HP Surestore Auto Path Virtual Array for Windows NT Installation and User's Guide

2
Notice
© Hewlett-Packard Company, 2001. All rights reserved.
Hewlett-Packard Company makes no warranty of any
kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and
fitness for a particular purpose. Hewlett-Packard shall not
be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing,
performance, or use of this material.
This document contains proprietary information, which
is protected by copyright. No part of this document may
be photocopied, reproduced, or translated into another
language without the prior written consent of
Hewlett-Packard. The information contained in this
document is subject to change without notice.
Safety Instructions
Denotes:
WARNING A hazard that can cause personal
injury
Caution A hazard that can cause hardware or
software damage
Note Significant concepts or operating
instructions
Trademark Information
Microsoft, Windows NT, and Windows 2000 are
registered trademarks of Microsoft Corporation
Java and all Java-based marks are trademarks or
registered trademarks of Sun Microsystems, Inc. in
the United States and other countries.
HP, is a registered trademarks of Hewlett-Packard
Company.
Command View, Secure Manager, Business Copy,
Auto Path, Smart Plug-Ins are trademarks of
Hewlett-Packard Company
Format Conventions
literal Specifies text to be typed exactly
as shown, such as commands,
path names, file names, and
directory names.
variable Indicates that you must supply a
value.
output Denotes text displayed on the
screen.
{ } Indicates that you must specify
one of the listed options.
| Separates alternatives.