Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

168 Fabric OS MIB Reference
53-1002151-01
Trunking group
6
Trunking group
swBlmPerfEEDid
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.7
Read only Gets SID information by reference number. SID (Source Identifier) is
a 3-byte field in the frame header used to indicate the address
identifier of the N_Port from which the frame was sent.
swBlmPerfFltMntTable
1.3.6.1.4.1.1588.2.1.1.1.23.3
Not
accessible
Filter-based monitoring counter.
To configure the predefined monitors on port, use the fmmonitor
--addmonitor <frame_type> -port <slot/port_list> command.
To configure the user-defined monitors on port, use one of the
following commands:
• fmmonitor --create <frame_type> -pat <bitpattern> [-port
<slot/port_list>]
• fmmonitor --addmonitor <frame_type> -port <slot/port_list>
swBlmPerfFltMntEntry
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1
Not
accessible
Filter-based monitoring counter for given port.
swBlmPerfFltPort
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.1
Read only This object identifies the port number of the switch.
swBlmPerfFltRefkey
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.2
Read only This object identifies the reference number of the filter. This
reference number is assigned when a filter is created. In the SNMP
Index, start with one instead of 0, add one to actual reference key.
swBlmPerfFltCnt
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.3
Read only Get statistics of filter-based monitor. Filter-based monitoring
provides information about a filter hit count, such as:
• Read command
• SCSI or IP traffic
• SCSI Read/Write
swBlmPerfFltAlias
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.4
Read only Alias name for the filter.
Object and OID Access Description
Object and OID Access Description
swTrunk
1.3.6.1.4.1.1588.2.1.1.1.24
Not
accessible
The OID sub-tree for swTrunk group.
swSwitchTrunkable
1.3.6.1.4.1.1588.2.1.1.1.24.1
Not
accessible
This object indicates whether the switch supports the trunking
feature or not:
• no (0)
• yes (8)
swTrunkTable
1.3.6.1.4.1.1588.2.1.1.1.24.2
Not
accessible
This object displays trunking information for the switch.
For the Brocade 4100, cc ports per trunk are supported.
swTrunkEntry
1.3.6.1.4.1.1588.2.1.1.1.24.2.
1
Not
accessible
Entry for the trunking table.