Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 167
53-1002151-01
Bloom performance monitor group
6
Bloom performance monitor group
Object and OID Access Description
swBlmPerfMnt
1.3.6.1.4.1.1588.2.1.1.1.23
Not
accessible
The OID sub-tree for bloom performance monitor group.
swBlmPerfALPAMntTable
1.3.6.1.4.1.1588.2.1.1.1.23.1
Not
accessible
AL_PA monitoring counter table.
For the Brocade 4100, 12 filter monitors per port are supported.
swBlmPerfALPAMntEntry
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1
Not
accessible
AL_PA monitoring counter for given AL_PA.
swBlmPerfAlpaPort
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.1
Read only This object identifies the port index of the switch.
swBlmPerfAlpaIndx
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.2
Read only This object identifies the AL_PA index. There can be 126 AL_PA
values.
swBlmPerfAlpa
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.3
Read only This object identifies the AL_PA values. These values range between
x'01' and x'EF' (1 to 239). AL_PA value x'00' is reserved for FL_Port.
If Alpha device is invalid, then it will have -1 value.
swBlmPerfAlpaCRCCnt
1.3.6.1.4.1.1588.2.1.1.1.23.1.
1.4
Read only Get CRC count for given AL_PA and port. This monitoring provides
information on the number of CRC errors that occurred on the
frames destined to each possible AL_PA attached to a specific port.
For the Brocade 4100, this value will always be 0. CRC counters are
not supported on this platform.
swBlmPerfEEMntTable
1.3.6.1.4.1.1588.2.1.1.1.23.2
Not
accessible
End-to-end monitoring counter table.
swBlmPerfEEMntEntry
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1
Not
accessible
End-to-end monitoring counter for given port.
swBlmPerfEEPort
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.1
Read only This object identifies the port number of the switch.
swBlmPerfEERefKey
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.2
Read only This object identifies the reference number of the counter. This
reference is a number assigned when a filter is created. In the SNMP
Index, start with one instead of 0, add one to the actual reference
key.
swBlmPerfEECRC
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.3
Read only End-to-end CRC error for the frames that matched the SID-DID pair.
swBlmPerfEEFCWRx
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.4
Read only Get end-to-end count of Fibre Channel words (FCW) received by the
port that matched the SID-DID pair.
swBlmPerfEEFCWTx
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.5
Read only Get end-to-end count of Fibre Channel words (FCW) transmitted by
the port that matched the SID-DID pair.
swBlmPerfEESid
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.6
Read only Gets DID information by reference number.