Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

208 Fabric OS MIB Reference
53-1002151-01
Connectivity unit group
9
connUnitSensorMessage
1.3.6.1.3.94.1.8.1.6
Read only This describes the status of the sensor as a message. It may also
provide some information about the sensor, for example:
sensor 1: type 3 is OK, value is 33
Each contains the sensor status (and reading if applicable) in textual
format.
connUnitSensorType
1.3.6.1.3.94.1.8.1.7
Read only The type of component being monitored by this sensor.
Possible values are:
• unknown (1)
• other (2)
• battery (3)
• fan (4)
• power-supply (5)
• transmitter (6)
• enclosure (7)
• board (8)
• receiver (9)
The following mapping is for each individual sensor, where applicable:
swSensorType connUnitSensorType
1 (temperature) 8 (board)
2 (fan) 4 (fan)
3 (power supply) 5 (power supply)
connUnitSensorCharacte
ristic
1.3.6.1.3.94.1.8.1.8
Read only The characteristics being monitored by this sensor.
The following mapping is for each individual sensor, where applicable:
swSensorType connUnitSensorCharacteristic
1 (temperature) 3 (temperature)
2 (fan) 7 (airflow)
3 (power supply) 9 (power)
Possible values are:
• unknown (1)
• other (2)
• temperature (3)
• pressure (4)
• emf (5)
• currentValue (6) Current is a keyword.
• airflow (7)
• frequency (8)
• power (9)
• door (10) - Not supported in Fabric OS v2.6.1.
connUnitPortTable
1.3.6.1.3.94.1.10
Not
accessible
Generic information on ports for a specific connUnit
NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i
blade is not supported.
connUnitPortEntry
1.3.6.1.3.94.1.10.1
Not
accessible
Each entry contains the information for a specific port.
connUnitPortUnitId
1.3.6.1.3.94.1.10.1.1
Read only The connUnitId value of the connectivity unit that contains this port.
Same value as connUnitId.
Object and OID Access Description