Brocade Fabric OS v6.4.3f Release Notes v1.0

Close with Code Change in Fabric OS v6.4.2
Fabric OS v6.4.3f Release Notes v1.0 Page 97 of 149
Defect ID: DEFECT000329521
Technical Severity: Medium
Summary: FICON MIB traps missing .21 in their OID
Symptom: This will result in a mismatch between FICON link incident MIB trap OID prefix sent from a
switch with the actual OID values for these traps as per the MIB definition and MIB
reference manual.
Feature: Field Escalation
Function: SNMP
Probability: High
Found in Release: FOS6.4.1
Defect ID: DEFECT000330511
Technical Severity: Medium
Summary: Kernel panic encountered while accessing compact flash
Symptom: When writes to compact flash timeout, software reset recovery results in access to a bad
pointer to triggering switch panic. This will result in a switch reboot, though the probability
of this occurring is very low.
Feature: Field Escalation
Function: OS: Linux
Probability: Low
Found in Release: FOS6.2.1
Service Request ID: 492295
Defect ID: DEFECT000332040
Technical Severity: Medium
Summary: On the Brocade 8000, RX_COUNT does not increment if port 0 is included in eemonitor.
Symptom: RX_Count is misleading/invalid on the Brocade 8000 when including port 0
Feature: Field Escalation
Function: Management Services
Probability: High
Found in Release: FOS6.4.1
Service Request ID: 509089
Defect ID: DEFECT000333412
Technical Severity: Medium
Summary: FCP/SCSI tape I/Os failing when server and tape device connected over FCIP link between
Brocade 7800s
Symptom: Customer may experience I/O failures to tape over FCIP tunnel running near max
committed rate.
Feature: FCIP
Function: FCIP I/O
Probability: High
Found in Release: FOS6.4.1
Service Request ID: 492061
Defect ID: DEFECT000333569
Technical Severity: Medium
Summary: The data read from SFP through i2c might not be ready after reset.
Symptom: Customer may encounter erroneous port faults due to invalid SFP validation failures.
Feature: System Controls/EM
Function: Other
Probability: Low
Found in Release: FOS7.0.0