Fabric OS Documentation Updates Supporting Fabric OS v6.4.x

8 Fabric OS Documentation Updates
53-1002063-12
configure
3
configure
The description for the Enable 256 Area limit parameter option 1 incorrectly stated that mode 1 was
incompatible with domain index zoning. The sentence has been removed. The description of Enable 256
Area limit option 1 now reads:
1 The unique area assignments begin at zero regardless of where the port is
physically located. This allows FICON users to make use of high port count port
blades with port indexes greater than 256.
Documentation updates for Fabric OS v6.4.1
Revised commands in Fabric OS v6.4.1
Under the command cee-map, add the following Usage Guideline:
USAGE
GUIDELINES
The map name must begin with a letter, and can consist of letters, digits, hyphens, and underscore
characters. Spaces are prohibited. Special characters are not supported, and cause the name to
truncate.