Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

ManualsBrandsHP ManualsComputer AccessoriesHP StorageWorks 4/256 SAN Director FICON CUP With Advanced Security OS

100

Fabric OS MIB Reference 79

53-1002151-01

fcFeStatus group

This group consists of tables that contain operational status and established service parameters

for the fabric element and the attached Nx_Ports.

Object and OID Access Description

fcFxPortStatusTable

1.3.6.1.2.1.75.1.2.1

Not accessible A table that contains operational status and parameters of the

Fx_Ports, one entry for each Fx_Port in the fabric element.

fcFxPortStatusEntry

1.3.6.1.2.1.75.1.2.1.1

Not accessible An entry containing operational status and parameters of an

Fx_Port.

fcFxPortID

1.3.6.1.2.1.75.1.2.1.1.1

Read only The address identifier by which this Fx_Port is identified within the

fabric. The Fx_Port might assign its address identifier to its attached

Nx_Ports during fabric login.

fcFxPortBbCreditAvailable

1.3.6.1.2.1.75.1.2.1.1.2

Read only The number of buffers currently available for receiving frames from

the attached port in the buffer-to-buffer flow control. The value

should be less than or equal to fcFxPortBbCredit.

NOTE: This object is not supported on the FC10-6 port blade.

fcFxPortOperMode

1.3.6.1.2.1.75.1.2.1.1.3

Read only The current operational mode of the Fx_Port.

Valid values:

• unknown (1)

• fPort (2)

• flPort (3)

fcFxPortAdminMode

1.3.6.1.2.1.75.1.2.1.1.4

Read only The desired operational mode of the Fx_Port.

fcFxPortPhysTable

1.3.6.1.2.1.75.1.2.2

Not accessible A table that contains the physical level status and parameters of the

Fx_Ports, one entry for each Fx_Port in the fabric element.

fcFxPortPhysEntry

1.3.6.1.2.1.75.1.2.2.1

Not accessible An entry containing physical level status and parameters of an

Fx_Port.

fcFxPortPhysAdminStatus

1.3.6.1.2.1.75.1.2.2.1.1

Read only The desired state of the Fx_Port. A management station might place

the Fx_Port in a desired state by setting this object accordingly.

Valid values:

• online (1)

• offline (2)

• testing (3)

The testing state (3) indicates that no operational frames can be

passed. When a fabric element initializes, all Fx_Ports start with

fcFxPortPhysAdminStatus in the offline state (2). As the result of

either explicit management action or per configuration information

accessible by the fabric element, fcFxPortPhysAdminStatus is then

changed to either the online (1) or testing (3) states or remains in

the offline state (2).