HP StorageWorks Fabric OS 5.2.1b Release Notes (AA-RWEYC-TE, June 2007)
Enabling or disa
bling DHCP
To enable or disa
ble this feature:
1. Log in with the following default values:
•usernameadmin
• password passw
ord
2. Issue the ipaddrset command.
Using External DHCP to set the Ethernet IP address
NOTE:
This procedure applies to c-Class only.
To set the Ethernet IP address via DHCP:
1. Connect to the active OA via a web browser.
2. Document the D HCP-assigned address by selecting the switch from the GUI Rack O verview window.
3. Verify the IP address using a telnet or ssh login to the switch, or by selecting the switch in the OA
GUI Rack Overview window.
NOTE:
This procedure applies to p-Class only.
The HP p-Cla
ss BladeSystem architecture provides Ethernet (iLO) access to embedded SAN switches only
through an external R J45 c onnector on the switch; configuration is then similar to that for an external
SAN switch.
If the DHCP f
eature is enabled and a connection (Ethernet cable) exists from the p-Class SAN switch
to an Ethernet network where a DHCP service is active, the switch should request and obtain an IP
address automatically.
Additional enhancements
General enhancements include:
• The tstimezone command providing flexibility via an interactive way to support a new Daylight
Saving Time, based on country and region.
• Thenumberofuseraccountsincreasedfrom15to256.
• Zoning database size increased from 256 KB to 1 MB.
• Long distance mode simplification:
• LD is a dynamic distance mode that automatically discovers lengths and assigns the correct
amount of buffer credits with an Extended Fabrics license.
• LS is a static distance mode that allows yo u to specif y the number of buffer credits required
with an Extended Fabrics License.
• LE supports up to 10 kilom eters at any speed and does not require an Extended Fabrics license.
Prerequisites
Table 1 summarizes current Fabric OS firmware versions. These are the earliest r ecommended software
versions that work together. However, HP recommends using the latest supported firmware release
versions to get the greatest benefitfromtheSAN.
HP StorageWorks Fabric OS 5.2.1b release notes
7