HP StorageWorks Fabric OS 5.3.0d Release Notes (AA-RWEYH-TE, December 2007)

Closed defec t su mmary
Solution
Collecting supportsave info on 4/256 could cause error message
on active CP console log.
Fixed per Fabric OS 5.3.0
Host tak es a long time to log in when disabled/unused GE-iSCSI
ports have IP addresses configured to them. When host does a
"SendTargets=All" those IP addresses will be in the list, but will be
unreachable.
Fixed per Fabric OS 5.3.0
After changing B ackbone FID, switchshow doesn’t display LE port
information for some EX or VEX ports. Ports function correctly, only
the display is incorrect.
Fixed per Fabric OS 5.3.0
On FC4-16IP iSCSI Blade, console log for iSNS reports the
management p
ort as slot/port 0/0.
Fixed per Fab
ric OS 5.3.0
With multiple FC 4-16IP blades in multiple 4/256 directors in the
fabric and ISNSC enabled, iSNS error message is logged on only
oneswitch,butshouldbeloggedonallswitchesinthefabric.
Fixed per Fabric OS 5.3.0
May not see the targets after successful iSCSI login with FC4-16IP
using AIX if immediate data is enabled.
Fixed per Fabric OS 5.3.0
LE ports no
t up after trunk disable/enable as evidenced by EX_Port
not coming
online.
Fixed per Fabric OS 5.3.0
Switchshow shows EX_Port lef t disabled after it’s enabled due to
setting VC Credits failure. In addition, when EX_Port trunk m aster is
unplugged, non-trunk master ports are disabled.
Fixed per Fabric OS 5.3.0
Execquery Brocade_SwitchFcPortRateStats is not returning
correct Instances. When Admin Domain’s are created on th e switch
side without stopping the SM I-A, it always returns Instances with
respect to Admin Doma in0.
Fixed per Fabric OS 5.3.0
Sometimes when trying to add/modify Admin D o main list for multiple
user acc
ounts simultaneously, Admin Domain list for user accounts
change
s.
Fixed per Fabric OS 5.3.0
Port detail report shows incorrect values for iSCSI ports with FC4-16IP
Blade.
Fixed per Fabric OS 5.3.0
swFCPortOpStatus of swFCPortScn is not reported correctly.
Fixed per Fabric OS 5.3.0
Excess
ive logi n s cause out-of-memory (OOM) panic while switching
betwee
nuserrolesandexecutingConfigshow command.
Fixed per Fabric OS 5.3.0
Vulnerabilities reported about open SSL VU#386964 & VU#547300.
For VU#547300:OpenSSL SSL_get_shared_ciphers() vulnerable to
buffer overflow . For VU#386964:OpenSSL SSLv2 client code fails to
properly check for NULL.
Fixed per Fabric OS 5.3.0
Denial-of-Service condi tion affecting X.509 certificates verification
(NISCC #729 618) due to SSL vulnerability in OpenSSL. FOS 5.3.0
includes new version of OpenSSL that resolves this.
Fixed per Fabric OS 5.3.0
Incorrect time in Web Tools Switch H ealth report. Fixed per Fabric OS 5.3.0
IncorrectF_PortbehaviorwhenRXsideofthecableisdisconnected,
while the TX side is still inserted.
Fixed per Fabric OS 5.3.0
Installation of PKI certificate is delayed on any switch on which
installation is attempted due to timing of the startup function.
Fixed per Fabric OS 5.3.0
The last character of config uploaded Banner (via “bannerset” CLI
com
mand) will disappear when performing a configupload
followed by configdownload.
Fixed per Fabric OS 5.3.0
When connected to i10k Director in open mode, an RSCN received
from the i10 k was not immediately forwarded.
Fixed per Fabric OS 5.3.0
HP StorageWorks Fabric OS 5.3.0d release notes
23