HP Surestore Auto Path Virtual Array for Windows NT Installation and User's Guide

autopath paths device
Command-line interface 63
autopath paths device
Display paths to device
Description The autopath paths device command displays the paths to the selected
device referenced by the device number.
Syntax autopath paths device=device_number
device_number The Auto Path index number shown in the autopath
devices command line display.
Example The device for this example has a defined load balancing policy.
HP Auto Path> autopath paths device=1
Device Name: HP OPEN-3
Device Serial Number: 0400756000E2
Path# Controller Port# State Scsi Port# Bus# TID Lun#
-------------------------------------------------------------------------
1 6 Active 3 4 0 0
2 22 Active 3 4 1 0