Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 299
53-1002151-01
Aggregator port group
17
Aggregator port group
object and OID Access Description
dot3adAggPortTable
1.2.840.10006.300.43.1.
2.1
Not
accessible
A table that contains link aggregation control configuration information
about every aggregation port associated with the device. A row appears
in this table for each physical port.
dot3adAggPortEntry
1.2.840.10006.300.43.1.
2.1.1
Not
accessible
A list of link aggregation control configuration parameters for each
aggregation port on the device.
dot3adAggPortIndex
1.2.840.10006.300.43.1.
2.1.1.1
Read only The ifIndex of the port.
dot3adAggPortActorSyste
mPriority
1.2.840.10006.300.43.1.
2.1.1.2
Read-write A 2-octet read-write value used to define the priority value associated
with the actor's system ID.
dot3adAggPortActorSyste
mID
1.2.840.10006.300.43.1.
2.1.1.3
Read only A 6-octet read-only MAC address value that defines the value of the
system ID for the system that contains this aggregation port.
dot3adAggPortActorAdmin
Key
1.2.840.10006.300.43.1.
2.1.1.4
Read-write The current administrative value of the key for the aggregation port. This
is a 16-bit, read-write value. The meaning of particular key values is of
local significance.
dot3adAggPortActorOperK
ey
1.2.840.10006.300.43.1.
2.1.1.5
Read only The current operational value of the key for the aggregation port. This is
a 16-bit value. The meaning of particular key values is of local
significance.
dot3adAggPortPartnerAd
minSystemPriority
1.2.840.10006.300.43.1.
2.1.1.6
Read-write A 2-octet read-write value used to define the administrative value of
priority associated with the partner's system ID. The assigned value is
used, along with the value of aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and
aAggPortPartnerAdminPortPriority, in order to achieve manually
configured aggregation.
dot3adAggPortPartnerOpe
rSystemPriority
1.2.840.10006.300.43.1.
2.1.1.7
Read only A 2-octet read-only value indicating the operational value of priority
associated with the partner's system ID. The value of this attribute may
contain the manually configured value carried in
aAggPortPartnerAdminSystemPriority if there is no protocol partner.
dot3adAggPortPartnerAd
minSystemID
1.2.840.10006.300.43.1.
2.1.1.8
Read-write A 6-octet read-write MAC address value representing the administrative
value of the aggregation port's protocol partner's system ID. The
assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in
order to achieve manually configured aggregation.
NOTE: This object is not supported.