Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 169
53-1002151-01
Trunking group
6
swTrunkPortIndex
1.3.6.1.4.1.1588.2.1.1.1.24.2.
1.1
Read only This object identifies the switch port index.
The value of a port index is extracted from the second octet of the
port WWN stored in swFCPortWwn (refer to “swFCPortWwn” in the
Fibre Channel port group).
swTrunkGroupNumber
1.3.6.1.4.1.1588.2.1.1.1.24.2.
1.2
Read only This object is a logical entity that specifies the group number to
which the port belongs. If this value is 0, the port is not trunked.
swTrunkMaster
1.3.6.1.4.1.1588.2.1.1.1.24.2.
1.3
Read only Port number that is the trunk master of the group. The trunk master
implicitly defines the group. All ports with the same master are
considered to be part of the same group.
swPortTrunked
1.3.6.1.4.1.1588.2.1.1.1.24.2.
1.4
Read only The active trunk status of the member port.
Valid values:
• enabled (1)
• disabled (0)
swTrunkGrpTable
1.3.6.1.4.1.1588.2.1.1.1.24.3
Not
accessible
The table displays trunking performance information for the switch.
swTrunkGrpEntry
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1
Not
accessible
Entry for the trunking group table.
swTrunkGrpNumber
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1.1
Read only This object is a logical entity that specifies the group number to
which port belongs.
swTrunkGrpMaster
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1.2
Read only This object gives the master port ID for the trunk group.
swTrunkGrpTx
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1.3
Read only Gives the aggregate value of the transmitted words from this trunk
group.
NOTE: The syntax for this MIB variable is an OCTET STRING. The
output is shown in hexadecimal value. The value of
swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp
port. This value can be obtained through the CLI in the
output of the portStatsShow command (stat_wtx value) for
the corresponding trunk ports.
swTrunkGrpRx
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1.4
Read only Gives the aggregate value of the received words by this trunk group.
NOTE: The syntax for this MIB variable is an OCTET STRING. The
output is shown in hexadecimal value. The value of
swTrunkGrpRx is the 4-byte word received in the TrunkGrp
port. This value can be obtained through the CLI in the
output of the portStatsShow command (stat_wrx value) for
the corresponding trunk ports.
Object and OID Access Description