Brocade Fabric OS v6.4.3f Release Notes v1.0

Closed with Code Change in Fabric OS v6.4.3c
Fabric OS v6.4.3f Release Notes v1.0 Page 47 of 149
Defect ID:
DEFECT000412938
Technical Severity:
Medium
Summary:
Fabric Watch erroneously reporting a "build fabric"
Symptom:
On a busy switch, Fabric Watch falsely reports "build fabric" event.
Probability:
Low
Feature:
FOS Software
Function:
System Performance
Reported In Release:
FOS6.4.1
Service Request ID:
756411
Defect ID:
DEFECT000413879
Technical Severity:
Medium
Summary:
Unreachable switches are seen as Brocade 200E in Brocade Network Advisor dashboard.
Symptom:
When a switch is unreachable from BNA , BNA shows the switch type as 200E regardless of the
actual switch type. When the switch becomes reachable, then it will show the actual switchType in
BNA.
Probability:
Medium
Feature:
UNDETERMINED
Function:
Other
Reported In Release:
FOS6.4.1
Service Request ID:
756759
Defect ID:
DEFECT000414360
Technical Severity:
High
Summary:
"Redirect zone update failed" when issuing 'cryptocfg --commit'
Symptom:
After adding initiator to target container is performed, executing the 'cryptocfg --commit' command
results in the following failure: "Operation succeeded. Commit operation completed successfully,
Redirect zone update failed. Please retry commit operation." Additional attempts at commit do not
result in redirect zone creation success, and container remains offline.
Probability:
Medium
Feature:
Data Security
Function:
Disk Encryption
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000414491
Technical Severity:
High
Summary:
Switch panic during hafailover with Failed expression: (area == sw->sw_pt[port]->full_fmt_area
Symptom:
After user had performed port address binding in the past, a HAfailover caused a panic on new active
CP during taking over and triggered disruption
Probability:
Medium
Feature:
FOS Software
Function:
Panic / OOM
Reported In Release:
FOS6.4.2
Service Request ID:
759663
Defect ID:
DEFECT000415047
Technical Severity:
Medium
Summary:
Busy buffer stuck caused blades to be faulted
Symptom:
While diag is running on port blade, toggle slider on core blade can trigger busy buff stuck with traffic
issue on blade or blade fault.
Probability:
Low
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS6.4.2
Service Request ID:
761781
Defect ID:
DEFECT000415165
Technical Severity:
Medium
Summary:
A fast FLOGI frame comes in before the port state has changed to AC (Active online) caused various
switch problems.
Symptom:
In a mainframe setup, many Nport are bounced at the same time and some hosts cannot see storage.
Workaround:
Bounce the Fport using portdisable and then portenable to recover.
Probability:
Low
Feature:
FOS Software
Function:
Fabric Services
Reported In Release:
FOS6.4.2
Service Request ID:
SR 763577