Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

xx Fabric OS MIB Reference
53-1002151-01
Document feedback
• Serial console and Telnet session logs
• syslog message logs
2. Switch Serial Number
The switch serial number and corresponding bar code are provided on the serial number label,
as illustrated below:
The serial number label is located as follows:
• Brocade 300, 4100, 4900, 5100, 5300, 6510, 7500, 7500E, 7800, 8000, VA-40FC, and
Brocade Encryption Switch—On the switch ID pull-out tab located inside the chassis on the
port side on the left
• Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of the
switch
• Brocade 5410, 5424, 5450, 5460, 5470, 5480—Serial number label attached to the
module
• Brocade 7600—On the bottom of the chassis
• Brocade 48000—Inside the chassis next to the power supply bays
• Brocade DCX and 8510-8—On the bottom right on the port side of the chassis
• Brocade DCX-4S and 8510-4—On the bottom right on the port side of the chassis, directly
above the cable management comb
3. World Wide Name (WWN)
Use the licenseIdShow command to display the WWN of the chassis. If you cannot use the
licenseIdShow command because the switch is inoperable, you can get the WWN from the
same place as the serial number, except for the Brocade DCX. For the Brocade DCX, access the
numbers on the WWN cards by removing the Brocade logo plate at the top of the nonport side
of the chassis.
Document feedback
Because quality is our first concern at Brocade, we have made every effort to ensure the accuracy
and completeness of this document. However, if you find an error or an omission, or you think that
a topic needs further development, we want to hear from you. Forward your feedback to:
[e-mail]
Provide the title and version number and as much detail as possible about your comment,
including the topic heading and page number and your suggestions for improvement.
*FT00X0054E9*
FT00X0054E9