.1 - lldpXdot1ConfigVlanNameTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.2.1.1 - lldpXdot1ConfigProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.3 - lldpXdot1ConfigProtoVlanEntry 1.0.
LLDP-EXT-DOT1-MIB 16 lldpXdot1 configuration group object and OID Access Description lldpXdot1Config 1.0.8802.1.1.2.1.5.329 62.1.1 Not accessible IEEE 802.1 configuration group. lldpXdot1ConfigPortVlan Table 1.0.8802.1.1.2.1.5.329 62.1.1.1 Not accessible A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports. This table returns value only for the TE interfaces that are associated with the VLAN. lldpXdot1ConfigPortVlan Entry 1.0.8802.1.1.2.1.5.329 62.1.1.1.
16 LLDP-EXT-DOT1-MIB object and OID Access Description lldpXdot1ConfigProtocol Entry 1.0.8802.1.1.2.1.5.329 62.1.1.4.1 Not accessible The LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted.
LLDP-EXT-DOT1-MIB 16 object and OID Access Description lldpXdot1LocProtoVlanEnab led 1.0.8802.1.1.2.1.5.32962. 1.2.2.1.3 Read only The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system. If fcoeport is configured then that interface supports protocol-based VLAN and lldpXdot1LocProtoVlanEnabled should return true (1).
16 288 LLDP-EXT-DOT1-MIB object and OID Access Description lldpXdot1RemPortVlanId 1.0.8802.1.1.2.1.5.329 62.1.3.1.1.1 Read only The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of lldpXdot1RemPortVlanId should be zero. lldpXdot1RemProtoVlanT able 1.0.8802.1.1.2.1.5.329 62.1.3.
LLDP-EXT-DOT3-MIB 16 object and OID Access Description lldpXdot1RemProtocolIn dex 1.0.8802.1.1.2.1.5.329 62.1.3.4.1.1 Not accessible This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. lldpXdot1RemProtocolId 1.0.8802.1.1.2.1.5.329 62.1.3.4.1.2 Read only The octet string value used to identify the protocols associated with the given port of remote system.
16 LLDP-EXT-DOT3-MIB - lldpXdot3PortConfigTable 1.0.8802.1.1.2.1.5.4623.1.1.1 - lldpXdot3PortConfigEntry 1.0.8802.1.1.2.1.5.4623.1.1.1.1 - lldpXdot3PortConfigTLVsTxEnable 1.0.8802.1.1.2.1.5.4623.1.1.1.1.1 - lldpXdot3LocPortTable 1.0.8802.1.1.2.1.5.4623.1.2.1 - lldpXdot3LocPortEntry 1.0.8802.1.1.2.1.5.4623.1.2.1.1 - lldpXdot3LocPortAutoNegSupported 1.0.8802.1.1.2.1.5.4623.1.2.1.1.1 - lldpXdot3LocPortAutoNegEnabled 1.0.8802.1.1.2.1.5.4623.1.2.1.1.2 - lldpXdot3LocPortAutoNegAdvertisedCap 1.0.8802.1.1.2.1.5.
LLDP-EXT-DOT3-MIB 16 object and OID Access Description lldpXdot3PortConfigEntry 1.0.8802.1.1.2.1.5.4623.1.1.1. 1 Not accessible The LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. lldpXdot3PortConfigTLVsTxEnabl e 1.0.8802.1.1.2.1.5.4623.1.1.1. 1.1 Read-write The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.
16 LLDP-EXT-DOT3-MIB object and OID Access Description lldpXdot3LocLinkAggTabl e 1.0.8802.1.1.2.1.5.462 3.1.2.3 Not accessible This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent. lldpXdot3LocLinkAggEntr y 1.0.8802.1.1.2.1.5.462 3.1.2.3.1 Not accessible The link aggregation information about a particular port component. lldpXdot3LocLinkAggStat us 1.0.8802.1.1.2.1.5.462 3.1.2.3.1.
LLDP-EXT-DOT3-MIB Fabric OS MIB Reference 53-1002151-01 16 object and OID Access Description lldpXdot3RemPortAutoN egEnabled 1.0.8802.1.1.2.1.5.462 3.1.3.1.1.2 Read only The truth value used to indicate whether port auto-negotiation is enabled on the given port associated with the remote system. lldpXdot3RemPortAutoN egAdvertisedCap 1.0.8802.1.1.2.1.5.462 3.1.3.1.1.
16 294 LLDP-EXT-DOT3-MIB Fabric OS MIB Reference 53-1002151-01
Chapter IEEE 802.3 LAG MIB Objects 17 In this chapter • IEEE 802.3 LAG MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295 • Aggregator group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 • Aggregator port group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 IEEE 802.3 LAG MIB overview The descriptions of the MIB variables in this chapter come directly from the IEEE 802.
17 IEEE 802.3 LAG MIB overview - dot3adAggTable 1.2.840.10006.300.43.1.1.1 - dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 - dot3adAggIndex 1.2.840.10006.300.43.1.1.1.1.1 - dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.2 - dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.3 - dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.4 - dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.5 - dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.6 - dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.
Aggregator group 17 - dot3adAggPortStatsTable 1.2.840.10006.300.43.1.2.2 - dot3adAggPortStatsEntry 1.2.840.10006.300.43.1.2.2.1 - dot3adAggPortStatsLACPDUsRx 1.2.840.10006.300.43.1.2.2.1.1 - dot3adAggPortStatsMarkerPDUsRx 1.2.840.10006.300.43.1.2.2.1.2 - dot3adAggPortStatsMarkerResponsePDUsRx 1.2.840.10006.300.43.1.2.2.1.3 - dot3adAggPortStatsUnknownRx 1.2.840.10006.300.43.1.2.2.1.4 - dot3adAggPortStatsIllegalRx 1.2.840.10006.300.43.1.2.2.1.5 - dot3adAggPortStatsLACPDUsTx 1.2.840.10006.300.43.1.2.2.1.
17 298 Aggregator group object and OID Access Description dot3adAggActorSystemI D 1.2.840.10006.300.43. 1.1.1.1.4 Read only A 6-octet read-write MAC address value used as a unique identifier for the system that contains this aggregator. dot3adAggAggregateOrIn dividual 1.2.840.10006.300.43. 1.1.1.1.5 Read only A read-only Boolean value indicating whether the aggregator represents an aggregate (TRUE) or an individual link (FALSE). dot3adAggActorAdminKe y 1.2.840.10006.300.43. 1.1.1.1.
Aggregator port group 17 Aggregator port group object and OID Access Description dot3adAggPortTable 1.2.840.10006.300.43.1. 2.1 Not accessible A table that contains link aggregation control configuration information about every aggregation port associated with the device. A row appears in this table for each physical port. dot3adAggPortEntry 1.2.840.10006.300.43.1. 2.1.1 Not accessible A list of link aggregation control configuration parameters for each aggregation port on the device.
17 Aggregator port group object and OID Access Description dot3adAggPortPartnerOpe rSystemID 1.2.840.10006.300.43.1. 2.1.1.9 Read only A 6-octet read-only MAC address value representing the current value of the aggregation port's protocol partner's system ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol partner. NOTE: This object is not supported.
Aggregator port group object and OID Access Description dot3adAggPortPartnerOpe rPortPriority 1.2.840.10006.300.43.1. 2.1.1.19 Read only The priority value assigned to this aggregation port by the partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol partner. This is a 16-bit value. dot3adAggPortActorAdmin State 1.2.840.10006.300.43.1. 2.1.1.
17 Aggregator port group object and OID Access Description dot3adAggPortStatsIllegal Rx 1.2.840.10006.300.43.1. 2.2.1.5 Read only The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (43B.4). dot3adAggPortStatsLACPD Read only UsTx 1.2.840.10006.300.43.1. 2.2.1.6 302 The number of LACP PDUs transmitted on this Aggregation Port. dot3adAggPortStatsMarke rPDUsTx 1.2.840.10006.300.43.1. 2.2.1.
Aggregator port group object and OID Access Description dot3adAggPortDebugActor ChurnState 1.2.840.10006.300.43.1. 2.3.1.5 Read only The state of the Actor Churn detection machine (43.4.17) for the aggregation port. Valid values: • noChurn - Indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state • churn - Indicates that the state machine is in the ACTOR_CHURN state. dot3adAggPortDebugPart nerChurnState 1.2.840.10006.300.43.1. 2.3.1.
17 304 Aggregator port group Fabric OS MIB Reference 53-1002151-01
Chapter 18 Bridge-MIB Objects In this chapter • Bridge-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Bridge-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • P-Bridge MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Q-Bridge MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • RSTP MIB . .
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - dot1dNotifications 1.3.6.1.2.1.17.0 - dot1d base group - dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1 - dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2 - dot1dBaseType 1.3.6.1.2.1.17.1.3 - dot1dStp group - dot1dStpProtocolSpecification 1.3.6.1.2.1.17.2.1 - dot1dStpPriority 1.3.6.1.2.1.17.2.2 - dot1dStpTimeSinceTopologyChange 1.3.6.1.2.1.17.2.3 - dot1dStpTopChanges 1.3.6.1.2.1.17.2.4 - dot1dStpDesignatedRoot 1.3.6.1.2.1.17.2.5 - dot1dStpRootCost 1.3.6.1.2.1.17.2.
Bridge-MIB overview 18 - dot1dBridge 1.3.6.1.2.1.17 - dot1dTp - dot1dTpPortOverflowTable 1.3.6.1.2.1.17.4.6 - dot1dTpPortOverflowEntry 1.3.6.1.2.1.17.4.6.1 - dot1dTpPortInOverflowFrames 1.3.6.1.2.1.17.4.6.1.1 - dot1dTpPortOutOverflowFrames 1.3.6.1.2.1.17.4.6.1.2 - dot1dTpPortInOverflowDiscards 1.3.6.1.2.1.17.4.6.1.3 - pBridgeMIB - pBridgeMIBObjects - dot1dExtBase - dot1dDeviceCapabilities 1.3.6.1.2.1.17.6.1.1.1 - dot1dTrafficClassesEnabled 1.3.6.1.2.1.17.6.1.1.2 - dot1dGmrpStatus 1.3.6.1.2.1.17.6.1.1.
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - qBridgeMIB - qBridgeMIBObjects - dot1qBase - dot1qVlanVersionNumber 1.3.6.1.2.1.17.7.1.1.1 - dot1qMaxVlanId 1.3.6.1.2.1.17.7.1.1.2 - dot1qMaxSupportedVlans 1.3.6.1.2.1.17.7.1.1.3 - dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 - dot1qGvrpStatus 1.3.6.1.2.1.17.7.1.1.5 - dot1qTp - dot1qFdbTable 1.3.6.1.2.1.17.7.1.2.1 - dot1qFdbEntry 1.3.6.1.2.1.17.7.1.2.1.1 - dot1qFdbId 1.3.6.1.2.1.17.7.1.2.1.1.1 - dot1qFdbDynamicCount 1.3.6.1.2.1.17.7.1.2.1.
Bridge-MIB overview 18 - dot1qVlan - dot1qVlanCurrentTable 1.3.6.1.2.1.17.7.1.4.2 - dot1qVlanCurrentEntry 1.3.6.1.2.1.17.7.1.4.2.1 - dot1qVlanTimeMark 1.3.6.1.2.1.17.7.1.4.2.1.1 - dot1qVlanIndex 1.3.6.1.2.1.17.7.1.4.2.1.2 - dot1qVlanFdbId 1.3.6.1.2.1.17.7.1.4.2.1.3 - dot1qVlanCurrentEgressPorts 1.3.6.1.2.1.17.7.1.4.2.1.4 - dot1qVlanCurrentUntaggedPorts 1.3.6.1.2.1.17.7.1.4.2.1.5 - dot1qVlanStatus 1.3.6.1.2.1.17.7.1.4.2.1.6 - dot1qVlanCreationTime 1.3.6.1.2.1.17.7.1.4.2.1.7 - dot1qVlanStaticTable 1.3.6.1.
18 Bridge-MIB Bridge-MIB The Bridge MIB module for managing devices that support IEEE 802.1D. Bridge-MIB traps Trap name and OID Description dot1dNotifications 1.3.6.1.2.1.17.0 Notifications for the Spanning Tree Protocol. newRoot 1.3.6.1.2.1.17.0.1 This notification indicates that the sending agent is the new root of the Spanning Tree. It is sent by a bridge soon after its election as the new root. topologyChange 1.3.6.1.2.1.17.0.
Bridge-MIB 18 Object and OID Access Description dot1dBasePortCircuit 1.3.6.1.2.1.17.1.4.1.3 Read only This object contains the name of an object unique to this port. For example, when multiple ports correspond one-to-one with multiple X.25 virtual circuits, this value might identify an object instance (for example, the first) associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value {0 0}.
18 312 Bridge-MIB Object and OID Access Description dot1dStpMaxAge 1.3.6.1.2.1.17.2.8 Read only The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. dot1dStpHelloTime 1.3.6.1.2.1.17.2.
Bridge-MIB 18 Object and OID Access Description dot1dStpPortState 1.3.6.1.2.1.17.2.15.1.3 Read only The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. Values: • disabled (1) • blocking (2) • listening (3) • learning (4) • forwarding (5) • broken (6) dot1dStpPortEnable 1.3.6.1.2.1.17.2.15.1.4 Read-write The enabled or disabled status of the port.
18 Bridge-MIB dot1dTp group Implementation of the dot1dTp sub-tree is optional. It is implemented by those bridges that support the transparent bridging mode. A transparent or SRT bridge will implement this sub-tree. 314 Object and OID Access Description dot1dTpFdbTable 1.3.6.1.2.1.17.4.3 Not accessible A table that contains information about unicast entries for which the bridge has forwarding and filtering information.
Bridge-MIB Object and OID Access Description dot1dTpPortInFrames 1.3.6.1.2.1.17.4.4.1.3 Read only The number of frames that have been received by this port from its segment. 18 NOTE: A frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including the bridge management frames. dot1dTpPortOutFrames 1.3.6.1.2.1.17.4.4.1.
18 P-Bridge MIB P-Bridge MIB The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998, including Restricted Group Registration defined by IEEE 802.1t-2001. The following tables are not supported: • • • • • • 316 dot1dTpHCPortTable dot1dUserPriorityRegenTable dot1dTrafficClassTable dot1dPortOutboundAccessPriorityTable dot1dPortGarpTable dot1dPortGmrpTable Object and OID Access Description dot1dBase 1.3.6.1.2.1.17.
P-Bridge MIB 18 Object and OID Access Description dot1dTpPortOutOverflowFr ames 1.3.6.1.2.1.17.4.6.1.2 Read only The number of times the associated dot1dTpPortOutFrames counter has overflowed. dot1dTpPortInOverflowDis cards 1.3.6.1.2.1.17.4.6.1.3 Read only The number of times the associated dot1dTpPortInDiscards counter has overflowed. dot1dExtBase group Object and OID Access Description dot1dDeviceCapabilities 1.3.6.1.2.1.17.6.1.1.1 Read only Indicates the optional parts of IEEE 802.
18 Q-Bridge MIB Object and OID Access Description dot1dPortCapabilitiesEntry 1.3.6.1.2.1.17.6.1.1.4.1 Not accessible A set of capabilities information about this port indexed by dot1dBasePort. dot1dPortCapabilities 1.3.6.1.2.1.17.6.1.1.4.1.1 Read only Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis, that are implemented by the device, and that are manageable through this MIB. • dot1qDot1qTagging (0) - Supports 802.1Q VLAN tagging of frames and GVRP.
Q-Bridge MIB 18 dot1qBase group Object and OID Access Description dot1qVlanVersionNumber 1.3.6.1.2.1.17.7.1.1.1 Read only The version number of IEEE 802.1Q that the device supports. dot1qMaxVlanId 1.3.6.1.2.1.17.7.1.1.2 Read only The maximum IEEE 802.1Q VLAN-ID that the device supports. dot1qMaxSupportedVlans 1.3.6.1.2.1.17.7.1.1.3 Read only The maximum number of IEEE 802.1Q VLANs that the device supports. dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 Read only The current number of IEEE 802.
18 320 Q-Bridge MIB Object and OID Access Description dot1qTpFdbStatus 1.3.6.1.2.1.17.7.1.2.2.1.3 Read only The status of this entry. Values: • other (1) - This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded.
Q-Bridge MIB 18 Object and OID Access Description dot1qForwardAllForbidden Ports 1.3.6.1.2.1.17.7.1.2.4.1.3 Read-write The set of ports configured by the management in this VLAN for which the service requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. dot1qForwardUnregistered Table 1.3.6.1.2.1.17.7.1.2.
18 322 Q-Bridge MIB Object and OID Access Description dot1qStaticUnicastStatus 1.3.6.1.2.1.17.7.1.3.1.1.4 Read-write This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following values. • invalid (2) - Writing this value to the object removes the corresponding entry. • permanent (3) - This entry is currently in use and will remain so after the next reset of the bridge.
Q-Bridge MIB 18 Object and OID Access Description dot1qStaticMulticastForbid denEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.4 Read-write The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must not be forwarded, regardless of any dynamic information, for example, from GMRP. dot1qStaticMulticastStatus 1.3.6.1.2.1.17.7.1.3.2.1.5 Read-write This object indicates the status of this entry.
18 Q-Bridge MIB Object and OID Access Description dot1qVlanStatus 1.3.6.1.2.1.17.7.1.4.2.1.6 Read only This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following values. • permanent (2) - This entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device.
RSTP MIB 18 Object and OID Access Description dot1qTpVlanPortOutFrame s 1.3.6.1.2.1.17.7.1.4.6.1.2 Read only The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes the bridge management frames originated by this device that are classified as belonging to this VLAN (for example, GMRP, but not GVRP or STP). dot1qTpVlanPortInDiscards Read only 1.3.6.1.2.1.17.7.1.4.6.1.
18 326 RSTP MIB object and OID Access Description dot1dStpPortOperEdgeP ort 1.3.6.1.2.1.17.2.19.1.3 Read only The operational value of the edge port parameter. The object is initialized to the value of the corresponding instance of dot1dStpPortAdminEdgePort. When the corresponding instance of dot1dStpPortAdminEdgePort is set, this object will be changed as well. This object will also be changed to false on reception of a BPDU. dot1dStpPortAdminPoint ToPoint 1.3.6.1.2.1.17.2.19.1.
Chapter 19 BD MIB Objects In this chapter • BD MIB objects overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 BD Traps - bdConfig - bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 - bdLThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.2 - bdCThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.3 - bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 - bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5 - bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.6 - nBdType 1.3.6.1.4.1.1588.2.1.1.51.1.7 FIGURE 121 bdConfig hierarchy - bdStats - bdNumOfEntries 1.3.6.1.4.1.1588.2.1.1.51.2.1 - bdStatsTable 1.3.6.1.4.1.1588.2.1.1.51.2.2 - bdStatsEntry 1.3.6.1.4.1.1588.2.1.1.51.2.2.
BD configuration 19 BD configuration The OID represents the Bottleneck configuration. NOTE When alerting is never enabled in the lifetime of the daemon, junk values are expected for alert-related parameters. When alerting is enabled before being disabled, non-junk values are expected for alert-related parameters. Object and OID Access Description bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 Read only This object represents the status of bottleneck detection feature if enabled in the switch.
19 330 BD statistics Object and OID Access Description bdStatsEntry 1.3.6.1.4.1.1588.2.1.1.51.2. 2.1 Not accessible An entry of BD statistics. userPortNumber 1.3.6.1.4.1.1588.2.1.1.51.2. 2.1.1 Read only This object represents the user port indices of bottleneck monitored ports like F_port, E_port, L_port, and FCOE_port. bdSampleTime 1.3.6.1.4.1.1588.2.1.1.51.2. 2.1.2 Read only This object represents the sample time. The value is returned in Epoch[Unix] time. bdType 1.3.6.1.4.1.1588.2.1.1.51.
Appendix A MIB Object Groupings In this appendix • Switch variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Sensor variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Port variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Event variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Event variables • fcFxPortTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 • fcFxConfTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 • fcFxPortStatusTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 • fcFxPortPhysTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 • fcFxPortCapTable. . . .
iSCSI instance information variables A iSCSI instance information variables MIB variables that assist in gathering information about iSCSI instances are in the following tables. • iSCSI instance attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 • iSCSI node attributes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 • iSCSI session statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A 334 iSCSI instance information variables Fabric OS MIB Reference 53-1002151-01
Appendix B Mapping of CLI Counters to MIB Objects In this appendix • portStatsShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • portErrShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • portStats64Show command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • portShow command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B portErrShow command TABLE 27 portStatsShow command (Continued) Counters MIB Object MIB OID er64_enc_out connUnitPortStatCountEncodingDisparityErrors 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.4.5.1.41 subtracted from connUnitPortStatCountInvalidTxWords er_bad_os connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 er_rx_c3_timeout swConnUnitC3DiscardDueToRXTimeout 1.3.6.1.4.1.1588.2.1.1.1.27.1.25 er_tx_c3_timeout swConnUnitC3DiscardDueToTXTimeout 1.3.6.1.4.1.1588.2.1.1.1.27.1.
portStats64Show command TABLE 28 B portErrShow command (Continued) Counters MIB Object MIB OID bad_eof swConnUnitBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.15 enc_out connUnitPortStatCountEncodingDisparityErrors subtracted from connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.4.5.1.41 disc_c3 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.28 link_fail connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.
B portShow command TABLE 29 portStats64Show command (Continued) Counters MIB Object MIB OID er64_enc_out connUnitPortStatCountEncodingDisparityErr ors subtracted from connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.4.5.1.41 er64_disc_c3 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.
Index A accounting group, 82, 99 address translation group, 38 aggregator group, 297 aggregator port group, 299 B bd MIB, 327 before loading MIBs, 9 Bridge-MIB, 305 Brocade MIB files, 7 C capability group, 84, 99 commands, 20 errShow, 4 snmpConfig, 4, 20 switchStatusPolicySet, 5 configuration group, 75, 92 configuring SNMP, 20 connectivity group, 201, 246 CPU or memory usage group, 171 D definitions for entity MIB, 104 definitions for Fcfabric-Element-MIB, 89 definitions for Fcmgmt-MIB, 199, 246 definit
high-availability group, 177 I ICMP group, 44 IEEE 802.1x MIB objects overview, 265 IEEE 802.1x PAE MIB, 265 IEEE 802.
switchStatusPolicySet command, 5 sw-MIB system organization of MIB objects, 120 system group, 33, 137, 256 T TCP group, 45 textual conventions, 32, 60, 104, 185 toptalker group, 170 transmission group, 48 traps, 4 trunking group, 168 U UDP group, 48 understanding MIBs, 3 understanding SNMP bASICs, 2 unsupported tables, 228 unsupported traps, 229 usmMIBObjects group, 262 usmMIBObjects overview, 261 Fabric OS MIB Reference 53-1002151-01 341
342 Fabric OS MIB Reference 53-1002151-01
